6EP1332-5BA10 supplies regulated 24 V DC at 4 A from wide-range single-phase AC or DC input.
Siemens 6EP1332-5BA10 is a SITOP PSU100C stabilized power supply for industrial control cabinets. It converts a single-phase AC or DC input into an isolated, regulated 24 V DC output rated at 4 A.
The compact DIN-rail unit provides an adjustable 22.2 to 26.4 V output, electronic short-circuit protection and natural-convection operation. Input range, load current, ambient temperature and required clearances should be checked before procurement.
| Manufacturer | Siemens |
|---|---|
| Complete Part Number | 6EP1332-5BA10 |
| Product Family | SITOP PSU100C |
| Product Type | Stabilized DIN-rail power supply |
| Rated Output | 24 V DC / 4 A |
| Product Lifecycle | PM300: Active Product |
| Input type | 1-phase AC or DC |
|---|---|
| Rated AC input | 100 to 230 V AC |
| Permissible AC input range | 85 to 264 V AC |
| DC input | 110 to 300 V DC |
| Line frequency | 47 to 63 Hz |
| Rated output voltage | 24 V DC |
| Adjustable output range | 22.2 to 26.4 V DC |
| Rated output current | 4 A |
| Typical efficiency | 88% |
| Mains buffering | At least 20 ms at 230 V input |
| Protection class | IP20 |
| Operating temperature | -20 to +70 °C with output-current derating above +55 °C |
| Dimensions (W × H × D) | 52.5 × 80 × 100 mm |
| Net weight | 0.32 kg |
Provides stabilized 24 V DC for PLCs, sensors, relays and auxiliary control circuits.
Fits narrow DIN-rail spaces where a regulated 4 A supply is required.
Supports replacement planning when input range, output load, clearances and terminal design are verified.
Siemens Industry Mall lists 6EP1332-5BA10 as PM300: Active Product. Procurement should still verify current regional availability, delivery information and the exact cabinet electrical requirements.
It is a Siemens SITOP PSU100C stabilized power supply with a 24 V DC, 4 A rated output.
Siemens specifies single-phase AC and DC input operation, including 110 to 300 V DC.
Yes. The official data sheet specifies an adjustable range of 22.2 to 26.4 V DC.
Yes. Siemens lists the exact article number as PM300: Active Product.
Confirm input voltage, total load current, temperature derating, DIN-rail space, clearances and terminal requirements.
Contact Stockoems for availability verification, compatibility review, warranty terms and worldwide delivery coordination.
Structured support for identifying, checking and coordinating 6EP1332-5BA10 for an industrial automation requirement.
Our team reviews the complete article number, nameplate photographs and associated system information before sourcing coordination.
Visible terminals, connectors, housing, mounting points and identification labels can be checked against supplied evidence.
Protective packing, shipment documents and worldwide delivery options are coordinated for industrial spares.
Confirm the complete 6EP1332-5BA10 nameplate, SITOP PSU100C family and 24 V DC / 4 A rating.
Review input voltage, load calculation, protective device, cabinet temperature and DIN-rail clearances.
Provide cabinet photographs, load details, supply voltage and required terminal or shipping condition.
| Review Point | Recommended Evidence | Procurement Purpose |
|---|---|---|
| Identity | Full nameplate and complete suffix | Confirm the exact requested article |
| System fit | Installed system, associated modules and wiring | Review configuration before replacement |
| Condition | Front, terminal and mounting photographs | Support visible-condition inspection |
| Delivery | Destination, urgency and packing requirements | Coordinate freight and protective packing |
Share product photographs and installed-system details for availability verification, compatibility review, warranty information and worldwide delivery coordination.
Email: sales6@apterpower.com | WhatsApp: +86 181 5988 9985
Send the complete manufacturer and part number for availability verification, compatibility checks, warranty terms and worldwide delivery coordination.
Email: sales6@apterpower.com | WhatsApp: +86 181 5988 9985
