The 330104-05-12-10-02-00 is a high-performance 3300 XL 8mm proximity probe featuring an M10x1 metric thread, a 120mm overall case length, and a 50mm unthreaded section. Fully enclosed with stainless steel armor and a protective FEP outer jacket, this unit works seamlessly with 3300 XL Proximitor sensors to deliver flexible air-gap adjustments within deep bearing housings and highly stable industrial vibration monitoring without risking cable slicing in harsh machinery environments.
Features and benefits
- Provides precise vibration and position measurement for rotating equipment
- Output signal directly proportional to probe distance ensures accuracy
- Complies with API 670 standards for reliability and performance
- Fully interchangeable components reduce installation complexity
- Compatible with other 3300 series systems for flexible use
- Supports both static and dynamic monitoring applications
Specific Application
- Radial vibration and axial thrust position measurements inside medium-to-deep bore bearing housings on industrial machinery.
- Applications requiring a 50mm unthreaded length to ease adjustments and prevent thread binding inside thick-walled casing structures.
- Severe operational pathways containing sharp internal brackets or heavy debris that demand a rugged stainless steel armor shroud to protect the transducer lead.
System Compatibility, Alternative Models, and Differences
- System Compatibility:
Fully compatible with the Bently Nevada 3300 XL Proximitor Sensor (e.g., 330180) and 3300 XL Extension Cables. It satisfies the American Petroleum Institute's (API) 670 Standard and is backward compatible and interchangeable with non-XL 3300 series 5 mm and 8 mm transducer loop hardware.
- Alternative Model (Unarmored Sibling):
330103-05-12-10-02-00 (3300 XL 8mm Metric Probe, Without Armor)
- Key Differences between 330104 (Armored) and 330103 (Unarmored):
Physical Cable Shrouding: The 330104 includes flexible AISI 302 or 304 stainless steel armor with an FEP outer jacket, whereas the 330103 consists of a raw 75Ω triaxial cable with a bare FEP insulation jacket.
Outside Cable Diameter: The armored portion of the 330104 cable has an outside diameter of 7.67 mm (0.302 inches), while the standard non-armored 330103 cable measures a narrower 3.68 mm (0.145 inches).
Armor Ferrule Profile: The 330104 assembly incorporates terminal stainless steel structural ferrules near its ends with a maximum diameter of 9.5 mm (0.38 inches), which requires a wider path through tight internal machine conduit lines compared to the unarmored 330103 model.
Ordering Information
|
Part/Option Identifier |
Selected Code |
Option Meaning & Technical Specification |
|
Product Model |
330104 |
3300 XL 8 mm Probe, M10 x 1 thread, with armor |
|
A: Unthreaded Length |
05 |
50 mm unthreaded length (Ordered in increments of 10 mm) |
|
B: Overall Case Length |
12 |
120 mm overall case length (Ordered in increments of 10 mm) |
|
C: Total Length Option |
10 |
1.0 meter (3.3 feet) total integrated probe length |
|
D: Connector/Cable Type |
02 |
Miniature coaxial ClickLoc connector, standard cable |
|
E: Agency Approval Option |
00 |
Not required |
FAQ
Q1: What does the 330104-05-12-10-02-00 measure?
A1: It measures both shaft vibration and position in rotating machinery.
Q2: Is the 330104-05-12-10-02-00 compliant with industry standards?
A2: Yes, it meets API 670 requirements for accuracy and performance.
Q3: Can the components be replaced individually?
A3: Yes, probes, cables, and sensors are fully interchangeable.
Q4: Does the 330104-05-12-10-02-00 require calibration before use?
A4: No, it does not require individual calibration of components.
Q5: Where is the 330104-05-12-10-02-00 typically used?
A5: It is commonly used in fluid-film bearing machines for monitoring and protection.
Accessories
| 141078 | 3300 XL 8 mm and 3300 5 mm Proximity Transducer System Manual. |
| 175751 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x12”x6”. Can hold up to 8 Proximitor Sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 176467 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x8”x6”. Can hold up to 4 3300XL Proximitor Sensors in both DIN-mount and panel-mount configurations. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 330181 | 3300 XL Multi-Purpose Stainless Steel Housing. 13”x9.5”x7”. Can hold up to 8 Proximitor sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. Primarily used by customers requiring hazardous area approvals fro their installations. Available with ATEX Zone 0 and Zone 1 and North American Division 1 and Division 2 certifications. |
| 02120015 | Bulk field wire. 1.0 mm2 (18 AWG), 3 conductor, twisted, shielded cable with drain wire. Specify length in feet. |
| 138492-01 | Replacement panel-mount mounting pad. |
| 138493-01 | Replacement DIN-mount mounting pad. |
| 148722-01 | 3300 XL test plug. The 3300 XL Test Plug contains 3 small test pins attached to 3 color-coded 1-meter wires, each terminated in a banana plug. The 3-pin adapter plugs into the test pin holes on 3300 XL-style Proximitor sensors. You can use this test plug to check the performance of the Proximitor sensor from the test pin holes in the terminal strip without removing the field wiring. |
| 04310310 | 3300 XL Proximitor Sensor panelmount screw. One 6-32 UNC thread forming mounting screw. Four screws are required for each Proximitor sensor. (Screws supplied standard with Proximitor housings [3300 XL panel-mount option]). |
| 03200006 | Silicone self-fusing tape. A 9.1- meter (10-yard) roll of silicone tape to protect connectors. This tape is easy to install and provides excellent electrical isolation and protection from the environment. We do not recommend using this tape inside the casing of the machine. |
| 40113-02 | Connector Protector Kit. Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. |
| 136536-01 | Connector protector adapter. This allows you to use connector protector installation tools manufactured prior to 1998 with 75Ω ClickLoc connectors. |
| 40180-02 | Connector protectors. Package contains 10 pairs of connector protectors for 3300 XL 8 mm probes and extension cables. |
| 03839410 | 75Ω triaxial male connector protector. Male connector protectors install onto the extension cable and attach to the female connector protector on the probe, providing environmental protection of connectors. |
| 03839420 | 75Ω triaxial female connector protector. Female connector protectors install onto the probe lead and attach to the male connector protector on the extension cable, providing environmental protection of connectors. You can also place the connector protector onto the extension cable to slide over the connection to the Proximitor sensor to protect that connection from the environment. |
| 04301007 | 3/8-24 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 04301008 | M10 x 1 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 330153-01 | 3300 XL connector kit. Used on 3300 XL 8 mm probes and extension cables. Contains 1 pair each of male and female ClickLoc connectors, 2 colorcoded sleeves, 2 pieces of slit FEP tubing, and 1 strip of silicone tape. |
| 330153-09 | 3300 XL ETR Connector Kit. Used on ETR 3300 XL 8mm probes and 3300 ETR XL extension cables. Contains one pair of male and female ClickLoc connectors, two color-coded sleeves, two pieces of high temperature slit FEP tubing, and one strip of silicon tape. |
| 163356 | Connector Crimp Tool Kit. Includes 1 set of multiconnector inserts and connector installation instructions. Compatible only with 330153 connector kits or with probes shipped in 2003 or later with ClickLoc connectors uninstalled. Supplied with carrying case. |
For the quick assistance message us on WhatsApp at 
