Manufactures

The Siemens 6ES7405-0KA02-0AA0 is a wide-range PS405 power supply for the S7-400 PLC. It accepts 24/48/60 V DC input and provides 5 V DC/10 A output to the backplane, featuring short-circuit protection and a rated ambient temperature up to 60°C.    

The General Electric DS200TCDAF1BCM is an EPROM set designed for the Speedtronic Mark V control system. It stores critical firmware and configuration data to ensure reliable operation and precise control of gas and steam turbines.

The General Electric IS200TBAIH1CCC is an Analog Input Terminal Board for the Mark Vle control system. It supports 10 analog inputs for various transmitter types and offers two configurable analog outputs (0-20 mA or 0-200 mA).  

The General Electric IS200STCIH2AED is a high-performance industrial Ethernet board for the Mark VI turbine control series. Supporting 10/100/1000BASE-TX with jumbo frames, it ensures reliable, high-speed communication for precise turbine management.  

The General Electric IS200SHRAH2A is a HART-enabled I/O board for the Mark VIe series. It provides 10 analog inputs and 2 analog outputs, serving as a key interface between PHRA/YHRA I/O packs and HART-compliant field devices.  

The General Electric IS200STAOH2AAA is a Simplex Analog Output Terminal Board for the Mark VIe series. It provides configurable analog outputs and supports high-density Euro-block terminal connections, featuring an onboard ID chip for system diagnostics.  

The General Electric IS200TBTCH1BBB is a PCB component with a conformal coating for protection. It belongs to the Mark VI series, with its first two revisions being backwards-compatible. Specific applications are detailed in GE technical manuals.  

The General Electric DS200DCFBG1BNC is a power supply board for the Speedtronic Mark V control system. It provides system control power and fan supply for wind, steam, and gas turbine applications, and is compatible with GE exciters and drives like the FC2000 series.    

The General Electric IS200EMIOH1ACA is an Exciter Main I/O Board for the EX2100 gas turbine control system. It features 12 relay channels and surface-mount technology, essential for handling input and output operations in the control rack.      

The General Electric IS200ECTBG1A is an Exciter Contact Terminal Board for the EX2100 Excitation Controller series. It provides four Form C contact outputs and manages relay and customer contact inputs, designed exclusively for redundant mode operation.        

The General Electric IS200DSPXH1DBD is a Mark VI Speedtronic printed circuit board used in Innovation Series drives and EX2100 exciters. It represents a functional upgrade over the Mark V system and supports gas, steam, and wind turbine applications.        

The General Electric IS200TRTDH1CCC is a Resistance Temperature Device (RTD) board for the Mark VI control system. It supports 16 three-wire RTD inputs with 8 channels and integrated noise suppression, ensuring accurate temperature measurement in industrial environments.        

The General Electric IS200TRLYH1BGF is a Relay Output Board designed for the Mark VI control system. It houses 12 plug-in magnetic relays with configurable output options, supporting both simplex and TMR configurations in demanding industrial environments.        

The B&R 7DM465.7 is a 2003 series Digital Mixed Module. It provides 16 sink-type inputs and 16 high-side driver outputs, all rated for 24VDC. The module features voltage monitoring, overload protection, and supports operating voltages from 18 to 30VDC with fast switching times.      

The Siemens 6ES7421-7BH01-0AB0 is a 16-channel, 24V DC digital input module for the S7-400 PLC system. It features high-speed input response, configurable filters, comprehensive diagnostic alarms, and two-channel encoder supply. The module provides channel-to-channel isolation and robust wire-break detection.    

The Siemens 6GK5324-0GG00-1AR2 is a managed SCALANCE XR324-12M industrial Ethernet switch designed for 19" rack mounting. Featuring 12 modular ports (electrical or optical), 24V DC power, and robust operation from -40°C to +70°C, it supports PROFINET IO and advanced network management with redundancy for demanding industrial environments.    

The Siemens 6GK5602-0BA10-2AA3 complies with key European EMC, hazardous area, and RoHS directives. It is designed for industrial environments and meets emission and immunity standards. Installation requires adherence to the SIMATIC NET manual.  

The Siemens 6GK5992-2GA00-8AA0 is a SCALANCE X media module. It features two 10/100/1000 Mbit/s RJ45 ports for flexible electrical network connections in industrial applications.  

The Siemens 6SE7090-0XX85-1DA0 is a replacement control module (CUR) for infeed and regenerative feedback units within SIMOVERT drive systems. It is a made-to-order product requiring associated software support.

Product datasheet  Model number 330908-00-15-70-02-05   Manufacture Bently Nevada   System PLC   Condition Brand New   Country of Origin USA   HS Code  8537101190   After-Sales Support 12-months     Product information Bently Nevada 330908-00-15-70-02-05 is a proximity transducer system designed for compact installation in confined spaces. It enables precise monitoring of vibration and position on small shafts under 51mm, ideal for tight side-view or counter-bore applications. Key Features • Product Type: 3300 XL NSv Proximity Transducer System component. • Application: For tight spaces on small shafts or restricted side/rear view. • Measurement: Radial vibration, axial position, tachometer, and Keyphasor signals. • Suitable Target: Shafts under 51 mm or flat targets smaller than 15 mm. • System Includes: Probe, extension cable, and Proximitor sensor. Product Advantages √ High-Precision Monitoring: Provides accurate displacement and vibration measurements, ensuring reliable monitoring of mechanical conditions. √ Rugged and Durable Design: Constructed with industrial-grade materials, resistant to high temperatures, moisture, and corrosion, adaptable to harsh environments. √ Flexible Adaptability: Compatible with 3300 series probes and extension cables, allowing for flexible configuration to meet various installation requirements. √ International Certification Guarantee: Certified by international safety standards such as CN, ATEX/IECEx, and suitable for various industrial scenarios.