Siemens 6GK5208-0HA00-2AS6 SCALANCE XP208 Managed Industrial Ethernet Switch

Siemens 6GK5208-0HA00-2AS6 IP65 industrial network switch with M12 ports

Inquiry now

SCALANCE XP-200 · M12 INDUSTRIAL NETWORKING

Siemens 6GK5208-0HA00-2AS6

SCALANCE XP208 Managed Industrial Ethernet Switch

Siemens 6GK5208-0HA00-2AS6 is the SCALANCE XP208 managed Industrial Ethernet switch with eight 10/100 Mbit/s M12 ports. Its IP65 design, LED diagnostics, error signaling contact and redundant power supply support industrial network installations. The official description also lists PROFINET IO device functionality, network management and operation in a redundant ring, with C-PLUG available as an option. This exact article must not be confused with a later port-speed configuration. Before replacement, verify M12 cabling, sealing, power connections and the installed network settings. Stockoems supports exact-model identification, condition review and worldwide shipment coordination.

Commercial Status

Original newIn stockWith 1 year warrantyOfficial Life Cycle: Active

Condition, availability and warranty are Stockoems commercial information, not promises made by Siemens. Worldwide shipping options are reviewed against the destination and order requirements.

Key Product Information

Manufacturer: Siemens

Complete Part Number: 6GK5208-0HA00-2AS6

Series: SCALANCE XP-200 managed

Product Type: SCALANCE XP208 managed IE switch

Ethernet Ports: 8 × M12

Port Speed: 10/100 Mbit/s

Degree of Protection: IP65

Diagnostics: LEDs and error signaling contact

Power Supply Arrangement: Redundant

Configuration Accessory: C-PLUG optional

Country of Origin: GERMANY

Official Life Cycle: Active

M12 Connections, Diagnostics and Redundancy

Review the network and installation conditions together for this IP65 switch.

Eight M12 ports · 10/100 Mbit/s
This article provides eight M12 Ethernet ports at 10/100 Mbit/s. Match cable assemblies and connector requirements to the existing installation.
IP65 design · installation integrity
The specified degree of protection depends on installation in accordance with Siemens instructions. Review the mating connectors and closure of unused connections before commissioning.
Managed operation · diagnostics and redundant ring
The switch supports network management, PROFINET IO device functionality and operation in a redundant ring. LED diagnostics and an error signaling contact support fault identification.

Application Planning

Typical project scenarios to assess with the responsible automation engineer include:

Industrial machine networks using M12 Ethernet cable assemblies.
Installations requiring the documented IP65 switch design and appropriate connector sealing.
Managed PROFINET networks using diagnostic and redundant-ring functions.
Like-for-like maintenance of an installed SCALANCE XP208 with this complete article number.

Compatibility and Revision Notice

Verify the exact article number, hardware revision, firmware, M12 cable assemblies, unused-port closures, redundant power wiring and network configuration. Review current Siemens security advisories and approved access controls before commissioning. The catalogue lists a successor, but port speeds and installation requirements must be compared; a later product must not be assumed to be an unchanged replacement.

Product Questions

01 / What is 6GK5208-0HA00-2AS6?

It is the Siemens SCALANCE XP208 managed Industrial Ethernet switch in the SCALANCE XP-200 family, with an IP65 design and M12 Ethernet connections.

02 / Does this exact version provide Gigabit Ethernet ports?

The official description specifies eight 10/100 Mbit/s M12 ports. Gigabit port specifications from a later version must not be applied to this article.

03 / Is a C-PLUG included as standard?

The Siemens description identifies C-PLUG as optional. Confirm the accessory scope for the actual offered unit rather than treating the switch article number as proof of inclusion.

04 / What should be reviewed for an IP65 installation?

Check the specified mating connectors, cable assemblies and closures, together with mounting and power wiring, against Siemens installation requirements. The enclosure designation alone does not validate an incorrectly assembled connection.

05 / Is 6GK5208-0HA00-2AS6 discontinued?

The Siemens catalogue lists PM300: Active Product and also gives a product phase-out date of 1 October 2026. A phase-out notice is not the same as an already discontinued product. Review the lifecycle again when placing an order.

06 / What condition and warranty does Stockoems offer?

Stockoems lists this product as Original new and In stock, with the commercial offer With 1 year warranty. Confirm the supplied unit, order scope and written warranty terms before purchase. These are Stockoems commercial terms, not a manufacturer warranty promise.

Request This Switch

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com
WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

STOCKOEMS PROCUREMENT SUPPORT

From Part Identification to After-Sales Care

For Siemens 6GK5208-0HA00-2AS6, purchasing review starts with the complete switch article number and continues through condition evidence, engineering checks, shipment preparation and written support terms.

Identify the Offered Unit

Technician checking an automation module label beside equipment shelves

Careful identification supports a clear and consistent purchasing record.

01 / Model and Condition Evidence

Model and suffix verification: compare the complete article number on the inquiry, quotation and product label.

Condition confirmation: review the offered condition and visible housing, connectors, seals and packaging. Disclose any inspection limitations.

Product and label photo confirmation: request clear photographs of the actual offered unit before order approval.

Review the Engineering Requirement

02 / Technical Compatibility Review

For this IP65 managed switch, record the installed hardware revision, firmware and network configuration. Review M12 cable assemblies, connector sealing, redundant power wiring and optional C-PLUG scope with the responsible engineer.

Visual inspection does not establish network performance or the integrity of an installed IP65 connection. Any testing scope must be agreed and documented. Stockoems coordinates product information; site engineering retains responsibility for installation validation and commissioning.

Two team members checking an industrial component together in the warehouse

Technical and purchasing teams benefit from reviewing the same product evidence.

Prepare, Dispatch and Support

Protective Packaging
Plan protective wrapping, connector protection, cushioning and a suitable outer carton. Use anti-static handling and packaging where the component requires it. Check the packed item against the agreed order scope.
Worldwide Shipping and Shipment Tracking
Coordinate available transport options with the destination country and shipment requirements. Share tracking information after dispatch. Transit schedules are confirmed for the order rather than promised as a universal delivery time.
Customs Documentation
Prepare the commercial invoice, packing details and available supporting documents as agreed. Align consignee information and customs requirements before shipment; destination clearance remains subject to the applicable process.
Written Warranty Terms and Return Authorization Process
The Stockoems commercial offer is With 1 year warranty. Review written coverage, exclusions, claim evidence and return conditions before purchase. A return requires authorization before shipment back to the seller.
After-Sales Response
Send the order details, label photographs and issue description so the team can review the case and coordinate follow-up. No repair outcome, response deadline or replacement availability is assumed without confirmation.

A Coordinated Purchasing Process

Stockoems brings part identification, condition evidence, packing requirements, logistics coordination and after-sales communication into one order discussion. Keeping these checks aligned helps direct users, purchasing teams and engineers evaluate the same offer. Product condition, stock availability and warranty remain Stockoems commercial information, separate from Siemens technical specifications.

Industrial Supplier Screening FAQ

How can a direct user identify a qualified industrial automation supplier?

Ask for the full part number, legible label photographs, disclosed condition and written warranty terms for the actual unit. Compare these with the installed equipment record. A supplier should identify the scope of its checks and disclose any missing evidence.

What should procurement teams verify before payment?

Check the legal seller identity, quotation consistency, actual product photographs, order scope, packaging responsibilities, shipping terms and return authorization procedure. Be cautious about changing bank details, unexplained substitutions or pressure to pay before the offered unit is identified.

What evidence should an engineer request for this switch?

Request hardware and firmware identifiers, clear port and label photographs, connector and accessory scope, and the documented basis for network compatibility review. Installation sealing, configuration approval and commissioning remain the responsibility of the qualified site engineering team.

Which warning signs deserve further investigation?

Unreadable or inconsistent labels, recycled catalogue photographs presented as actual stock, unsupported manufacturer authorization claims, guaranteed compatibility without project details and refusal to provide written warranty or return terms are warning signs.

How are after-sales questions handled?

Provide the order number, complete part number, label photographs and a clear description of the issue. Stockoems reviews the supplied information and coordinates the next steps. Obtain return authorization before sending a unit back; the agreed written terms govern warranty handling.

Discuss Your Order Requirements

Send the complete part number, quantity, destination and available label photographs. Include the installed revision and any site-specific compatibility requirements.

Email: sales6@apterpower.com
WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

Stockoems Advantage Model Selection

BS610P-U61-4	SDL200	MB3270I-T	GE IC693MDL940F	LNL-8000-MCOM
330101-00-16-10-02-05	ALL-PI2011BP-60W	6EP8090-0CA00	1SAZ911201R1001	RSS-24MCW-FR
ABB 1.1400.0.10 1SKD 340000 R1400	ABB 2CDG110137R0011	97038401 KIT 1771-P4R	35075	MT 701
LNL-2220	GH-1KD	ABB Bio0007 2RCA026772A0001D / 2RCA026773D	Pilz 751107	CTTS-801
PS-2121	05400-7004-0001	B4S-E	SCP100S24X-CM	ABB UMC100.3 AC24L 1SAJ530000R2100
176F9170	ABB 83342-500	R-7540	CRD7X00-101RES	333D
751104	7700FR-C	2109-002-000-02	109838000	PRFB-A
CIML4-TYPE2	5802	GWC521TE	9018-50	ZW100-B
PIC120.242C	57D-15-126AA	GV-U6E	IC220SDL963-BA	aci1230
69-2160-04 A0 700-26425-05	3500 140471-01	RMG12.2-NN/280940	Eti 7250	180LR 4811504
3.3564.381 367016/1 2000W50 GO3 A00	EC3-X33	T-525W	DNC3205-64RP20B	R0011/2CDG110081R0011
8003/20-3-1	ABB TA25DU 1SAZ211201R1025	FET-40G 10-2920-02	B501-IV	MR7412.4613-U3-N034-G01
SB-9in1T-CL	PRO22IC	KL4502X1-DA1	DCL-PRO-SAWU-4-40-PE 87658184	PCO3000BS0
ABB 1SAP112100R0270 TB521-ETH	DSC 301 HD 60-1253-01	APS-AEC21-PSU1	38-115UM/1.5-4.5MILS	PVE400E-8G