Bently Nevada 330104-00-10-05-01-BR 3300 XL 8 mm Probe

Bently Nevada 330104-00-10-05-01-BR 3300 XL 8 mm armored metric probe

Inquiry now

330104-00-10-05-01-BR Product Overview

The 330104 base identifies an M10 x 1 metric 3300 XL 8 mm probe with armor. This short-lead configuration is suited to metric bearing-housing installations, but the BR suffix must be matched to the required certificate and the complete system configuration.

Important: Provide the complete label, installed Proximitor and extension-cable numbers, required system length, target material and approval requirement.

Key Product Information

Product family	M10 x 1 metric thread with armor
Mechanical configuration	0 mm unthreaded length and 100 mm case length
Length / size	0.5 m total length
Connector / cable	ClickLoc connector with connector protector, standard cable
Selection note	BR country/approval suffix requiring certificate confirmation

Ordering Code Explained

The following breakdown is provided to help customers compare the exact label with the required configuration. The written quotation and label evidence take precedence.

Code	Meaning for this listing
330104	3300 XL 8 mm probe, M10 x 1 thread, with armor
00	0 mm unthreaded length
10	100 mm overall case length
05	0.5 m total length
01	ClickLoc connector with protector, standard cable
BR	Country-specific approval suffix; verify required certification

Functions and Typical Applications

The 3300 XL 8 mm family is commonly considered for:

Metric bearing-housing shaft vibration measurement
Axial position and displacement monitoring
Keyphasor and speed measurement
Industrial rotating equipment requiring armored lead protection

Compatibility and Replacement Checks

Match the probe and extension-cable combined length to the 3300 XL 8 mm Proximitor Sensor system length. Confirm that the BR approval marking is acceptable for the destination and installation.

Before ordering: Provide the complete label, installed Proximitor and extension-cable numbers, required system length, target material and approval requirement.

What to Include in Your RFQ

Manufacturer and complete part number, including every suffix
Clear photos of the product label, connector and cable condition when available
Installed probe, extension cable and Proximitor or monitoring-system numbers
Required quantity, acceptable product condition and destination country
Approval, certificate, firmware, revision or packaging requirements

Inspection, Warranty and Shipping

Stockoems is operated by Apter Power Limited as an independent reseller of industrial automation products. Before dispatch, available product and label information can be checked against the written order requirements. Learn about our Quality Control, Company Verification, Shipping Policy, Warranty Policy and Return Policy.

Technical reference: Stockoems Technical Resources — 3300 XL 8 mm documentation. Manufacturer documentation should be used together with the exact product label and application requirements.

Frequently Asked Questions

What is 330104-00-10-05-01-BR?

330104-00-10-05-01-BR is an M10 x 1 armored metric probe with a 100 mm case, 0.5 m total length, connector protector and BR approval suffix.

How should the ordering code be checked?

Read every character from the product label and compare the base model, mechanical dimensions, lead or cable length, connector option and approval suffix with the quotation. The complete part number matters; similar-looking probes are not automatically interchangeable.

Which system components must match?

Match the probe and extension-cable combined length to the 3300 XL 8 mm Proximitor Sensor system length. Confirm that the BR approval marking is acceptable for the destination and installation.

What information is needed for a replacement inquiry?

Provide the complete label, installed Proximitor and extension-cable numbers, required system length, target material and approval requirement.

Can Stockoems confirm condition and availability?

Yes. Stockoems can quote available condition options after checking the requested quantity and sourcing status. Condition, photographs, lead time and included accessories are confirmed in writing before an order is accepted.

Does the part include the full monitoring system?

Unless the quotation specifically lists additional components, the offer applies only to the part number shown. Proximitor Sensors, extension cables, housings, monitors, software and installation accessories are separate items.

Request a Written Quotation

Send the complete part number and system information so our team can verify availability, condition, lead time and shipping terms.

Contact Stockoems

Bently Nevada and related manufacturer names are used for product identification only. Stockoems / Apter Power Limited is an independent reseller and is not presented as the original manufacturer or an authorized distributor unless expressly stated in writing.

BENTLY NEVADA PROCUREMENT SUPPORT

Service for 330104-00-10-05-01-BR

Our RFQ process focuses on exact identification and documented compatibility for Armored metric 3300 XL 8 mm proximity probe.

1 · Part-number check
We record the complete 330104-00-10-05-01-BR order string and compare label evidence.

2 · Configuration review
System length, mounting, connector, approval and modification fields are reviewed where applicable.

3 · Official-data check
Public Bently Nevada datasheets are used for supported system and ordering information.

4 · Quotation and shipping
Condition, quantity, lead time, packing, destination and commercial terms are confirmed in writing.

Information Required

Exact part number and quantity
Clear photos of the existing nameplate, connector and mounting
Machine, monitor and sensor-system model numbers
BOM, drawing or maintenance-record reference
Destination and requested delivery date

Compatibility notice: Similar descriptions do not prove interchangeability. Installation and machine-protection work must follow applicable Bently Nevada manuals and site procedures.

Email: sales6@apterpower.com WhatsApp: +86 181 5988 9985