SIMATIC ET 200SP HA Digital Input Module
Series: SIMATIC ET 200SP HA
Role: High-availability distributed digital signal acquisition
Lifecycle: PM300: Active Product
Siemens 6DL1131-6BL00-0PH1 SIMATIC ET 200SP HA Digital Input Module is documented here using product-specific Siemens information. The complete order code, system role, interface or channel configuration and lifecycle wording should be checked against the installed equipment before procurement.
| Official lifecycle wording | PM300: Active Product |
| Current note | Siemens currently lists the complete article number as PM300: Active Product. |
| Manufacturer | Siemens |
| Complete article number | 6DL1131-6BL00-0PH1 |
| Product family | SIMATIC ET 200SP HA |
| Module type | Digital input module DI 32x24VDC HA |
| Digital inputs | 32 |
| Rated input voltage | 24 V DC |
| Diagnostics | Channel diagnostics supported |
| Suitable terminal block | H1, P0 |
| Color code | CC00 |
| Dimensions (W × H × D) | 22.5 × 115 × 138 mm |
| Approximate weight | 150 g |
Collects 24 V DC status signals from field devices in ET 200SP HA stations.
Supports distributed I/O architectures used in process automation and plant availability projects.
Channel-level diagnostics help maintenance teams isolate wiring and field-signal problems.
Confirm the full article number, ET 200SP HA station design, H1/P0 terminal block, 24 V DC field wiring, channel assignment and project configuration before replacement.
Request clear nameplate and connector-area photographs, terminal-base details, firmware/project information, quantity and destination. Confirm whether accessories and documentation are required.
Siemens currently lists the complete article number as PM300: Active Product. Lifecycle and migration decisions must be based on the complete article number and current Siemens documentation.
It is a Siemens SIMATIC ET 200SP HA DI 32x24VDC HA digital input module.
The official data lists 32 digital inputs for 24 V DC signals.
Siemens lists terminal block types H1 and P0 for this module.
Yes. The official product data identifies channel diagnostics.
Verify the complete MLFB, terminal block, wiring, project configuration, quantity and requested condition.
Send the exact order code, quantity, destination and installed-system details for availability, compatibility, condition and warranty review.
Structured identification, compatibility review, sourcing coordination, inspection planning and international delivery support for high-availability distributed digital signal acquisition.
We compare the complete Siemens article number, product designation, installed system, electrical or network details and configuration evidence supplied with the inquiry. This reduces the risk of selecting a visually similar but technically different variant.
Nameplate photographs, connector or terminal details, cabinet records, software-project information and existing documentation are reviewed together whenever available.
The requested condition, label evidence, connector areas, enclosure state and included accessories can be aligned before shipment. Inspection points are selected according to the module or device function.
Packaging expectations, documentation, warranty terms and evidence required by the maintenance team can be discussed before commercial release.
Exact-code comparison helps distinguish revisions, interfaces, channel arrangements and accessory requirements before purchase.
Procurement, engineering and maintenance teams receive a consistent checklist built around the actual installed equipment.
Quantity, destination, transport preference and documentation needs are reviewed early for efficient packing and shipment planning.
| Stage | How it supports the order |
| 1. Inquiry | Send 6DL1131-6BL00-0PH1, quantity, destination and available nameplate or installed-system details. |
| 2. Technical review | We compare system fit, interfaces or channels, wiring, project requirements and replacement constraints. |
| 3. Commercial confirmation | Availability, lead time, condition, inspection scope, warranty and delivery plan are clarified before processing. |
| 4. Dispatch support | Protective packing and shipment documentation are coordinated for the selected destination and transport method. |
Share the exact quantity, installed-system details, condition request and destination for an availability and compatibility review.
A 70-model cross-brand reference list for automation, drives, networking, instrumentation and maintenance procurement. Confirm every complete order code before purchase.
| 70 Model References | |||
| 6GK5208-0BA00-2FC2 | 330104-02-09-10-01-00 | PRO3000 | EM100 - 823-865 |
| 0243002430 4.300-2420 | E175096 | REG-K 12X230/16 | 140471-01 3500/70 |
| AB444230035 | 15B10851G1 | KJ2003X1-BA2 /12P2093X102 | R6010 |
| SD55X | BM11D | DSX-PLA004 | ABB M2301 2TMA070080W0012 |
| GT437-491 | CK721-A | PR 4501 | BMP21 |
| EB0518(A) FXYMP-M 1677287 | 5642-50 | PSM700 | 24138990 |
| 60950-50 | ACHILLES-NGFW-300-2-R3B | LM4-LC24J-2A2UN | WV-S1112 |
| F9342DT-01 | 2182-227 | 233.52.100 | 15B10840G1 / 15H50541 |
| Nrk16/A | IEM-3000-8TM | ABB DC505-FBP 1SAP220000R0001 | 1SVR450055R0000 |
| 14YB3-230/C 29317AA8 | D504 | ATM-20 | GVAG-2VK1S |
| sms1600 pn sg001043 | 407860 | OC485 | B4-24-T-5-30 |
| PRO32IN 10290-0000-F REV-C | ABB PM582 / 1SAP140200R0100 | EDB14030 | MP80 |
| 102MC-SC | 02-70325-02 | 1860114A | TSW-552-BS |
| K9149FF-05 AS KG149FA | BOB1024 | 9418/01-201-10 | ABB 61318968 NDPC-02 |
| Eurotherm 2404 | RKLB57 6180BKR000000-H1111 | KNX /644692 | AVPR100S151213 |
| SDVN-2S | LBB4540/04 F01U508294 HW04/02 WK:2017 | EFCB12T-OE1 | O5H700 |
| GTD-2000Tx | ULFIM-D37M-45-XOR | 1606-XLE240EN | WTD-868-T |
| H2O | MA2-08E | ||
Send the exact order code, quantity and destination for availability, configuration and compatibility review.
