The General Electric IC200CPUE05-JP is a powerful VersaMax controller with 64KB memory. It features versatile RS232, RS485, and Ethernet ports, supporting up to 2048 I/O points for robust automation control.
The General Electric IC200ETM001 is a VersaMax expansion connector. It enables the PLC system to support up to seven additional I/O racks for greater configuration flexibility.
The General Electric IC200ALG266 is a 15-channel analog input module designed for current signals. It is certified for use in safety-critical control applications.
The General Electric IC200UDR005-CH is a 28-point VersaMax micro PLC powered by 120/240 VAC. It features 16 digital inputs, 11 relay outputs, and one 24VDC output.
The ABB AI801 (3BSE020512R1) is an 8-channel analog input module designed for current signals. It features built-in short-circuit protection up to 30 V DC and utilizes a PTC resistor for current limiting, with a total input resistance of 250 ohms.
The ABB IMMPI01 is a Multi-Function Processor Interface used in ABB/Bailey control systems. It facilitates communication and data exchange between processors and modules within industrial automation environments like power plants and refineries.
The ABB INNIS21 is a Network Interface Module that serves as the intelligent front-end for Cnet communication within Symphony systems. It allows nodes to communicate with each other and is a direct upgrade from the INNIS11, requiring the INNPM22 module to function.
The Woodward 5464-654 is a 32-channel discrete output module. It provides control signals to external Woodward relay modules for prime mover operation without needing calibration or potentiometers.
The Bently Nevada 330104-04-09-50-02-02 is an 8 mm armored proximity probe with M10x1 thread, designed for vibration and position measurement. It features a minimum unthreaded length of 40 mm, case length of 90 mm, and a 5-meter ClickLoc cable. This model complies with API 670 and holds CSA, ATEX, and IECEx certifications for hazardous area use.
The Bently Nevada 330104-01-05-50-02-02 is an 8 mm proximity probe with an M10x1 threaded armor design. It features a minimum unthreaded length of 10 mm, a case length of 50 mm, and comes with a 5.0-meter standard cable equipped with a miniature coaxial ClickLoc connector. This model holds CSA, ATEX, and IECEx approvals for use in hazardous environments.
The Bently Nevada 130938-01-10-01 is a vibration probe with a sensitivity of 7.87 mV/µm and a frequency range of 0-10 kHz. It operates on -17 to -26 V DC and offers high linearity (<0.025 mm) and low temperature drift. Made in the USA, it is designed for precise vibration monitoring in industrial applications.
The Bently Nevada 330901-10-40-10-02-00 is a key component of the 3300 XL NSv Proximity Transducer System. It is a standard-length proximity probe with a miniature coaxial ClickLoc connector, designed for vibration and displacement monitoring in compressors and other machinery with limited installation space.
The Woodward 5466-353 is a Netcon Main Chassis Transceiver Module designed for high-speed data transmission in turbine control systems. Operating at 24 Vdc, it features wide temperature tolerance (-40°C to +85°C), transient protection, and a 24-character LED display. Made in the USA, it ensures reliable network connectivity with low latency.
The Woodward 5464-334 is an isolated 8-channel analog input module designed for 4-20mA signals. It provides channel-to-channel isolation for accurate measurement and integrates an onboard microcontroller with diagnostic LED indication. This module is part of the 5400 Series used in turbine control systems.
The Woodward 5466-348 is a Netcon SIO module with three RS-485 ports, operating at 417 kbaud. It supports communication with EM or GS/LQ digital actuator drivers, cycling one driver per port every 5 ms. This module is made in the USA and is currently in stock.
The Woodward 5464-643 is a 48-channel optically isolated discrete input module. It receives field switch and relay signals via two 24Vdc FTMs, with data processed through VME interface by the CPU. Made in the USA, it is designed for MicroNet control systems.
The Allen-Bradley 80026-518-01-R is a discontinued, multi-output DC switching power supply. It accepts a 56 VDC input and provides three output voltages: 5V, 15V, and 24V, with respective currents of 5A, 2A, and 1A, distributed across seven total output terminals.
The Siemens 6ES7400-2JA00-0AA0 is a high-availability UR2-H rack for S7-400H systems, featuring two 9-slot segments with independent buses, global certifications, and stable operation up to 60°C.
The Siemens 6AV2128-3MB06-0AX1 is a 12.1-inch TFT Unified Comfort Panel supporting multi-touch operation with 16 million colors. It features a PROFINET interface and is configured via WinCC Unified Comfort V16, designed for 24V DC vertical mounting.
The Siemens 6ES7 221-1BH32-0XB0 Input Module is a 16-channel, 24 VDC digital input module for S7-1200 PLCs. It offers flexible parameterizable input delays, integrated diagnostics, and supports sink/source wiring in a compact IP20 design.