Siemens 6GT2001-0CA10 MOBY I SLG 43 Read/Write Device

Siemens 6GT2001-0CA10 IP65 high-power RFID read/write unit for MOBY I media

Inquiry now

Siemens 6GT2001-0CA10 MOBY I SLG 43 Read/Write Device

MOBY I SLG 43 industrial identification read/write device with an inductive MDS interface and RS422 ASM connection.

Product Overview

Siemens 6GT2001-0CA10 is the MOBY I SLG 43 read/write device for industrial identification tasks. The official MOBY I documentation describes a high-performance unit intended especially for larger mobile data storage devices, with inductive energy and data transfer between the SLG and MDS. It communicates with the ASM through an RS422 serial interface and uses a 24 V DC supply. Procurement should match the complete order code, MDS type, required working distance, connector, cable length, mounting clearance and environmental conditions to the installed identification station before replacement.

Commercial Status

Commercial Item	Status
Product Condition	Original new
Availability	In stock
Warranty	With 1 year warranty
Shipping	Worldwide shipping options available

Condition, availability and warranty are Stockoems commercial information, not manufacturer commitments.

Verified Technical Data

Field	Verified Information
Manufacturer	Siemens
Complete Part Number	6GT2001-0CA10
Product Type	MOBY I SLG 43 read/write device
MDS Interface	Inductive
Energy Frequency	134 kHz
Data Frequency	1.81 MHz
MDS Transfer Rate	19,200 baud
ASM Interface	RS422 serial interface
SLG Connector	6-pin connector to DIN 43651
Nominal Supply	24 V DC
Supply Range	21 to 30 V DC
Current Consumption	60 mA idle; 250 mA active
Working Range	0 to 100 mm, dependent on MDS
Maximum Limit Distance	150 mm, dependent on MDS
Maximum ASM-SLG Cable Length	85 m at 24 V DC
Degree of Protection	IP65
Operating Temperature	-25 to +70 degrees C
Dimensions	238 x 40 x 80 mm
Net Weight	Approximately 800 g
Country of Origin	Germany

System Fit and Applications

Application Area	Procurement Guidance
MOBY I identification system	Reads and writes compatible MOBY I mobile data storage devices; verify the exact MDS type and working range.
ASM connection	Uses the documented RS422 serial interface; verify the 6-pin connector and cable route.
Industrial material tracking	Supports identification points where product carriers or workpieces use compatible MOBY I media.
Maintenance replacement	Match order code, mounting position, clearances and existing ASM wiring before exchange.

Compatibility and Procurement Checks

Before purchasing or replacing this exact item, review the configuration evidence that affects installation and system operation:

Complete part number 6GT2001-0CA10 and readable Siemens nameplate
MOBY I MDS type and required operating distance
RS422 ASM interface and 6-pin SLG connector
24 V DC supply range and available current
ASM-to-SLG cable length and routing
Mounting clearance, minimum spacing and metal-free installation area
IP65 enclosure requirement and operating temperature
Product, connector, nameplate and packaging photographs

Lifecycle Note

A current official Siemens lifecycle designation for the exact order code 6GT2001-0CA10 was not available in the retrieved manufacturer documentation. No lifecycle status is asserted here. Procurement should identify the exact order code and compare the installed hardware, MDS, ASM interface, connector and project requirements before purchase.

Frequently Asked Questions

What does 6GT2001-0CA10 identify?

It identifies the Siemens MOBY I SLG 43 industrial read/write device.

Which interfaces are used?

The device communicates inductively with the MDS and uses an RS422 serial interface to the ASM.

What supply should be checked?

The official documentation specifies a nominal 24 V DC supply with a 21 to 30 V DC operating range.

What affects the read/write distance?

The MDS type, installation environment, orientation and metal clearances affect the documented working and limit distances.

What should be reviewed before replacement?

Confirm the complete order code, MDS, ASM interface, connector, cable length, mounting and environmental conditions.

Can inspection photographs be provided?

Available product, connector, nameplate and packaging photographs can be coordinated before shipment.

Request Availability and Compatibility Review

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

Industrial Automation Procurement Service

Structured verification, inspection, documentation and delivery support for 6GT2001-0CA10.

Service Workflow

Our workflow begins with complete model and suffix verification against the purchase request and available product label. We review condition, interface details and technical compatibility points before commercial confirmation. Where inspection evidence is available, the team checks product views, nameplates, connector areas, packaging and visible accessories. Technical documentation is compared with the requested system position so that the MOBY I MDS, RS422 ASM connection, connector, cable length, supply and mounting conditions are clearly recorded without promising automatic interchangeability.

Service Stage	What Stockoems Checks
1. Identification	Complete order code, suffix, product label and visible revision details are compared.
2. Condition confirmation	Condition, included items, seals and visible handling marks are reviewed from available evidence.
3. Technical review	The MOBY I MDS type, RS422 ASM interface, connector, cable length, 24 V DC supply and installation clearances are compared.
4. Photo confirmation	Product, nameplate, connector and packaging photographs can be coordinated before shipment.
5. Protective packaging	Antistatic and impact-protective materials are selected for the module or unit.
6. Logistics support	Worldwide shipping, shipment tracking and customs-document preparation are coordinated.
7. Commercial records	Written warranty terms and the return authorization process are documented before order completion.
8. After-sales response	Questions about received condition, documentation and installation evidence are handled through a traceable service channel.

Inspection and Documentation Support

Our team coordinates label review, technical-document comparison, packaging preparation, logistics records and after-sales communication. We do not promise unverified quantities or fixed delivery dates. Commercial timing is confirmed only after the exact product, required quantity, destination and inspection scope have been reviewed.

Automation procurement team reviewing technical documentation

Office specialists coordinating industrial product inspection

Stockoems staff preparing procurement and shipping records

Supplier Qualification FAQ

How can an end user identify a qualified industrial automation source?

Look for complete legal and commercial details, model-specific technical communication, inspection evidence, written warranty terms, a defined return authorization process and traceable after-sales contacts.

Which documents, labels and commercial terms should procurement verify?

Review the quotation, complete order code, nameplate photos, condition statement, included accessories, warranty scope, shipping terms, customs documents and return conditions before approval.

How should engineers confirm model, firmware, interfaces and compatibility?

Compare 6GT2001-0CA10, visible revision or firmware details, undefined, installation position and the current project documentation. Compatibility should be reviewed for the exact installed configuration.

What are common risk signals when selecting a source?

Incomplete order codes, refusal to provide readable nameplate images, conflicting parameters, unclear condition descriptions, unsupported compatibility claims and inability to explain warranty or return authorization are important warning signs.

Request Procurement and Service Support

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

Stockoems Advantage Model Selection

D000NH1DLF0	GX-7	HDCJP0AES	60-258-22	7030.2
XPSAT5110	GFW-VBC	LTMR27MFM	ILR3	ABB TA25DU 1SAZ211201R1025
MN14005-AKOG	S2BN1D-19030	Z016.135/01 PRINT-B-MS5.1-IWG4020.3-0/4	P233A-10-AKC	CLS100-PPS 7ML56100AA10 7ML5610-0AA10
LP-FX15D10-000C	100-DNY41R / SER B / FRN 5.002	IC200UDR005-BD、IC200UEX011-B	700503164	ABB/BBC GJR2242000R1 LR370A-E
VAS/100.30	ABB RTU540 1KGT037400R0001 540CMD01	295619-003	P1B1CBR300	S-2-TCPUSE-H-Di6
LFC7530/00	XEV01D XEV01D-5N0B0-001	05512123001 06241042001	K-EW215L03E	9407 489 60001 KS800-CAN
2732732	A53 RS-232 RS-422/485	6SL3040-1MA01-0AA0	TF230	ABB OT16F4N2 1SCA104829R1001
ADV151-E10	PB012002 PB012004C	QUINT-UPS	L051-2110-00-2	170PNT11020
130995	PXC3.E72 S55376-C100	PUV-1530TX	LNL-1003MK	6161/2-61-121-0
RTUA08M TK-S014M	FU5200	M1032-61605	PCO5 PCO5000000AS0	5WG1527-1AB02
KFD2-GS-1.2W	NW-BM85C002	FTA-554 17-550554-001	248RAI1Q4	201381
25/50-0, 5-a04	51202329-202	UR5i-V2F、UR-5i-V2	NC3MD-LX	Brady 76560
L330WHI	7-061-0006 V5L26985	ATV320U04N4C	GE6-P4511S55	CB-400 9120126
AP-ANT-2	025-35150-001	EV425-D4-4	PC1CFZ00-X	ICP11D0350000

Request Recommended Model Support

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

Tags :