A machine-case sealing accessory for transducer cables passing from the lubricated side to the low-pressure side.
The outer jacket or body of correctly installed transducer cables, primarily where lube oil must be contained across the machine-case penetration.
Internal leakage through a damaged cable, probe or connector. Cable condition must be checked separately during the outage.
Pressure direction is high side to low side. Confirm the site medium, pressure and installation arrangement before use.
| □ Count cables through the penetration | □ Identify 95 Ω or 25/50 mm DE cable type |
| □ Confirm 1/2-14 NPT on both sides | □ Inspect jackets for cuts or oil tracking |
| □ Record process medium and pressure | □ Plan access and replacement quantity |
Official accessory reference: Baker Hughes / Bently Nevada 3300 XL Transducer Accessories datasheet. Stockoems operates independently.
A customer searching for a Bently Nevada 43501-01-04-01 cable seal normally needs the part available before a planned machine shutdown. The correct decision is based on the high-pressure thread, number and type of cables through the grommet, low-pressure thread, medium and pressure direction.
This low-pressure seal is primarily intended for lube-oil service. It seals around applicable cable outer jackets or bodies; it cannot correct leakage traveling internally through a damaged cable, probe or connector. Cable condition should therefore be inspected during scope preparation.
| Penetration | Photograph both sides and record accessible thread details. |
| Cable count | Count occupied and spare openings; confirm the 04 grommet capacity. |
| Cable family | Identify applicable 95 Ω or 25/50 mm differential-expansion cables. |
| Service | Record lube oil or other medium, normal pressure and maximum pressure. |
| Timing | State outage start, installation window and destination. |
Depressurize and make the machine safe under the customer’s approved outage procedure before disturbing a case penetration. Inspect cable jackets and connectors, use the correct thread-sealing method for the site, and confirm pressure direction. Installation should be completed by qualified personnel.
The 345 kPa (50 psi) reference applies high side to low side as specified in the official accessory data. Site engineering must confirm suitability for the actual medium, temperature and pressure.
Send cable count/type, photos of both penetration sides, thread confirmation, medium, pressure, quantity, destination and outage date.
Email outage RFQ WhatsApp seal checkTechnical basis: official Bently Nevada 3300 XL Transducer Accessories datasheet. Suitability and installation remain subject to the customer’s machinery and safety procedures. Reviewed 12 August 2026.
OUTAGE DELIVERY DESK
Commercial timing is organized around the customer’s outage date and the correct cable-penetration configuration.
Order early enough for quotation review, payment clearance, inspection, carrier transit, customs and site receiving. A courier transit estimate is not the same as a guaranteed outage arrival date. Ask for available stock and estimated dispatch in writing.
| Carrier options | DHL, FedEx or SF according to destination and agreed service |
| Tracking | Released after courier collection |
| Warranty | 12 months for quality issues, subject to quotation/PI terms |
| Arrival issue | Preserve carton, courier label and product evidence; report with invoice number and photos |
Final payment method, dispatch estimate, freight, Incoterm, duty/tax responsibility and warranty scope follow the written commercial offer.
43501 family
Choose high-side thread, grommet cable capacity and low-side thread as three separate ordering decisions.
43501-01-04-01
1/2-14 NPT / up to four applicable cables / 1/2-14 NPT.
10076 high-pressure cable seal
Different pressure/application class. Do not use it as an automatic substitute for 43501.
CABLES & PROBES IDENTIFIED IN THE SUPPLIED FILES
Each model matches Bently Nevada. The table supports outage planning, but cable diameter, jacket condition, cable count and grommet capacity must still be verified.
| Model from file | Matched brand / type | Seal-planning relevance | Source |
|---|---|---|---|
| 330130-040-00-05 | Bently Nevada · 3300 XL extension cable | Candidate cable through a machine-case penetration; verify outer body/jacket fit. | 7.13-7.17.txt |
| 330130-045-00-05 | Bently Nevada · 3300 XL extension cable | Record cable count and armor/jacket arrangement before selecting the 04 grommet. | 7.13-7.17.txt / 7.20-7.24.txt |
| 330130-075-01-05 | Bently Nevada · 3300 XL extension cable | Different cable options may change the penetration arrangement; inspect physically. | 7.6-7.10.txt |
| 330930-045-02-00 | Bently Nevada · 3300 NSv extension cable | NSv-family cable; verify body diameter and whether it is an applicable cable for this grommet. | 7.13-7.17.txt |
| 330930-045-02-05 | Bently Nevada · 3300 NSv extension cable | Same planning rule: validate cable construction and grommet fit before the outage. | 7.6-7.10.txt |
| 330103-00-04-10-02-05 | Bently Nevada · 3300 XL 8 mm probe | Probe assembly reference helps identify the connected cable system; probe identity alone does not prove seal fit. | 7.6-7.10.txt |
| 330106-05-30-05-02-05 | Bently Nevada · 3300 XL probe family | Use the complete probe/cable chain during penetration survey and spare planning. | 7.13-7.17.txt |
