Analog web-tension measuring amplifier with adjustable gain, filtering and voltage or current outputs.
FMS EMGZ306A is an analog tension measuring amplifier for converting force-sensor signals into standard voltage and current outputs. The exact FMS operating manual specifies adjustable gain from 500 to 5000, ±10 V and 0/4–20 mA outputs, an adjustable low-pass frequency and a 24 V DC nominal supply. It is intended for web-tension and force-measurement systems where the connected sensor, output format, scaling, filtering and control-system input must be checked before procurement.
| Item | Details |
|---|---|
| Manufacturer | FMS |
| Supply | Availability and condition are verified for each inquiry |
| Official Lifecycle | No current lifecycle wording confirmed in the exact FMS source reviewed |
| Warranty | Warranty terms confirmed with the quotation |
| Shipping | Worldwide delivery coordination available |
Commercial availability, condition and warranty are Stockoems supply information, not manufacturer commitments.
| Parameter | Verified Detail |
|---|---|
| Complete Part Number | EMGZ306A |
| Product Type | Analog tension measuring amplifier |
| Sensor Excitation | 5 V DC, maximum 30 mA; 10 V DC option |
| Gain Factor | 500–5000 |
| Input Offset Range | ±9 mV |
| Linearity Error | Less than 0.1% |
| Voltage Output | ±10 V; minimum load 1 kΩ |
| Current Output | 0/4–20 mA; maximum load 500 Ω |
| Low-Pass Cut-Off | Approximately 1–1000 Hz, adjustable |
| Power Supply | 24 V DC nominal; 18–36 V DC, maximum 0.1 A |
| Power Consumption | Maximum 2.5 W |
| Operating Temperature | −10 to +60 °C |
| Degree of Protection | IP20 |
Used in web-tension measurement and closed-loop control systems for paper, film, foil, textile, wire and converting machinery. The amplifier conditions sensor signals for PLC, drive or controller analog inputs during tension indication, regulation and machine retrofit work.
The exact FMS operating manual reviewed provides technical and commissioning information for EMGZ306A but does not state a current manufacturer lifecycle designation. This page therefore does not infer Active, Discontinued or another status. Confirm current FMS lifecycle information separately when required for project governance.
Contact Stockoems for supply verification, compatibility review, worldwide delivery coordination and warranty terms.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
Practical support for identification, inspection, packing and international delivery of industrial automation parts.
Send the part number, quantity, destination and application notes for a focused response.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
