The 330104-01-14-10-01-00 is a Bently Nevada 3300 XL 8mm proximity probe featuring a rugged stainless steel armored sleeve and an integrated connector protector. Fully compatible with 3300 XL Proximitor Sensors, this unit works seamlessly with heavy-duty machinery casings to deliver high-precision non-contact vibration logging and stable long-term machinery protection.
Application
• Turbine Monitoring: Provides precise vibration and position measurements for steam and gas turbines.
• Compressor Protection: Monitors shaft vibration and axial position in centrifugal and axial compressors.
• Rotating Equipment: Ideal for pumps, fans, and gearboxes requiring reliable proximity sensing.
• Dynamic Environments: Delivers accurate readings in challenging industrial conditions with temperature extremes.
• Predictive Maintenance: Enables condition-based monitoring to detect early signs of machinery faults.
• Hazardous Areas: Suitable for critical applications where non-contact measurement ensures operational safety.
Specific Application
- Radial vibration and axial position measurement on heavy-duty industrial machinery such as large steam turbines and multi-stage boiler feed pumps.
Deep-hole or thick-walled bearing housing installations requiring robust mechanical armor protection against harsh external abrasion. - Asset condition monitoring in high-density process environments where environmental shielding and mechanical survivability are vital.
Ordering Information Table
|
Designator |
Option Code |
Description |
|
Base Model |
330104 |
3300 XL 8 mm Proximity Probe, M10 x 1 thread, with armor |
|
A: Unthreaded Length |
01 |
10 mm unthreaded length option |
|
B: Overall Case Length |
14 |
140 mm overall case length option |
|
C: Total Length |
10 |
1.0 meter (3.3 feet) total length option |
|
D: Connector/Cable Type |
01 |
Miniature coaxial ClickLoc connector with connector protector, standard cable |
|
E: Agency Approval |
00 |
No hazardous area safety approvals required |
FAQ
Q1: What is the Bently Nevada 330104-01-14-10-01-00?
A1: It is a 3300 XL 8 mm proximity probe with M10 x 1 armored thread for precision vibration monitoring.
Q2: What are the key dimensions of this probe?
A2: It features 10 mm unthreaded length, 140 mm case length, and 5.0 meter (16.4 feet) total cable.
Q3: What connector type does this probe use?
A3: It uses a miniature coaxial ClickLoc connector with connector protector and standard cable.
Q4: What is the weight of this probe?
A4: The probe weighs approximately 0.323 kg.
Q5: What are the primary applications for this probe?
A5: It is ideal for turbine monitoring, compressors, and rotating equipment in dynamic industrial environments.
Accessories
| 141078 | 3300 XL 8 mm and 3300 5 mm Proximity Transducer System Manual. |
| 175751 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x12”x6”. Can hold up to 8 Proximitor Sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 176467 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x8”x6”. Can hold up to 4 3300XL Proximitor Sensors in both DIN-mount and panel-mount configurations. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 330181 | 3300 XL Multi-Purpose Stainless Steel Housing. 13”x9.5”x7”. Can hold up to 8 Proximitor sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. Primarily used by customers requiring hazardous area approvals fro their installations. Available with ATEX Zone 0 and Zone 1 and North American Division 1 and Division 2 certifications. |
| 02120015 | Bulk field wire. 1.0 mm2 (18 AWG), 3 conductor, twisted, shielded cable with drain wire. Specify length in feet. |
| 138492-01 | Replacement panel-mount mounting pad. |
| 138493-01 | Replacement DIN-mount mounting pad. |
| 148722-01 | 3300 XL test plug. The 3300 XL Test Plug contains 3 small test pins attached to 3 color-coded 1-meter wires, each terminated in a banana plug. The 3-pin adapter plugs into the test pin holes on 3300 XL-style Proximitor sensors. You can use this test plug to check the performance of the Proximitor sensor from the test pin holes in the terminal strip without removing the field wiring. |
| 04310310 | 3300 XL Proximitor Sensor panelmount screw. One 6-32 UNC thread forming mounting screw. Four screws are required for each Proximitor sensor. (Screws supplied standard with Proximitor housings [3300 XL panel-mount option]). |
| 03200006 | Silicone self-fusing tape. A 9.1- meter (10-yard) roll of silicone tape to protect connectors. This tape is easy to install and provides excellent electrical isolation and protection from the environment. We do not recommend using this tape inside the casing of the machine. |
| 40113-02 | Connector Protector Kit. Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. |
| 136536-01 | Connector protector adapter. This allows you to use connector protector installation tools manufactured prior to 1998 with 75Ω ClickLoc connectors. |
| 40180-02 | Connector protectors. Package contains 10 pairs of connector protectors for 3300 XL 8 mm probes and extension cables. |
| 03839410 | 75Ω triaxial male connector protector. Male connector protectors install onto the extension cable and attach to the female connector protector on the probe, providing environmental protection of connectors. |
| 03839420 | 75Ω triaxial female connector protector. Female connector protectors install onto the probe lead and attach to the male connector protector on the extension cable, providing environmental protection of connectors. You can also place the connector protector onto the extension cable to slide over the connection to the Proximitor sensor to protect that connection from the environment. |
| 04301007 | 3/8-24 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 04301008 | M10 x 1 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 330153-01 | 3300 XL connector kit. Used on 3300 XL 8 mm probes and extension cables. Contains 1 pair each of male and female ClickLoc connectors, 2 colorcoded sleeves, 2 pieces of slit FEP tubing, and 1 strip of silicone tape. |
| 330153-09 | 3300 XL ETR Connector Kit. Used on ETR 3300 XL 8mm probes and 3300 ETR XL extension cables. Contains one pair of male and female ClickLoc connectors, two color-coded sleeves, two pieces of high temperature slit FEP tubing, and one strip of silicon tape. |
| 163356 | Connector Crimp Tool Kit. Includes 1 set of multiconnector inserts and connector installation instructions. Compatible only with 330153 connector kits or with probes shipped in 2003 or later with ClickLoc connectors uninstalled. Supplied with carrying case. |
For the quick assistance message us on WhatsApp at 
