Product Summary

The Vibro-Meter VM600 CMC16 200-530-022-01 is a condition monitoring card for first-generation VM600 rack-based machinery monitoring systems. It acquires dynamic signals for vibration analysis and supports sixteen dynamic channels, with up to four channels configurable for tachometer measurements. The CMC16 operates with VM600 CMS software and is normally paired with an IOC16T input/output card in an ABE04x rack. It is relevant to maintenance, system restoration and legacy spare-part procurement. Before ordering, confirm the complete part number, card label, associated IOC16T configuration, rack type, firmware, hardware revision and software compatibility.

Key Product Information

Functions and Technical Data

The CMC16 is the processing card in a CMC16/IOC16T card pair used by the VM600 condition monitoring system. Official Vibro-Meter material identifies sixteen dynamic channels; up to four can be configured as tachometer channels. The published channel bandwidth is 0 to 20 kHz, the dynamic-channel conversion is 12 bit, and the tachometer speed range is 15 to 30,000 RPM. The legacy card provides up to ten measurements per dynamic channel and spectrum resolution up to 400 lines.

• Sixteen dynamic measurement channels for condition monitoring.
• Up to four dynamic channels configurable for tachometer measurement.
• Quasi-continuous sequential acquisition for the CMC16/IOC16T generation.
• Configuration and operation through VM600 CMS software.
• Installed in the front of an ABE040 or ABE042 rack with the IOC16T at the rear.

Applications

• Vibration data acquisition in VM600 machinery condition monitoring systems.
• Tachometer and phase-related measurements when correctly configured.
• Maintenance replacement of a matching CMC16 card in an existing VM600 rack.
• Restoration of legacy monitoring channels using the existing IOC16T interface.

Compatibility and Revision Notice

Confirm the complete 200-530-022-01 identifier and every suffix against the original label. Also verify the VM600 rack type, associated IOC16T card, channel configuration, signal type, voltage and interface requirements, hardware revision, firmware or software version, installation position and the original equipment label photos. Do not assume that another CMC16 suffix is interchangeable.

Maintenance and Procurement Checklist

• Record the complete part number from the installed card.
• Photograph the front panel, side label and associated IOC16T card.
• Confirm rack model, slot position and current VM600 CMS configuration.
• Request written confirmation of condition, revision, availability and warranty terms.
• Plan configuration backup and controlled replacement by qualified personnel.

Please contact us to confirm the exact revision, firmware version, condition and availability before ordering.

FAQ

Is VM600 CMC16 200-530-022-01 currently available?

Availability changes and must be checked against the complete part number when you request a quotation.

What condition can this CMC16 card be supplied in?

Contact us to confirm the offered condition and request current product and label photos before ordering.

How can I confirm compatibility?

Send the rack model, IOC16T details, installed-card label, hardware and software information so the configuration can be reviewed.

Is the complete suffix important?

Yes. Use the complete 200-530-022-01 identifier and verify the label rather than matching only the CMC16 family name.

Can this product be shipped internationally?

Worldwide shipping options can be quoted after the destination country and order requirements are confirmed.

Request Product Verification

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.