Features and benefits
- High measurement accuracy: The Bently Nevada 330173-00-04-20-02-05 Proximity Transducer provides precise vibration and position monitoring with stable output proportional to shaft displacement.
- Modular interchangeable design: Probe, extension cable, and Proximitor sensor are fully interchangeable, eliminating bench calibration and simplifying maintenance.
- Rugged industrial performance: Features TipLoc bonded probe construction and wide temperature stability for reliable operation in harsh machinery environments.
- Easy installation system: ClickLoc gold-plated connectors ensure fast, tool-free installation with secure locking and long-term connection stability.
Specifications
- Minimum unthreaded length:0.0mm
- Minimum unthreaded length:20mm
- Total Length Option:2.0 metres (6.6 feet)
- Connector Option:Miniature coaxial ClickLoc connector, standard cable
- Agency Approval Option:Multiple Approvals
Ordering Information Table
|
Designator |
Option Code |
Description |
|
Base Model |
330173 |
3300 5mm Proximity Probe, M8 x 1 thread, without armor |
|
A: Unthreaded Length |
00 |
0 mm unthreaded section (fully threaded case) |
|
B: Case Length |
02 |
20 mm overall metric case length |
|
C: Total Length |
20 |
2.0 meters (6.6 feet) integrated cable length |
|
D: Connector Type |
02 |
Miniature coaxial ClickLoc connector, standard cable |
|
E: Agency Approval |
05 |
Multiple Approvals (North America and ATEX/IECEx hazardous areas) |
Installation & Troubleshooting FAQ
Q1: What is the correct linear range and calibration gap voltage for this 5mm probe?
A: The standard target voltage for setting the initial midpoint gap is typically -10.0 VDC. Always refer to your matching 3300 XL Proximitor documentation to verify physical scale factors.
Q2: Why are there cyclic signal fluctuations or beating waves in adjacent X-Y setups?
A: This points to cross-talk between probe fields. Ensure adjacent 5mm sensors maintain a proper center-to-center physical distance to prevent high-frequency RF signal overlap.
Q3: What should be checked if the Proximitor system alerts a "Not OK" signal fault?
A: Inspect the golden ClickLoc junction between the leading probe cable and extension cable. Conductive fluids like water or oil mist can short out the connection if unsealed.
Accessories
| 02120015 |
Bulk field wire 1.0mm2 (18 AWG), 3-conductor, twisted, shielded cable for connections between Proximitor Sensor and monitor. |
| 03200006 |
Silicone self-fusing tape 9.1-metre (10-yard) roll of silicone tape to protect connectors. It is easy to install and provides excellent electrical isolation and protection from the environment. It is not recommended for use inside the casing of the machine. |
| 40113-03 |
Connector Protector Kit Connector Protector Kit for 3300 5mm probes, including connector protectors and installation tools. |
| 136536-01 |
Connector Protector Adapter Makes connector protector kits purchased prior to 1998 compatible with ClickLoc extension cable connectors. |
| 40180-03 |
Connector Protectors Package containing 10 pairs of 75Ω Coaxial Connector Protectors. |
| 03839410 |
75Ω Triaxial/95 ohm Coaxial Male Connector Protector Placed onto the extension cable; attaches to the female connector protector on the 5 mm probe to provide environmental protection of connectors. |
| 03800001 |
75Ω Coaxial Female Connector Protector Placed onto 3300 5mm probe leads; attaches to the male connector protector on the extension cable to provide environmental protection of connectors. |
| 163356 |
Connector Crimp Tool Kit Includes 1 set of multi-connector inserts and connector installation instructions. Compatible only with 330153 connector kits or with probes shipped in 2003 or later with ClickLoc connectors uninstalled. Supplied with carrying case. |
For the quick assistance message us on WhatsApp at 
