Emerson DeltaV,Allen Bradley Controller Module,General Electric CPU Module

Allen-Bradley 1492-AIFM8-3 Analog Interface Module

Tags :

The Allen-Bradley 1492-AIFM8-3 is an 8-channel feed-through analog interface module. It features three terminals per channel for device and shield connections, and includes an internal power bus with eight common terminals to simplify wiring and reduce external terminal block needs.

view detail

Honeywell C7027A1049 FLame Sensors

Tags :

The Honeywell C7027A1049 Minipeeper is an ultraviolet flame detector designed for oil, gas, and coal burners. It operates in temperatures from -18°C to 102°C and is compatible with multiple Honeywell flame safeguard amplifiers.

view detail

Deep Sea DSE7320 MKII Generator Controller

Tags :

The Deep Sea DSE7320 MKII is a generator controller featuring Stop/Reset and Test Modes for safe operation. It manages engine shutdown and test starts, and includes an advanced scheduler for automated exercise runs.

view detail

Woodward 5466-353 Thermocouple Input Module

Tags :

The Woodward 5466-353 is a thermocouple input module that provides isolated, accurate temperature measurement for industrial control systems, made in the USA.

view detail

General Electric IS200STAIH2ACB/IS230STAIH2A Speedtronic Turbine Controller

Tags :

The General Electric IS200STAIH2ACB/IS230STAIH2A is a compact, surface-mount analog input terminal board for the Mark Vle control system, designed for reliable operation in industrial environments.

view detail

General Electric IC200BEM002 VersaMax Communication Cards

Tags :

General Electric IC200BEM002 is a Profibus-DP network slave module for PLC systems. It supports up to 32 stations (125 with repeaters) and features a 9-pin D-sub connector, handling 384 bytes of I/O data with a configurable baud rate.

view detail

Bently Nevada 3500/53M 286566-01 Overspeed Detection Module

Tags :

Bently Nevada 3500/53M (286566-01) is a galvanic isolator interface module, part of an intrinsically safe system. It provides isolation for vibration, temperature, and process variable transducers installed in hazardous areas, connecting them safely to a 3500 series monitoring system.

view detail

Bently Nevada 330400-01-CN Accelerator

Tags :

Bently Nevada 330400-01-CN is a high-performance accelerometer for casing vibration and gear mesh monitoring. It meets API 670 standards with a 100 mV/g sensitivity and a 50 g peak range. It features a 1/4-28 UNF integral stud and carries multiple international approvals for critical machinery protection.

view detail

Bently Nevada 330180-12-CN 3300 XL Proximitor Sensor

Tags :

The Bently Nevada 330180-12-CN is a Proximitor Sensor for the 3300 XL 8 mm transducer system. It features a 1.0-meter system length, offers API 670-compliant performance, and carries CSA, ATEX, and IECEx approvals for hazardous locations.

view detail

Bently Nevada 330780-90-CN 11 mm Proximity Sensor

Tags :

The Bently Nevada 330780-90-CN is a 3300 XL series, 11 mm Proximitor Sensor with a 9.0-meter system length. It is designed for panel mount installation in vibration monitoring systems and carries multiple international approvals for reliable operation.

view detail

Bently Nevada 330901-00-90-10-02-CN 3300 NSv Proximity Probes

Tags :

The Bently Nevada 330901-00-90-10-02-CN is a 1/4-28 UNF thread NSv proximity probe designed for tight-clearance applications. It features a long 9.0-inch case, a standard 1-meter cable with a ClickLoc connector, and multiple agency approvals for radial vibration and axial position measurements.

view detail

Bently Nevada 330101-00-20-10-02-CN Precision Eddy-current Proximity Probe

Tags :

The Bently Nevada 330101-00-20-10-02-CN is an 8 mm armored proximity probe with a 3/8-24 UNF thread and a 1.0-meter standard ClickLoc cable. It delivers API 670-compliant performance, is fully interchangeable within the 3300 series, and carries CSA, ATEX, and IECEx approvals.

view detail

Bently Nevada 330101-00-20-20-02-CN Proximity PLC Controller

Tags :

The Bently Nevada 330101-00-20-20-02-CN is a versatile 8 mm proximity probe with a 3/8-24 UNF thread and a 2.0-meter cable. It features a standard ClickLoc connector, CSA/ATEX/IECEx approvals, and is fully interchangeable within both XL and non-XL 3300 series systems.

view detail

Bently Nevada 330102-00-35-10-02-CN Proximity Sensor Probe

Tags :

The Bently Nevada 330102-00-35-10-02-CN is a 1.0-meter armored 8 mm proximity probe with a 3/8-24 UNF thread. It is fully interchangeable within the 3300 XL system and carries CSA, ATEX, and IECEx approvals for hazardous locations.

view detail

Bently Nevada 330101-00-11-20-02-CN 8mm Vibration Sensor

Tags :

The Bently Nevada 330101-00-11-20-02-CN is an 8 mm proximity probe with a 3/8-24 UNF thread and a 2.0-meter cable. It features a standard ClickLoc connector and carries major hazardous area approvals (CSA, ATEX, IECEx) for reliable performance in the 3300 XL system.

view detail

Bently Nevada 330101-00-13-15-02-CN 3300 XL Sensor Probe Cables

Tags :

The Bently Nevada 330101-00-13-15-02-CN is a core 8 mm proximity probe for the 3300 XL system. With a 1.5-meter cable and ClickLoc connector, it features robust TipLoc and CableLoc designs for reliability in vibration and position measurement applications.

view detail

Bently Nevada 330103-00-10-05-02-CN Vibration Proximity Sensor

Tags :

The Bently Nevada 330103-00-10-05-02-CN is an 8 mm proximity probe designed for the 3300 XL system. It features an M10x1 thread, a compact 100 mm case, and a short 0.5-meter cable with a ClickLoc connector, ideal for tight installations and hazardous areas with its CSA, ATEX, and IECEx approvals.

view detail

Bently Nevada 330103-00-07-10-02-CN 3300 XL 8 mm Probe

Tags :

The Bently Nevada 330103-00-07-10-02-CN is a standard 8 mm proximity probe with an M10x1 thread and a 1-meter cable. It features a miniature coaxial ClickLoc connector for reliable connections and carries CSA, ATEX, and IECEx approvals for hazardous environments.

view detail

Bently Nevada 330190-085-00-00 3300 XL Standard Extension Cable

Tags :

The Bently Nevada 330190-085-00-00 is an 8.5-meter extension cable for the 3300 XL series. It features 75-ohm triaxial FEP-insulated cable for high-fidelity signal transmission, connecting proximity probes to Proximitor sensors in demanding industrial environments.

view detail

Bently Nevada 330703-000-040-10-02-05 Proximity Switch

Tags :

The Bently Nevada 330703-000-040-10-02-05 is an 11 mm proximity probe designed for the 3300 XL transducer system. Featuring an M14x1.5 thread and a 1-meter standard cable with a ClickLoc connector, it is used for thrust position and differential expansion measurements.

view detail

Manufactures

Manufactures

Categories