330106-05-30-05-02-05 is a Bently Nevada eddy current application module featuring a reverse-mount case structure, a 30mm overall case length, and a compact 0.5-meter cable. Fully compatible with M10x1 metric mounting threads, this unit works seamlessly with 3300 XL Proximitor sensors to deliver flexible machinery diagnostics, full hazardous location approvals, and stable industrial vibration monitoring.
Applications
Vibration monitoring of fluid-film bearing machines to detect imbalance and mechanical faults.
Position measurement for shafts and components to ensure proper alignment and operation.
Keyphasor (phase reference) signals used in vibration analysis and machinery diagnostics.
Speed and tachometer measurements, including zero-speed detection during startup and shutdown.
Competitive Advantage
Interchangeable System Design: Part of the Bently Nevada 330106-05-30-05-02-05, it supports full interchangeability of probe, cable, and sensor, eliminating individual calibration and simplifying maintenance.
High Measurement Accuracy: Provides precise static (position) and dynamic (vibration) measurements with reliable performance compliant with API 670 standards.
Robust Connectivity: Features gold-plated ClickLoc connectors and secure locking mechanisms, ensuring stable connections without special tools or loosening risks.
Enhanced Durability & Flexibility: TipLoc and CableLoc designs improve mechanical strength, while compatibility with FluidLoc and ETR options supports harsh environments and temperature variations.
Ordering Information
|
Option Code |
Parameter Block Description |
Configured Value Specification |
|
330106 |
Probe Model Base |
3300 XL 8 mm Reverse Mount Probe, M10 x 1 threads |
|
-05 |
Unthreaded Length Option |
5.0 mm (0.20 inches) standard unthreaded length profile |
|
-30 |
Overall Case Length Option |
30 mm (1.2 inches) standard case housing length profile |
|
-05 |
Total Length Option |
0.5 meter (1.6 feet) integrated FEP insulated coaxial lead |
|
-02 |
Connector Option |
Miniature ClickLoc coaxial connector, standard non-armored cable |
|
-05 |
Agency Approval Option |
CSA, ATEX, IECEx Approvals for certified hazardous locations |
Installation & Troubleshooting FAQ
Q1: What is the correct initial gap voltage and mechanical method for setting up this reverse mount probe?
A: Because this is a reverse-mount module, it installs from the rear of a mounting sleeve rather than screwing into a casing from the front. Connect a digital multimeter to your Proximitor sensor output and carefully rotate the probe into its mounting thread position until the meter reads -9 VDC for radial tracking (or -10.0 VDC for full-scale midpoint alignment), which aligns the probe at approximately 1.27 mm (50 mils) from the target surface.
Q2: Why am I unable to order this reverse mount module with stainless steel armor or a factory connector protector?
A: Due to mechanical clearance restrictions, reverse mount probes are structurally unavailable with factory armor braids or pre-installed connector protectors because those options would prevent the cable assembly from sliding cleanly through the internal diameter of standard matching protective probe sleeves. To protect the gold-plated ClickLoc junction from environmental fluids, you must manually apply self-fusing silicone rubber tape around the connector during field installation.
Q3: What happens to system measurement accuracy if I mix this 3300 XL reverse probe with older non-XL components?
A: While each 3300 XL component is physically and electrically interchangeable with legacy non-XL 3300 series 5mm and 8mm components, mixing them changes the circuit properties. Combining components from different series limits your overall loop performance to the looser, baseline specifications of the traditional non-XL 3300 Transducer System, dropping your incremental scale factor (ISF) tolerance profile from ±5% down to a wider margin.
Accessories
| 141078 | 3300 XL 8 mm and 3300 5 mm Proximity Transducer System Manual. |
| 175751 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x12”x6”. Can hold up to 8 Proximitor Sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 176467 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x8”x6”. Can hold up to 4 3300XL Proximitor Sensors in both DIN-mount and panel-mount configurations. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 330181 | 3300 XL Multi-Purpose Stainless Steel Housing. 13”x9.5”x7”. Can hold up to 8 Proximitor sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. Primarily used by customers requiring hazardous area approvals fro their installations. Available with ATEX Zone 0 and Zone 1 and North American Division 1 and Division 2 certifications. |
| 02120015 | Bulk field wire. 1.0 mm2 (18 AWG), 3 conductor, twisted, shielded cable with drain wire. Specify length in feet. |
| 138492-01 | Replacement panel-mount mounting pad. |
| 138493-01 | Replacement DIN-mount mounting pad. |
| 148722-01 | 3300 XL test plug. The 3300 XL Test Plug contains 3 small test pins attached to 3 color-coded 1-meter wires, each terminated in a banana plug. The 3-pin adapter plugs into the test pin holes on 3300 XL-style Proximitor sensors. You can use this test plug to check the performance of the Proximitor sensor from the test pin holes in the terminal strip without removing the field wiring. |
| 04310310 | 3300 XL Proximitor Sensor panelmount screw. One 6-32 UNC thread forming mounting screw. Four screws are required for each Proximitor sensor. (Screws supplied standard with Proximitor housings [3300 XL panel-mount option]). |
| 03200006 | Silicone self-fusing tape. A 9.1- meter (10-yard) roll of silicone tape to protect connectors. This tape is easy to install and provides excellent electrical isolation and protection from the environment. We do not recommend using this tape inside the casing of the machine. |
| 40113-02 | Connector Protector Kit. Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. |
| 136536-01 | Connector protector adapter. This allows you to use connector protector installation tools manufactured prior to 1998 with 75Ω ClickLoc connectors. |
| 40180-02 | Connector protectors. Package contains 10 pairs of connector protectors for 3300 XL 8 mm probes and extension cables. |
| 03839410 | 75Ω triaxial male connector protector. Male connector protectors install onto the extension cable and attach to the female connector protector on the probe, providing environmental protection of connectors. |
| 03839420 | 75Ω triaxial female connector protector. Female connector protectors install onto the probe lead and attach to the male connector protector on the extension cable, providing environmental protection of connectors. You can also place the connector protector onto the extension cable to slide over the connection to the Proximitor sensor to protect that connection from the environment. |
| 04301007 | 3/8-24 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 04301008 | M10 x 1 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 330153-01 | 3300 XL connector kit. Used on 3300 XL 8 mm probes and extension cables. Contains 1 pair each of male and female ClickLoc connectors, 2 colorcoded sleeves, 2 pieces of slit FEP tubing, and 1 strip of silicone tape. |
| 330153-09 | 3300 XL ETR Connector Kit. Used on ETR 3300 XL 8mm probes and 3300 ETR XL extension cables. Contains one pair of male and female ClickLoc connectors, two color-coded sleeves, two pieces of high temperature slit FEP tubing, and one strip of silicon tape. |
| 163356 | Connector Crimp Tool Kit. Includes 1 set of multiconnector inserts and connector installation instructions. Compatible only with 330153 connector kits or with probes shipped in 2003 or later with ClickLoc connectors uninstalled. Supplied with carrying case. |
For the quick assistance message us on WhatsApp at 
