Bently Nevada 991-06-70-02-05 is a two-wire, loop-powered thrust transmitter that converts a matching 3300 NSv probe and extension-cable signal into a 4-20 mA output proportional to axial shaft position. Option 06 specifies a 0.6-0-0.6 mm full-scale range, 70 specifies a 7.0-meter system, 02 specifies bulkhead-screw mounting, and 05 selects the listed multi-agency approval package. It is intended for machinery control integration on compact rotating equipment. Before ordering, confirm the NSv sensor chain, loop supply, mounting, alarm logic, approval labels and engineering units.
| Manufacturer | Bently Nevada |
| Complete Part Number | 991-06-70-02-05 |
| Product Type | 991 Thrust Transmitter |
| Series | 991 Thrust Transmitter |
| Model Configuration | 0.6-0-0.6 mm full scale; 7.0 m system; bulkhead screws; multi-agency approval option 05 |
| Product Condition | Contact us to confirm. |
| Hardware Revision | Contact us to confirm. |
| Firmware/Software Version | Contact us to confirm. |
| Country of Origin | Contact us to confirm. |
| Compatibility | Requires a matching 3300 NSv probe and extension cable configured for a 7 m system. Confirm the control-system input and loop design. |
| Certification | Option 05 lists CSA Division 2, ATEX Zone 0, ATEX Zone 2 and ABS maritime approval; verify actual markings. |
| Warranty | Contact us to confirm. |
| Availability | Contact us to confirm. |
| Shipping | Worldwide shipping options are confirmed in the written quotation. |
| 991 | Two-wire loop-powered thrust transmitter |
| 06 | 0.6-0-0.6 mm full-scale range |
| 70 | 7.0 m (23.0 ft) system length |
| 02 | Bulkhead-screw mounting |
| 05 | CSA Division 2, ATEX Zone 0/2 and ABS approval option |
System-level values apply only when required components and installation conditions match the manufacturer documentation.
| Sensor input | Matching 3300 NSv proximity probe and extension cable |
| Supply | +12 to +35 Vdc at transmitter terminals |
| Signal output | 4 to 20 mAdc over the specified full-scale range |
| Loop configuration | Two wire |
| Typical accuracy | Within +/-1.5% over full scale under the published test condition |
| Maximum loop resistance | 1,000 ohms including cable at 35 Vdc |
| Current limiting | 23 mA typical |
| Diagnostics | PROX OUT, COM and coaxial dynamic/gap output |
Verify the full-scale range, 7-meter NSv probe and extension-cable system, bulkhead mounting, +12 to +35 Vdc supply, receiving input resistance and alarm logic. Confirm transmitter and probe labels, approval markings, wiring and installation zone. Machinery alarming and shutdown logic occur in the receiving control system.
Please contact us to confirm the exact revision, firmware version, condition and availability before ordering.
Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.
A documented procurement path for compatibility, packaging, shipment and after-sales communication.
The complete 991-06-70-02-05 identity is compared with the request and available labels.
Condition and packaging details are confirmed in writing before order acceptance.
Supplied system, interface, dimensions and revision details are reviewed without presenting the product as an automatic substitute.
Available product, connector and label photos can be checked before shipment when requested.
Packaging is selected to protect the product, connectors and exposed surfaces during transport.
International options are quoted after destination and export requirements are known.
Tracking details are provided after carrier collection when supported by the service.
Commercial shipping documents follow the confirmed transaction and destination requirements.
Any warranty scope and duration are stated in the written quotation.
Returns require prior authorization under the written transaction terms.
Post-delivery questions use the order record, product labels and reported symptoms.
Share the complete model, quantity, destination and label photos for documented checks.
Each entry is an independent product listing and is not presented as a direct replacement. Confirm the manufacturer, complete part number, revision and compatibility before ordering.
Send the complete model, quantity, destination and label photos for availability and compatibility review.
