3300 XL 50 MM PROXIMITY PROBE
Extended-range displacement sensing with a 1/2-20 case and 9.0-metre high-temperature FluidLoc cable.
IDENTITY SNAPSHOT
Series: 3300 XL 50 mm
Length: 9.0 m
Cable: FluidLoc
The Bently Nevada 330876-01-90-00-05 is a straight-exit 3300 XL 50 mm proximity probe for extended-range displacement measurements, including turbine differential expansion applications. Its order code specifies a 1/2-20 threaded case, 9.0-metre total length, high-temperature FluidLoc cable without armor, and multiple agency approvals. The probe is one component of a matched 3300 XL 50 mm transducer system and must be paired with the correct 9.0-metre Proximitor Sensor; extension-cable selection depends on the probe length. The system is designed for aggressive steam environments. Replacement review should confirm case style, system length, cable and armor code, approvals, mounting arrangement and Proximitor before purchase.
Condition: Original new
Availability: In stock
Lifecycle: Not stated in the current official datasheet
Warranty: With 1 year warranty
Shipping: Worldwide options available
Condition, availability and warranty are Stockoems commercial information, not manufacturer commitments.
| Manufacturer | Bently Nevada |
|---|---|
| Complete Part Number | 330876-01-90-00-05 |
| Series | 3300 XL 50 mm Proximity Transducer System |
| Product Type | Straight-exit 50 mm proximity probe |
| Case Option 01 | 1/2-20 thread |
| Total Length Option 90 | 9.0 m |
| Cable Option 00 | High-temperature FluidLoc cable, no armor |
| Approval Option 05 | Multiple approvals |
| System Maximum Linear Range | 27.9 mm (1100 mils) |
| Approximate Linear Range | 1.3 to 29.2 mm |
| Average Scale Factor | 394 mV/mm (10 mV/mil) |
| 9 m Probe DC Resistance | 8.9 +/- 1.1 ohm |
| Probe Temperature | -35 to +200 C |
| Short-Term Temperature | Up to +250 C for less than 24 hours |
| Minimum Target Diameter | 102 mm |
| Matching Interface | 9.0 m 3300 XL 50 mm Proximitor Sensor |
| Country of Origin | USA |
Pair the probe with the matching 9.0-metre Proximitor Sensor and the correct extension-cable arrangement.
Supports extended-range rotor or turbine differential-expansion measurement in an engineered installation.
FluidLoc cable construction is intended to resist leakage through the probe cable in demanding steam service.
Match case style, system length, cable code, approvals, mounting and Proximitor before replacement.
| 01 · Identity | Match every character in 330876-01-90-00-05 against the probe label and documentation. |
|---|---|
| 02 · Mechanical Fit | Confirm the straight-exit 1/2-20 case, target geometry, mounting bracket and available clearance. |
| 03 · System Length | Verify the 9.0-metre probe and Proximitor Sensor combination and any extension-cable requirement. |
| 04 · Cable | Confirm high-temperature FluidLoc construction, no armor and connector condition. |
| 05 · Application | Review range, target diameter, rotor geometry, temperature and differential-expansion configuration. |
| 06 · Evidence | Review probe, cable, connector, approvals, label and packaging photos before approval. |
The current Bently Nevada datasheet confirms the complete 330876-01-90-00-05 ordering configuration but does not state an official lifecycle classification. No Active, Classic, obsolete or discontinued conclusion is applied.
A straight-exit 3300 XL 50 mm probe with 1/2-20 thread, 9.0-metre FluidLoc cable, no armor and approval option 05.
Confirm the matching 9.0-metre 3300 XL 50 mm Proximitor Sensor for the installed system.
The official datasheet states a 27.9 mm (1100 mil) maximum linear range for the complete system.
The current official datasheet does not state a lifecycle classification.
Probe, FluidLoc cable, connector, label, approval and packaging photos can be requested before approval.
Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
STOCKOEMS SENSOR PROCUREMENT ROUTE
A documented service path for vibration sensors, industrial automation spares and international order coordination.
Visible condition, labels, connector details and supplied items are reviewed before release.
Engineering and procurement teams coordinate compatibility and documentation checks.
Packaging, shipment records and after-sales evidence are prepared as one route.
The complete part number and every suffix character are compared with the request and label evidence.
Visible condition, seals, housing, connector and supplied items are reviewed.
Supply, signal, interface, mounting, hardware and project requirements are checked with the buyer.
Readable product, nameplate, connector and packaging images support final identity checks.
Packaging is selected for sensor protection, connector security and international transport.
Available transport options are coordinated for destination and product requirements.
Tracking details are provided when available from the selected logistics route.
Commercial and shipping documents are prepared for the agreed destination.
Applicable Stockoems warranty scope and conditions are documented with the order.
Return requests follow a documented authorization and evidence review procedure.
Order records support efficient communication about delivery, condition and technical questions.
Look for exact suffix verification, readable label evidence, clear condition language, traceable communication, written warranty terms and a defined return authorization process.
Common risks include incomplete part numbers, reused or unclear photos, unsupported compatibility claims, unexplained substitutions and unconfirmed delivery promises.
Request label and connector photos, revision information when relevant, packaging evidence and written confirmation of the ordered suffix.
Send the complete part number, required quantity, destination country and available label photos for service coordination.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
| AMG 2151 | 64-825-0045-4 | AN100 | 4744R | 4743 |
| 1-XR4-433C | T6831A | SM322 32DO 6AG1322-1BL00-2AA0 | ABB MT701.2 | S7-300 SM321 6AG1321-1BL00-2AA0 |
| VFI2 | DT100FM151 | 0635.1044/404B | ZHCL-3-24/48V | 140DDO35300 |
| 1900071071 | B501 | ME96SSE-MB | FA-2016E1 | CL06A300M1 |
| RM35TF30 | 51305437-100 | AN-3100D | M-ME-C205.40 | 8003/20-3-1 |
| M-ME-C202.32 | M-ME-M204.32 | M-AF-M210.04 | 7P016XL | MS-FEC2611-0 |
| PAD-4-MB | M-ME-D204-12 | IN1606 | 330180-91-05 | FSDDR0322 F400 |
| SDU101 F004 | ABB TB820V2 3BSE013208R1 | IQE31-1201U50034 | DG-11 DGC11-3PK-6500T | DES-12-G DES-12 G 3PK-6500T |
| BMS-2N-24D D2003ACWR-DBY | AT-HDTX-IR | XPSAF5130 | ABB 6125/01-83-500 | tya604d |
| Xenta 412 | EX310 | S701 | EL3164 | OGP502 |
| QAX34.1 | NS-ATA7003-0 | DVP04PT-H2 | PRFB-A | TR2D09310 |
| TR2D32355 | 505C633G01 A200 | PT-SFP-GE-L | TD3RCBO | E6173A |
| E1411B | JDB1610 | ZZ-135-U02 | QSA224DC SCA068 | MTL4546Y |
| XCKM121 | 1F83-71 2 | BB-2000L | SC-MD04250 | URX-P2 |
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
