SIMATIC NET · OSM TP62
Previous-generation Industrial Ethernet optical switch module with digital inputs for established network installations.
OFFICIAL LIFECYCLE
Not stated in reviewed official documents
Previous-generation OSM/ESM product range
Siemens 6GK1105-2AB10 identifies the SIMATIC NET Industrial Ethernet OSM TP62 with digital inputs. The official OSM/ESM operating instructions confirm the exact order number and document the supplied mounting kit, plug-in terminal block for supply voltage and signaling contact, additional plug-in terminal blocks for models with digital inputs, documentation CD and product information. Siemens replacement guidance describes OSM/ESM as a previous-generation switch range that may require migration to SCALANCE X rather than direct substitution. Procurement should verify the full suffix, installed optical and electrical connections, digital input wiring, mounting, supply, network redundancy and configuration records before replacement or migration.
| Product Condition | Original new |
|---|---|
| Availability | In stock |
| Official Lifecycle | Not stated in reviewed official documents |
| Warranty | With 1 year warranty |
| Shipping | Worldwide shipping options available |
Condition, availability and warranty are Stockoems commercial information, not manufacturer commitments.
| Manufacturer | Siemens |
|---|---|
| Complete Part Number | 6GK1105-2AB10 |
| Product Type | Industrial Ethernet optical switch module |
| Product Designation | OSM TP62 |
| Series | SIMATIC NET OSM/ESM |
| Digital Inputs | Included |
| Mounting Accessories | Mounting kit for 19-inch cabinet or wall mounting |
| Supply Connection | 6-pole plug-in terminal block |
| Signaling Contact | Combined with the supply terminal block |
| Digital Input Terminals | One to two 6-pole plug-in terminal blocks |
| Documentation | Documentation supplied on CD |
| Product Information | Included in the documented scope of supply |
| Replacement Context | Previous-generation OSM/ESM switch range |
| Industrial Ethernet Segments | Used in established SIMATIC NET OSM/ESM Industrial Ethernet installations. |
|---|---|
| Digital Signal Integration | The exact model is documented with digital inputs and associated terminal blocks. |
| Maintenance Replacement | Replacement requires matching the installed optical and electrical network arrangement. |
| Migration Planning | Siemens guidance points from older OSM/ESM products toward SCALANCE X solutions after engineering review. |
| 01 · Complete Identity | Match every character in 6GK1105-2AB10 with the installed module and product label. |
|---|---|
| 02 · Optical Media | Verify optical cable type, connectors, link arrangement and installed network distances. |
| 03 · Electrical Interfaces | Check copper Ethernet ports, digital input terminals and signaling contact wiring. |
| 04 · Power and Mounting | Confirm supply voltage, grounding, 19-inch or wall mounting hardware and cabinet space. |
| 05 · Network Topology | Review ring or redundant topology, link settings and existing configuration records. |
| 06 · Inspection Evidence | Request readable label, port, terminal, accessory and packaging photos. |
Siemens confirms the exact article number in the official OSM/ESM operating instructions. Official replacement guidance identifies OSM/ESM as a previous-generation switch range, but a current product-specific lifecycle code was not present in the reviewed documents; no exact status is inferred.
It identifies the SIMATIC NET Industrial Ethernet OSM TP62 with digital inputs.
The official instructions list mounting hardware, supply and signaling terminals, digital-input terminals, documentation and product information.
Not automatically; Siemens migration guidance requires review of interfaces, topology and application requirements.
A current product-specific lifecycle code was not present in the reviewed official documents, so no exact status is inferred.
Verify the suffix, optical and electrical media, digital inputs, supply, mounting, topology and product label.
Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
STOCKOEMS INDUSTRIAL NETWORK PROCUREMENT SUPPORT
Model verification, topology-aware compatibility review, interface evidence, protective handling and international shipment coordination.
Complete suffix, lifecycle wording, firmware and requested network configuration are reviewed before order handling.
Label, hardware revision, configuration evidence, interfaces and visible condition are aligned with the request.
Enclosure, terminals and communication interfaces are protected before documented shipment coordination.
| 01 | Model and suffix verification | The complete order code is checked character by character against available labels and documentation. |
|---|---|---|
| 02 | Condition confirmation | Visible condition, enclosure, interfaces, terminals and supplied accessories are reviewed. |
| 03 | Technical compatibility review | Firmware, hardware revision, interfaces, topology and application requirements are compared. |
| 04 | Product and label photo confirmation | Readable front, rear, nameplate, connector and packaging photos can be requested before approval. |
| 05 | Protective packaging | The enclosure, terminals and communication interfaces are protected for handling and transport. |
| 06 | Worldwide shipping | Available routes are coordinated without promising an unconfirmed delivery date. |
| 07 | Shipment tracking | Tracking information is shared after carrier acceptance. |
| 08 | Customs documentation | Commercial shipment documents are prepared for the confirmed order and destination. |
| 09 | Written warranty terms | Warranty scope is recorded in Stockoems commercial documents. |
| 10 | Return authorization process | Returns require written authorization and review of the agreed terms. |
| 11 | After-sales response | Post-shipment questions are handled with order, label, configuration and installation evidence. |
Check whether the supplier verifies the complete suffix, provides readable label and condition photos, records warranty terms, discusses compatibility limits and supplies traceable shipment documents.
Risks include blurred or missing labels, substituted suffixes, unsupported technical claims, unclear return terms, refusal to provide inspection evidence and payment requests that do not match the supplier identity.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
| AMG 2151 | 64-825-0045-4 | AN100 | 4744R | 4743 |
| 1-XR4-433C | T6831A | SM322 32DO 6AG1322-1BL00-2AA0 | ABB MT701.2 | S7-300 SM321 6AG1321-1BL00-2AA0 |
| VFI2 | DT100FM151 | 0635.1044/404B | ZHCL-3-24/48V | 140DDO35300 |
| 1900071071 | B501 | ME96SSE-MB | FA-2016E1 | CL06A300M1 |
| RM35TF30 | 51305437-100 | AN-3100D | M-ME-C205.40 | 8003/20-3-1 |
| M-ME-C202.32 | M-ME-M204.32 | M-AF-M210.04 | 7P016XL | MS-FEC2611-0 |
| PAD-4-MB | M-ME-D204-12 | IN1606 | 330180-91-05 | FSDDR0322 F400 |
| SDU101 F004 | ABB TB820V2 3BSE013208R1 | IQE31-1201U50034 | DG-11 DGC11-3PK-6500T | DES-12-G DES-12 G 3PK-6500T |
| BMS-2N-24D D2003ACWR-DBY | AT-HDTX-IR | XPSAF5130 | ABB 6125/01-83-500 | tya604d |
| Xenta 412 | EX310 | S701 | EL3164 | OGP502 |
| QAX34.1 | NS-ATA7003-0 | DVP04PT-H2 | PRFB-A | TR2D09310 |
| TR2D32355 | 505C633G01 A200 | PT-SFP-GE-L | TD3RCBO | E6173A |
| E1411B | JDB1610 | ZZ-135-U02 | QSA224DC SCA068 | MTL4546Y |
| XCKM121 | 1F83-71 2 | BB-2000L | SC-MD04250 | URX-P2 |
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
