Bently Nevada 330801-28-00-115-03-02 PROXPAC XL Assembly

330801-28-00-115-03-02 Legacy Metric PROXPAC XL proximity transducer assembly product and nameplate

Inquiry now

BENTLY NEVADA PART · OFFICIAL DOCUMENTATION REVIEWED

330801-28-00-115-03-02

Legacy Metric PROXPAC XL proximity transducer assembly

Buyer Summary

A self-contained Bently Nevada PROXPAC XL assembly identified by the legacy metric order code 330801-28-00-115-03-02. It combines a 3300 XL 8 mm probe and Proximitor sensor in a protective housing, eliminating the separate extension cable and Proximitor housing used by conventional systems.

Accuracy note: Values below are limited to the exact order-code information and system data supported by public Bently Nevada documentation. Nameplate, machine BOM and project drawings remain controlling for replacement selection.

330801-28-00-115-03-02 Ordering-Code Details

Field	Verified interpretation
Legacy order code	330801-28-00-115-03-02
Probe and approvals option	28 — 3300 XL 8 mm probe with multiple approvals
Standoff adapter	00 — no standoff adapter
Probe penetration	115 — 115 mm
Fittings option	03 — one M20 fitting and two plugs
Mounting thread	02 — 3/4-14 NPT

Official Technical Information

Parameter	Published value / selection note
System architecture	Integrated 3300 XL 8 mm probe and Proximitor sensor; no extension cable
Housing rating	Type 4X and IP66
Power requirement	-17.5 Vdc to -26 Vdc
Linear range	2 mm (80 mil) system range
Scale factor	7.87 V/mm (200 mV/mil) nominal
Frequency response	0 to 10 kHz, +0/-3 dB
Probe temperature	-52°C to +177°C
Housing / Proximitor operating temperature	-52°C to +100°C

Application and Compatibility

Use for non-contact shaft vibration and position measurements where a compact, externally adjustable and environmentally protected assembly is preferred. Confirm the legacy 330801 nameplate because current public ordering literature identifies the metric family as 330881.

Match the label
Confirm every character in 330801-28-00-115-03-02 and photograph the installed nameplate.

Match the system
Provide the machine model, monitor channel, existing sensor chain and project BOM.

Ordering 330801-28-00-115-03-02

For an accurate quotation, send the information below. Availability, condition, lead time and commercial terms are confirmed in the quotation and are not assumed from the product page.

RFQ item	What to provide
Exact identification	330801-28-00-115-03-02
Quantity and condition	Required units and requested condition
Installed evidence	Clear nameplate, connector, mounting and complete product photos
System details	Machine / monitor model, sensor-chain part numbers, BOM or drawing reference
Delivery	Destination country and required date

330801-28-00-115-03-02 FAQ

What is 330801-28-00-115-03-02?
A self-contained Bently Nevada PROXPAC XL assembly identified by the legacy metric order code 330801-28-00-115-03-02. It combines a 3300 XL 8 mm probe and Proximitor sensor in a protective housing, eliminating the separate extension cable and Proximitor housing used by conventional systems.

Can a similar part number be used instead?
Do not assume interchangeability. Match the full order string, mechanical configuration, system length or connector details, approvals and the machine BOM.

Why are some values described as system-level specifications?
Bently Nevada publishes many performance values for a complete matched transducer system. A probe, cable or Proximitor component alone does not guarantee those values when combined incorrectly.

What should be sent with an RFQ?
Send the exact code, quantity, destination, installed label photos, machine model and all connected sensor-chain part numbers.

Official Bently Nevada Reference

Bently Nevada PROXPAC XL Datasheet 178554

Request a Quote for 330801-28-00-115-03-02

Send the exact part number and installed label for a compatibility-focused quotation.

Email Inquiry WhatsApp Inquiry

Related resources: Browse Bently Nevada products | View related model

BENTLY NEVADA PROCUREMENT SUPPORT

Service for 330801-28-00-115-03-02

Our RFQ process focuses on exact identification and documented compatibility for Legacy Metric PROXPAC XL proximity transducer assembly.

1 · Part-number check
We record the complete 330801-28-00-115-03-02 order string and compare label evidence.

2 · Configuration review
System length, mounting, connector, approval and modification fields are reviewed where applicable.

3 · Official-data check
Public Bently Nevada datasheets are used for supported system and ordering information.

4 · Quotation and shipping
Condition, quantity, lead time, packing, destination and commercial terms are confirmed in writing.

Information Required

Exact part number and quantity
Clear photos of the existing nameplate, connector and mounting
Machine, monitor and sensor-system model numbers
BOM, drawing or maintenance-record reference
Destination and requested delivery date

Compatibility notice: Similar descriptions do not prove interchangeability. Installation and machine-protection work must follow applicable Bently Nevada manuals and site procedures.

Email: sales6@apterpower.com WhatsApp: +86 181 5988 9985

MODEL SELECTION GUIDANCE

Related Models for 330801-28-00-115-03-02

The models below are related by product family or ordering structure. They are not presented as automatic replacements.

Model / family	Selection difference
330801-28-00-050-03-02	Same legacy family with 50 mm penetration
330881 metric family	Current public PROXPAC XL metric ordering family; verify migration with Bently Nevada

Before Choosing an Alternative

Compare every character of the order code.
Match system length, probe/cable/sensor family and electrical configuration.
Confirm thread, case, penetration, connector, armor and mounting details.
Verify approval suffixes and custom MOD fields.
Use the machine BOM or Bently Nevada project documentation as the final reference.

Need a model check? Send both labels and the machine/system information to sales6@apterpower.com.

Tags :