Bently Nevada 84661-96 Standard Armored Interconnect Cable

Bently Nevada 84661-96 96 ft 22 AWG armored velocity sensor cable with moisture-resistant connector
Bently Nevada 84661-96 96 ft 22 AWG armored velocity sensor cable with moisture-resistant connector
Bently Nevada 84661-96 96 ft 22 AWG armored velocity sensor cable with moisture-resistant connector

Bently Nevada 84661-96 Standard Armored Interconnect Cable

96 ft stainless-steel-armored, two-conductor shielded cable for compatible velocity-sensor monitoring connections.

Product Overview

Bently Nevada 84661-96 is a maximum-length configuration of the 84661-NN custom armored interconnect cable family. The 96 suffix specifies 96 ft (29 m), which is the maximum published orderable length for this cable series.

The cable provides a protected two-conductor connection between a compatible Bently Nevada velocity sensor and monitoring equipment, with a two-socket moisture-resistant female connector at the sensor end and terminal lugs at the monitor end.

Commercial Status

Manufacturer Bently Nevada, a Baker Hughes business
Complete Part Number 84661-96
Product Family Velocity Sensor Interconnect Cable
Document Basis Official 330500 Velomitor datasheet 141632 Rev. V
Configured Approval Not separately specified for the cable
Lifecycle Status Not stated for this exact configured part number in the current official datasheet

Verified Technical Data

Cable Type Standard armored interconnect cable
Ordering Family 84661-NN; NN specifies length in feet
Configured Length 96 ft (29 m)
Published Length Range 3 ft to 96 ft, in 1 ft increments
Conductors Two-conductor, twisted and shielded
Conductor Size 22 AWG (approximately 0.382 mm²)
Armor Stainless-steel armor over the shielded cable
Sensor-End Connection Two-socket moisture-resistant female connector
Monitor-End Connection Terminal lugs
Published Cable Temperature Range -29°C to +121°C (-20°F to +250°F) in the applicable velocity-sensor cable specification
Housing Restriction Not for use with the 21128 Velocity Transducer Housing

System Fit and Applications

Monitoring Connection

Connects compatible Bently Nevada velocity transducers to machinery-monitoring inputs where an armored field route and terminal-lug termination are required.

Installation Environment

Suited to long industrial cable runs requiring mechanical protection; routing, grounding, connector condition and electrical-noise exposure must be reviewed.

Compatibility and Procurement Checks

  • Confirm the complete 84661-96 marking and required 96 ft cable length.
  • Verify the connected sensor uses the matching two-socket connector and the monitor accepts terminal-lug wiring.
  • Do not specify this cable for a 21128 Velocity Transducer Housing; the official 330500 documentation identifies 89477-NN for that arrangement.
  • Check cable routing, bend protection, shield grounding practice and exposure to heat, moisture and electromagnetic interference.
  • Confirm sensor, monitor channel and hazardous-area installation requirements independently before procurement.

Lifecycle Note

The cited official velocity-sensor datasheet continues to list the 84661-NN cable family but does not state a manufacturer lifecycle designation for 84661-96. Confirm current supply status and application-specific documentation before ordering.

Frequently Asked Questions

What does the 96 suffix mean?

It specifies a 96 ft (29 m) cable, the maximum published length for the 84661-NN family.

What are the cable terminations?

A two-socket moisture-resistant female connector is provided at one end and terminal lugs at the other.

Is the cable mechanically protected?

Yes. The shielded 22 AWG cable is covered by stainless-steel armor.

What should be checked before ordering?

Confirm length, sensor connector, monitor termination, routing conditions, grounding practice and the exclusion for 21128 housings.

Verify 84661-96 Before Procurement

Contact Stockoems for availability verification, configuration review, warranty terms and worldwide delivery coordination.

Email: sales6@apterpower.com  |  WhatsApp: +86 181 5988 9985

Request Product SupportWhatsApp Sales

Industrial Spare Parts Support for 84661-96

Structured verification, condition review, logistics coordination and post-delivery support for critical automation and machinery-monitoring spares.

Procurement Support Workflow

1. Part-Number Verification

We review the complete suffix, product family, thread, case length, cable length, connector and approval configuration against available documentation.

2. Compatibility Review

Your installed extension cable, Proximitor Sensor, total system length, target material and mounting arrangement are checked before order confirmation.

3. Condition and Evidence

When available, label, connector, armor, probe-tip and packaging photographs support a practical pre-shipment condition review.

4. Packing and Logistics

Protective packing, courier options, export documentation and worldwide delivery coordination are arranged for sensitive industrial components.

5. Warranty Coordination

Warranty terms, inspection scope and handling requirements are clarified before dispatch so procurement records remain traceable.

6. Technical Follow-Up

Post-delivery assistance can cover received-part verification, documentation matching and escalation of configuration discrepancies.

Service Environment

Stockoems industrial spare parts service office

Responsive inquiry handling and order coordination

Stockoems technical verification workspace

Documentation and configuration review

Stockoems global delivery support team

Global logistics and after-sales communication

Information to Send With Your Inquiry

  • Complete part number and clear nameplate photographs
  • Installed probe, extension cable and Proximitor Sensor numbers
  • Required quantity, destination country and requested delivery date
  • Condition preference and required certificates or inspection records
  • Application notes covering machine type, target material and mounting restrictions

Verify 84661-96 Before Procurement

Contact Stockoems for availability verification, configuration review, warranty terms and worldwide delivery coordination.

Email: sales6@apterpower.com  |  WhatsApp: +86 181 5988 9985

Request Product SupportWhatsApp Sales

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Looking for News & Events?
Contact Us #
+8618159889985

Our hours

Monday–Sunday: 8:30 AM–5:00 PM
(Eastern Time)

Home

Products

whatsApp

contact