SCALANCE SECURITY · SC642-2C
Stateful firewall, IPsec and OpenVPN protection with secure routing for industrial communication networks.
OFFICIAL LIFECYCLE
Not stated in reviewed official documents
No lifecycle conclusion inferred
Siemens 6GK5642-2GS00-2AC2 is the SCALANCE SC642-2C industrial security appliance for protecting devices and communication networks in industrial environments. Official Siemens documentation identifies stateful inspection firewall functions, IPsec and OpenVPN, NAT/NAPT, IEEE 802.1x support, two RJ45 ports and two SFP transceiver slots used as combo ports. It supports up to 200 VPN connections and multiple encryption and authentication methods. Procurement should verify the complete suffix, firmware version, port media, power arrangement, certificates, network design and required security policy. A current official lifecycle code was not present in the reviewed documents, so none is inferred.
| Product Condition | Original new |
|---|---|
| Availability | In stock |
| Official Lifecycle | Not stated in reviewed official documents |
| Warranty | With 1 year warranty |
| Shipping | Worldwide shipping options available |
Condition, availability and warranty are Stockoems commercial information, not manufacturer commitments.
| Manufacturer | Siemens |
|---|---|
| Complete Part Number | 6GK5642-2GS00-2AC2 |
| Product Type | Industrial security appliance |
| Product Designation | SCALANCE SC642-2C |
| Electrical Ports | 2 RJ45 ports |
| Combo Interfaces | 2 SFP transceiver slots used as combo ports |
| Firewall | Stateful inspection |
| VPN Protocols | IPsec and OpenVPN |
| Encryption | AES-256, AES-192, AES-128, 3DES-168 and DES-56 |
| Authentication | Preshared key and X.509v3 certificates |
| Maximum VPN Connections | 200 |
| Network Functions | NAT/NAPT and IEEE 802.1x RADIUS |
| Redundancy | Standby redundancy, STP and RSTP |
| Industrial Network Segmentation | Separates automation cells and protected network zones through documented security rules. |
|---|---|
| Secure Remote Connectivity | Supports IPsec and OpenVPN connections where the approved network design requires them. |
| Firewall and Routing | Applies stateful inspection, NAT/NAPT and routing functions in industrial communication paths. |
| Security Maintenance | Replacement requires review of firmware, configuration backup, certificates, addressing and connected media. |
| 01 · Complete Identity | Match every character in 6GK5642-2GS00-2AC2 with the installed device and product label. |
|---|---|
| 02 · Firmware and Backup | Record firmware version and export the available security and network configuration before replacement. |
| 03 · Port Media | Verify RJ45 wiring, installed SFP modules, optical media and connector types. |
| 04 · Security Policy | Review firewall rules, NAT/NAPT mappings, VPN peers, certificates and authentication settings. |
| 05 · Power and Installation | Check supply arrangement, grounding, mounting position and environmental approvals. |
| 06 · Inspection Evidence | Request readable label, port, terminal, enclosure and packaging photos. |
The complete article number is confirmed in current Siemens official technical and security documentation. A current lifecycle code was not present in the reviewed official documents, so this page does not infer Active, Classic or discontinued status.
It identifies the Siemens SCALANCE SC642-2C industrial security appliance.
Siemens documents stateful inspection, IPsec, OpenVPN, NAT/NAPT and IEEE 802.1x RADIUS support.
The official data sheet states up to 200 possible VPN connections.
A current official lifecycle code was not present in the reviewed Siemens documents, so no status is inferred.
Verify the suffix, firmware, configuration backup, certificates, firewall rules, port media, power and product label.
Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
STOCKOEMS INDUSTRIAL NETWORK PROCUREMENT SUPPORT
Model verification, firmware-aware compatibility review, security configuration evidence, protective handling and international shipment coordination.
Complete suffix, lifecycle wording, firmware and requested network configuration are reviewed before order handling.
Label, hardware revision, configuration evidence, interfaces and visible condition are aligned with the request.
Enclosure, terminals and communication interfaces are protected before documented shipment coordination.
| 01 | Model and suffix verification | The complete order code is checked character by character against available labels and documentation. |
|---|---|---|
| 02 | Condition confirmation | Visible condition, enclosure, interfaces, terminals and supplied accessories are reviewed. |
| 03 | Technical compatibility review | Firmware, hardware revision, interfaces, topology and application requirements are compared. |
| 04 | Product and label photo confirmation | Readable front, rear, nameplate, connector and packaging photos can be requested before approval. |
| 05 | Protective packaging | The enclosure, terminals and communication interfaces are protected for handling and transport. |
| 06 | Worldwide shipping | Available routes are coordinated without promising an unconfirmed delivery date. |
| 07 | Shipment tracking | Tracking information is shared after carrier acceptance. |
| 08 | Customs documentation | Commercial shipment documents are prepared for the confirmed order and destination. |
| 09 | Written warranty terms | Warranty scope is recorded in Stockoems commercial documents. |
| 10 | Return authorization process | Returns require written authorization and review of the agreed terms. |
| 11 | After-sales response | Post-shipment questions are handled with order, label, configuration and installation evidence. |
Check whether the supplier verifies the complete suffix, provides readable label and condition photos, records warranty terms, discusses compatibility limits and supplies traceable shipment documents.
Risks include blurred or missing labels, substituted suffixes, unsupported technical claims, unclear return terms, refusal to provide inspection evidence and payment requests that do not match the supplier identity.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
| AMG 2151 | 64-825-0045-4 | AN100 | 4744R | 4743 |
| 1-XR4-433C | T6831A | SM322 32DO 6AG1322-1BL00-2AA0 | ABB MT701.2 | S7-300 SM321 6AG1321-1BL00-2AA0 |
| VFI2 | DT100FM151 | 0635.1044/404B | ZHCL-3-24/48V | 140DDO35300 |
| 1900071071 | B501 | ME96SSE-MB | FA-2016E1 | CL06A300M1 |
| RM35TF30 | 51305437-100 | AN-3100D | M-ME-C205.40 | 8003/20-3-1 |
| M-ME-C202.32 | M-ME-M204.32 | M-AF-M210.04 | 7P016XL | MS-FEC2611-0 |
| PAD-4-MB | M-ME-D204-12 | IN1606 | 330180-91-05 | FSDDR0322 F400 |
| SDU101 F004 | ABB TB820V2 3BSE013208R1 | IQE31-1201U50034 | DG-11 DGC11-3PK-6500T | DES-12-G DES-12 G 3PK-6500T |
| BMS-2N-24D D2003ACWR-DBY | AT-HDTX-IR | XPSAF5130 | ABB 6125/01-83-500 | tya604d |
| Xenta 412 | EX310 | S701 | EL3164 | OGP502 |
| QAX34.1 | NS-ATA7003-0 | DVP04PT-H2 | PRFB-A | TR2D09310 |
| TR2D32355 | 505C633G01 A200 | PT-SFP-GE-L | TD3RCBO | E6173A |
| E1411B | JDB1610 | ZZ-135-U02 | QSA224DC SCA068 | MTL4546Y |
| XCKM121 | 1F83-71 2 | BB-2000L | SC-MD04250 | URX-P2 |
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
