CPU 414-3 processing with MPI, PROFIBUS DP and IFM connectivity.
The Siemens 6ES7414-3XJ00-0AB0 is a SIMATIC S7-400 CPU 414-3 for modular automation systems. Its 768 KB work memory is divided into 384 KB for code and 384 KB for data. Communication resources include an MPI/DP interface operating up to 12 Mbit/s, a PROFIBUS DP interface and an interface for IFM. Siemens lists the official lifecycle wording as End Prod.Lifecycl. and notes that only residual quantities are available. Procurement teams should compare the complete suffix, rack configuration, memory requirements, interface use, project backup and firmware before replacing an installed CPU.
| Product condition | Original new |
|---|---|
| Availability | In stock |
| Official life cycle | End Prod.Lifecycl. |
| Official supply note | Only residual quantities available |
| Warranty | With 1 year warranty |
Condition, availability and warranty are Stockoems commercial information, not manufacturer commitments.
| Manufacturer | Siemens |
|---|---|
| Complete part number | 6ES7414-3XJ00-0AB0 |
| Product type | SIMATIC S7-400 CPU 414-3 |
| System | SIMATIC S7-400 |
| Work memory | 768 KB |
| Memory split | 384 KB code and 384 KB data |
| Interface 1 | MPI/DP, up to 12 Mbit/s |
| Interface 2 | PROFIBUS DP |
| Interface 3 | Interface for IFM |
| Official supply note | Only residual quantities available |
| Country of origin | GERMANY |
| Shipping | Worldwide shipping coordination after destination review |
The CPU provides 384 KB for code within 768 KB total work memory.
Managed forwarding supports 384 KB code and 384 KB data network segments.
MPI/DP, PROFIBUS DP and IFM interfaces connect the controller architecture.
| S7-400 controller racks | Runs modular control programs in installed SIMATIC S7-400 automation systems. |
| MPI and DP networks | Supports controller communication through the integrated MPI/DP interface. |
| PROFIBUS automation | Connects distributed automation devices through the PROFIBUS DP interface. |
| Installed-base maintenance | Supports exact-order-code replacement planning for established CPU 414-3 systems. |
Confirm the complete suffix, S7-400 rack configuration, 768 KB memory requirement, MPI/DP and PROFIBUS DP assignments, IFM use, firmware, project backup and hardware configuration before replacement.
Yes. Siemens identifies this complete order code as a SIMATIC S7-400 CPU 414-3 with 768 KB work memory.
Siemens lists the lifecycle wording as End Prod.Lifecycl. and states that only residual quantities are available.
The 768 KB work memory is divided into 384 KB for code and 384 KB for data.
Compare the full suffix, S7-400 rack, memory needs, interface assignments, firmware, project backup and hardware configuration.
No. Original new condition, in-stock availability and the one-year warranty are Stockoems commercial information.
Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
A structured service route for industrial automation procurement, condition review, protective handling and after-sales communication.
| Gate | Service stage | Checks and deliverables |
|---|---|---|
| 01 | Identity verification | Model and suffix verification plus product and label photo confirmation. |
| 02 | Condition review | Condition confirmation, housing review and visible connector inspection. |
| 03 | Compatibility check | Technical compatibility review covering suffix, S7-400 rack, memory, interfaces, firmware and project configuration. |
| 04 | Packing preparation | Protective packaging selected for the equipment size, exposed connectors and transport route. |
| 05 | Logistics coordination | Worldwide shipping, shipment tracking and customs documentation prepared after destination review. |
| 06 | After-sales support | Written warranty terms, return authorization process and after-sales response channel. |
Order code, suffix and label data are compared before commercial confirmation. Available product photos support visible-condition review.
Connectors, housing and rack interfaces receive protective handling suited to modular PLC equipment.
Destination, consignee details and shipment requirements are reviewed before customs documents and tracking information are prepared.
Look for complete part-number discipline, clear condition descriptions, label-photo support, written warranty terms and a defined return authorization process.
Request model and suffix verification, condition confirmation, available label photos, packaging information, shipping scope and written commercial terms.
Engineers should compare the complete suffix, rack configuration, memory requirement, MPI/DP and PROFIBUS assignments, IFM use, firmware and project backup.
Risk signals include shortened or changed suffixes, reused specifications from another model, unclear condition language, refusal to provide available label evidence, unsupported lead-time claims and missing return terms.
Share the complete part number, required quantity, destination country and available product label photos for a structured review.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
