330707-00-10-10-02-00 Bently Nevada 3300 XL 11mm Proximity Probe 5/8-18 UNF Thread 1.0" Case 1.0m Cable

Bently Nevada 330707-00-10-10-02-00 3300 XL 11 mm probe

Inquiry now

330707-00-10-10-02-00 Product Overview

The 3300 XL 11 mm system is used when the measuring application needs more linear range than a standard 8 mm proximity system. This probe provides the sensing element and integral cable; it must be combined with the matching 11 mm extension cable and Proximitor Sensor to maintain the specified system response.

Important: Confirm thread, case length, probe lead length, target material, required linear range and the installed 11 mm Proximitor model.

Key Product Information

Product family	5/8-18 UNF thread without armor
Mechanical configuration	0.0 in unthreaded length and 1.0 in overall case length
Length / size	1.0 m total probe length
Connector / cable	Miniature coaxial ClickLoc connector with standard cable
Selection note	11 mm system family with 4 mm (160 mil) nominal linear range

Ordering Code Explained

The following breakdown is provided to help customers compare the exact label with the required configuration. The written quotation and label evidence take precedence.

Code	Meaning for this listing
330707	3300 XL 11 mm probe, 5/8-18 UNF thread, without armor
00	0.0 in unthreaded length
10	1.0 in overall case length
10	1.0 m total length
02	Miniature coaxial ClickLoc connector, standard cable
00	Agency approval not required

Functions and Typical Applications

The 3300 XL 11 mm family is commonly considered for:

Shaft vibration measurement requiring extended range
Axial position and displacement measurement
Steam turbine and large rotating-machine monitoring
Applications where an 8 mm system does not provide sufficient linear reach

Compatibility and Replacement Checks

Use only with the correct 3300 XL 11 mm extension cable and 11 mm Proximitor Sensor for the selected total system length. An 8 mm extension cable or Proximitor is not a substitute.

Before ordering: Confirm thread, case length, probe lead length, target material, required linear range and the installed 11 mm Proximitor model.

What to Include in Your RFQ

Manufacturer and complete part number, including every suffix
Clear photos of the product label, connector and cable condition when available
Installed probe, extension cable and Proximitor or monitoring-system numbers
Required quantity, acceptable product condition and destination country
Approval, certificate, firmware, revision or packaging requirements

Inspection, Warranty and Shipping

Stockoems is operated by Apter Power Limited as an independent reseller of industrial automation products. Before dispatch, available product and label information can be checked against the written order requirements. Learn about our Quality Control, Company Verification, Shipping Policy, Warranty Policy and Return Policy.

Technical reference: Stockoems Technical Resources — 3300 XL 11 mm documentation. Manufacturer documentation should be used together with the exact product label and application requirements.

Frequently Asked Questions

What is 330707-00-10-10-02-00?

330707-00-10-10-02-00 is a 5/8-18 UNF, unarmored 11 mm proximity probe with a 1.0 in case and 1.0 m total length.

How should the ordering code be checked?

Read every character from the product label and compare the base model, mechanical dimensions, lead or cable length, connector option and approval suffix with the quotation. The complete part number matters; similar-looking probes are not automatically interchangeable.

Which system components must match?

Use only with the correct 3300 XL 11 mm extension cable and 11 mm Proximitor Sensor for the selected total system length. An 8 mm extension cable or Proximitor is not a substitute.

What information is needed for a replacement inquiry?

Confirm thread, case length, probe lead length, target material, required linear range and the installed 11 mm Proximitor model.

Can Stockoems confirm condition and availability?

Yes. Stockoems can quote available condition options after checking the requested quantity and sourcing status. Condition, photographs, lead time and included accessories are confirmed in writing before an order is accepted.

Does the part include the full monitoring system?

Unless the quotation specifically lists additional components, the offer applies only to the part number shown. Proximitor Sensors, extension cables, housings, monitors, software and installation accessories are separate items.

Request a Written Quotation

Send the complete part number and system information so our team can verify availability, condition, lead time and shipping terms.

Contact Stockoems

Bently Nevada and related manufacturer names are used for product identification only. Stockoems / Apter Power Limited is an independent reseller and is not presented as the original manufacturer or an authorized distributor unless expressly stated in writing.

If you have other request contact our team to get customized service

One Year Warranty

We offer a one-year warranty for any quality issues with our products. If you encounter any defects or malfunctions during this period, please contact us for prompt resolution. Our warranty covers repairs or replacements, ensuring your satisfaction and peace of mind.
Shipping & Delivery

We have 10 years experience with leading logistics companies like FedEx, DHL, and SF, ensuring efficient and reliable shipping solutions. Our extensive experience in working with these carriers allows us to offer fast, secure delivery services, tailored to meet the diverse needs of our customers.
Payment Method

We accept a variety of payment methods, including T/T Bank Transfer, Alipay, and more, providing flexible options to suit our customers' preferences. This ensures a convenient and secure transaction process for all orders.

How Can I Get Your Support?

Call +86 18159889985 to be connected with our Manager Stella

Email to sales6@apterpower.com get your best quotation

For the quick assistance message us on WhatsApp at +86 18159889985 now!

You can also reach me via Skype: live:ariatang111 or WeChat: zxd18159889985!

Fast and Reliable Worldwide Shipping

We provide professional global shipping services to ensure your industrial automation parts and equipment arrive safely and on time. To meet different delivery requirements, we cooperate with internationally recognized logistics companies, including:FedEx/DHL/TNT/UPS/SF Express

Whether you require standard international shipping or urgent express delivery, we can arrange flexible logistics solutions tailored to your project schedule and destination.

Secure Payment Method

For convenient and secure transactions, we accept T/T (Telegraphic Transfer) payment.

After order confirmation, our sales team will provide complete payment details and invoice information to ensure a smooth and efficient payment process.