6GT2810-3HC80 is a rugged SIMATIC RF620T passive UHF transponder for industrial identification and logistics tracking.
Siemens 6GT2810-3HC80 is the SIMATIC RF620T passive UHF RFID transponder for rugged industrial identification tasks. It stores EPC and user data and operates according to EPCglobal Class 1 Gen 2 / ISO 18000-63.
The transponder is designed for attachment to non-metallic surfaces such as plastic, wood and glass. For metal mounting, Siemens specifies spacer 6GT2898-2AA00 and at least 12 mm distance from metal; reader, antenna, orientation and environmental conditions must be verified.
| Manufacturer | Siemens |
|---|---|
| Complete Part Number | 6GT2810-3HC80 |
| Product Family | SIMATIC RF600 |
| Product Designation | SIMATIC RF620T |
| Product Type | Passive UHF RFID transponder |
| Lifecycle Status | No current official lifecycle category verified for 6GT2810-3HC80 |
| Operating frequency (ETSI) | 865 to 868 MHz |
|---|---|
| Operating frequency (FCC) | 902 to 928 MHz |
| Protocol | EPCglobal Class 1 Gen 2 / ISO 18000-63 |
| Chip / memory type | NXP UCode 7xm-2k / EEPROM |
| EPC ID memory | 56 bytes / 448 bits |
| User memory | 256 bytes / 2048 bits |
| TID memory | 12 bytes / 96 bits |
| Maximum read range | Up to 5.0 m, installation dependent |
| Maximum write range | Up to 2.5 m, installation dependent |
| Transmission speed | Up to 320 kbps |
| Protection rating | IP67 |
| Read/write temperature | -25 to +85 °C |
| Dimensions (L × W × H) | 127 × 38 × 6 mm |
| Weight | 18 g |
| Mounting | 2 × M4 screws, maximum 1 Nm |
Stores identification data on containers, pallets and reusable logistics assets.
Supports automated UHF tracking through conveyor, handling and dispatch processes.
Provides a rugged passive data carrier for non-metallic mounting surfaces and controlled metal-spacer installations.
Siemens compact operating instructions dated 06/2023 confirm the exact 6GT2810-3HC80 product and technical data. A current official lifecycle category was not verified, so no Active, Product Cancellation, Obsolete or Discontinued status is inferred.
It is the Siemens SIMATIC RF620T passive UHF RFID transponder for rugged industrial identification.
It operates with EPCglobal Class 1 Gen 2 / ISO 18000-63.
The official manual specifies 256 bytes / 2048 bits of user memory.
No. Siemens specifies a metal spacer and at least 12 mm distance for metal mounting.
Confirm frequency region, reader and antenna compatibility, mounting surface, spacer need, range and environmental conditions.
Contact Stockoems for availability verification, compatibility review, warranty terms and worldwide delivery coordination.
Structured support for identifying, checking and coordinating 6GT2810-3HC80 for an industrial automation requirement.
Our team reviews the complete article number, nameplate photographs and associated system information before sourcing coordination.
Visible terminals, connectors, housing, mounting points and identification labels can be checked against supplied evidence.
Protective packing, shipment documents and worldwide delivery options are coordinated for industrial spares.
Confirm the complete 6GT2810-3HC80 marking and SIMATIC RF620T designation.
Review frequency region, reader and antenna selection, polarization, mounting surface and target range.
Provide installation photographs, reader/antenna models, surface material and environmental requirements.
| Review Point | Recommended Evidence | Procurement Purpose |
|---|---|---|
| Identity | Full nameplate and complete suffix | Confirm the exact requested article |
| System fit | Installed system, associated modules and wiring | Review configuration before replacement |
| Condition | Front, terminal and mounting photographs | Support visible-condition inspection |
| Delivery | Destination, urgency and packing requirements | Coordinate freight and protective packing |
Share product photographs and installed-system details for availability verification, compatibility review, warranty information and worldwide delivery coordination.
Email: sales6@apterpower.com | WhatsApp: +86 181 5988 9985
Send the complete manufacturer and part number for availability verification, compatibility checks, warranty terms and worldwide delivery coordination.
Email: sales6@apterpower.com | WhatsApp: +86 181 5988 9985
