3300 MODIFIED CERAMIC CAPPED PROBE
A custom 146054-family probe requiring exact label, modification and manufacturer-document verification.
IDENTITY SNAPSHOT
Confirmed Base: 146054
Thread: 3/8-24 UNF
Confirmation: Base family only
The requested 146054-058-20-02-05 MOD:173931-011-058 identification references the Bently Nevada 146054 ceramic-capped proximity-probe family. The current public manufacturer datasheet confirms the 146054 base as a 3/8-24 UNF, unarmored ceramic-capped probe for front-end exposure to corrosive media, but it does not publish this complete suffix and modification combination. Therefore, no custom case dimension, cable construction, approval execution or lifecycle classification is asserted here. Procurement must compare the complete label, modification marking, supplied documentation and installed transducer chain before approval. The rear of the standard 146054 construction is not sealed and must be protected from destructive environments.
Condition: Original new
Availability: In stock
Lifecycle: Not stated in the current official datasheet
Warranty: With 1 year warranty
Shipping: Worldwide options available
Condition, availability and warranty are Stockoems commercial information, not manufacturer commitments.
| Manufacturer | Bently Nevada |
|---|---|
| Requested Complete Identifier | 146054-058-20-02-05 MOD:173931-011-058 |
| Publicly Confirmed Base | 146054 |
| Series | 3300 Ceramic Capped Probe |
| Product Type | Modified ceramic capped proximity probe |
| Base Thread | 3/8-24 UNF |
| Base Armor | Without armor |
| Probe Tip | Alumina ceramic |
| Probe Case | AISI 304 stainless steel |
| Front Seal | Hermetic ceramic-to-metal interface |
| Rear Protection | Not sealed on the standard 146054 base |
| Official Confirmation Level | Base family only; complete MOD configuration is not published |
| Country of Origin | USA |
The public datasheet confirms the 146054 ceramic-capped probe construction and standard base characteristics.
Use the product label and manufacturer documentation to establish the exact modified execution.
The standard ceramic front supports corrosive exposure; the rear of the base construction is not sealed.
Do not approve interchangeability until the complete MOD identifier and installed transducer chain are matched.
| 01 · Full Identifier | Match the complete suffix and MOD:173931-011-058 marking character by character. |
|---|---|
| 02 · Manufacturer Records | Request documentation that connects the MOD marking to the supplied physical configuration. |
| 03 · Mechanical Fit | Verify actual case length, thread, installation clearance and mounting arrangement from evidence. |
| 04 · Electrical Chain | Confirm cable, connector, extension cable, Proximitor Sensor and system length from records. |
| 05 · Environment | Review front exposure, rear protection, temperature, pressure and area classification. |
| 06 · Evidence | Require readable label, full probe, connector, cable and packaging photos before approval. |
The public Bently Nevada datasheet confirms the 146054 base family but does not list the complete 146054-058-20-02-05 MOD:173931-011-058 configuration or an official lifecycle classification. No status conclusion is applied.
The public official datasheet confirms the 146054 base family, but not this complete suffix and MOD combination.
The 146054 base is a 3/8-24 UNF, unarmored ceramic-capped probe with an AISI 304 case.
No. Custom dimensions and cable execution require the label and manufacturer documentation for this MOD item.
No official lifecycle classification for this complete MOD identifier is published in the available datasheet.
Request the complete probe, full label, MOD marking, connector, cable and packaging documentation.
Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
STOCKOEMS SENSOR PROCUREMENT ROUTE
A documented service path for vibration sensors, industrial automation spares and international order coordination.
Visible condition, labels, connector details and supplied items are reviewed before release.
Engineering and procurement teams coordinate compatibility and documentation checks.
Packaging, shipment records and after-sales evidence are prepared as one route.
The complete part number and every suffix character are compared with the request and label evidence.
Visible condition, seals, housing, connector and supplied items are reviewed.
Supply, signal, interface, mounting, hardware and project requirements are checked with the buyer.
Readable product, nameplate, connector and packaging images support final identity checks.
Packaging is selected for sensor protection, connector security and international transport.
Available transport options are coordinated for destination and product requirements.
Tracking details are provided when available from the selected logistics route.
Commercial and shipping documents are prepared for the agreed destination.
Applicable Stockoems warranty scope and conditions are documented with the order.
Return requests follow a documented authorization and evidence review procedure.
Order records support efficient communication about delivery, condition and technical questions.
Look for exact suffix verification, readable label evidence, clear condition language, traceable communication, written warranty terms and a defined return authorization process.
Common risks include incomplete part numbers, reused or unclear photos, unsupported compatibility claims, unexplained substitutions and unconfirmed delivery promises.
Request label and connector photos, revision information when relevant, packaging evidence and written confirmation of the ordered suffix.
Send the complete part number, required quantity, destination country and available label photos for service coordination.
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
| AMG 2151 | 64-825-0045-4 | AN100 | 4744R | 4743 |
| 1-XR4-433C | T6831A | SM322 32DO 6AG1322-1BL00-2AA0 | ABB MT701.2 | S7-300 SM321 6AG1321-1BL00-2AA0 |
| VFI2 | DT100FM151 | 0635.1044/404B | ZHCL-3-24/48V | 140DDO35300 |
| 1900071071 | B501 | ME96SSE-MB | FA-2016E1 | CL06A300M1 |
| RM35TF30 | 51305437-100 | AN-3100D | M-ME-C205.40 | 8003/20-3-1 |
| M-ME-C202.32 | M-ME-M204.32 | M-AF-M210.04 | 7P016XL | MS-FEC2611-0 |
| PAD-4-MB | M-ME-D204-12 | IN1606 | 330180-91-05 | FSDDR0322 F400 |
| SDU101 F004 | ABB TB820V2 3BSE013208R1 | IQE31-1201U50034 | DG-11 DGC11-3PK-6500T | DES-12-G DES-12 G 3PK-6500T |
| BMS-2N-24D D2003ACWR-DBY | AT-HDTX-IR | XPSAF5130 | ABB 6125/01-83-500 | tya604d |
| Xenta 412 | EX310 | S701 | EL3164 | OGP502 |
| QAX34.1 | NS-ATA7003-0 | DVP04PT-H2 | PRFB-A | TR2D09310 |
| TR2D32355 | 505C633G01 A200 | PT-SFP-GE-L | TD3RCBO | E6173A |
| E1411B | JDB1610 | ZZ-135-U02 | QSA224DC SCA068 | MTL4546Y |
| XCKM121 | 1F83-71 2 | BB-2000L | SC-MD04250 | URX-P2 |
Email: sales6@apterpower.com | WhatsApp: +86 18159889985
