Siemens 6ES7135-6HD00-0BA1 is a SIMATIC ET 200SP Standard analog output module with four voltage or current outputs. Siemens identifies 16-bit conversion, +/-0.3% accuracy, module diagnostics, BaseUnit types A0 and A1, color code CC00, and a 24 V DC rated supply. It is intended for engineered analog-output tasks in ET 200SP stations and is relevant to control-loop expansion, panel maintenance, and installed-module replacement. Before ordering, verify the complete suffix, output mode, load requirements, BaseUnit, terminal wiring, hardware status, firmware version, engineering project, condition, and current label photographs.
Provides four configurable analog voltage or current outputs.
Supplies analog command values to compatible field circuits in an engineered ET 200SP station.
Supports module diagnostics for maintenance review.
Uses BaseUnit type A0 or A1 with module color code CC00.
Use the Siemens product documentation and the approved engineering project when installing, wiring, parameterizing, or replacing this exact article number.
Do not transfer terminal assignments, ranges, protocol settings, connector requirements, or revision assumptions from a visually similar module.
Voltage or current setpoints in a documented control design.
Replacement planning for an installed AQ 4xU/I Standard module.
Additional analog outputs where the ET 200SP configuration permits.
Output mode, load, wiring, and scaling checks before service.
Provide the ET 200SP station details, full product label, BaseUnit type, configured output modes and ranges, connected loads, terminal wiring, engineering version, quantity, and destination. Please contact us to confirm the exact revision, firmware version, condition and availability before ordering.
Is 6ES7135-6HD00-0BA1 currently available?
Availability is checked for the requested quantity, condition, and destination before a written quotation is issued.
What condition can 6ES7135-6HD00-0BA1 be supplied in?
Contact us to confirm the offered condition, packaging, label markings, revision evidence, and inspection details.
How should compatibility be confirmed?
Compare the complete suffix, BaseUnit, output mode, configured range, connected load, wiring, hardware status, firmware, and ET 200SP project entry.
Is the complete suffix important?
Yes. Match the full 6ES7135-6HD00-0BA1 identity with the original nameplate and engineering records.
Can product and label photos be provided?
Request current photos during quotation and compare the complete article number, connections, markings, and condition.
What shipping and warranty terms apply?
International shipping options and written warranty terms are confirmed after the destination, condition, and order requirements are reviewed.
Stockoems is operated by Apter Power Limited and is an independent reseller of industrial automation products. Manufacturer names and trademarks are used for identification purposes only.
The complete 6ES7135-6HD00-0BA1 identity is compared with the inquiry, engineering records, and supplied label photos.
The offered condition and packaging are stated in the written quotation before an order is placed.
Compare the complete suffix, BaseUnit, output mode, configured range, connected load, wiring, hardware status, firmware, and ET 200SP project entry.
Current photos may be requested so markings, connections, and condition can be compared.
Packaging requirements are selected to protect the module housing, BaseUnit contacts, terminal area, and labels in transit.
International delivery options are reviewed without promising an unconfirmed dispatch date.
Tracking information is provided when supported by the selected and confirmed shipping service.
Commercial shipping documents are prepared according to the confirmed order and destination.
Warranty scope and duration are not assumed; applicable terms are stated in the written quotation.
Contact the sales team before returning an item so eligibility, evidence, and authorization can be reviewed.
Provide the order details, full article number, issue description, project context, and clear photos for review.
Useful pages: Shipping and Delivery | Return Policy | Contact Us
Stockoems is operated by Apter Power Limited and is an independent reseller of industrial automation products. Manufacturer names and trademarks are used for identification purposes only.
Send the required model, quantity, destination, and label photos so our team can check product identity, availability, condition, and shipping options.
