Armored M8×1 metric probe with 50 mm case, 0.5 m lead and protected ClickLoc connection.
Bently Nevada 330904-00-05-05-01-05 is a standard-mount 3300 NSv metric proximity probe for non-contact shaft vibration and position measurements where installation clearance is limited. The complete ordering code identifies an M8×1 probe with stainless-steel armor, 0 mm unthreaded length, 50 mm overall case length, 0.5 m total length, a standard cable with a protected miniature coaxial ClickLoc connector, and Multiple Approvals.
The NSv design is intended for centrifugal air compressors, refrigeration compressors, process gas compressors and other machines with restricted counterbore, side-view or rear-view space. Final performance depends on the complete matched NSv probe, extension cable and Proximitor Sensor system.
| Manufacturer | Bently Nevada, a Baker Hughes business |
| Complete Part Number | 330904-00-05-05-01-05 |
| Product Family | 3300 XL NSv Proximity Transducer System |
| Document Basis | Official datasheet 147385 Rev. R |
| Configured Approval | Multiple Approvals |
| Lifecycle Status | Not stated for this exact configured part number in the current official datasheet |
| Probe Type | 3300 NSv metric standard-mount proximity probe |
| Thread | M8×1 |
| Armor | Stainless-steel armor |
| Unthreaded Length | 0 mm |
| Overall Case Length | 50 mm |
| Total Probe Length | 0.5 m (20 in) |
| Connector and Cable | Miniature coaxial ClickLoc connector with connector protector; standard cable |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel |
| Probe Cable | 75 Ω coaxial, FEP insulated |
| Probe DC Resistance | 4.0 ± 0.5 Ω for the 0.5 m probe |
| Probe Temperature Range | -52°C to +177°C (-62°F to +351°F); sustained exposure below -34°C may reduce pressure-seal life |
| Matched-System Linear Range | 1.5 mm (60 mils), approximately 0.25 to 1.75 mm from target |
| Recommended System Gap | 1.0 mm (40 mils) |
| Matched-System Scale Factor | 7.87 V/mm (200 mV/mil), subject to the official system tolerances |
| Typical Frequency Response | 0 to 10 kHz, +0/-3 dB for the complete matched system |
Radial vibration, radial position, axial thrust position, tachometer and zero-speed measurement, plus phase-reference or Keyphasor signals when used in a correctly engineered NSv system.
Compact compressor trains and other rotating equipment with small targets or restricted mounting clearances, subject to target geometry, probe spacing and calibration checks.
The official 3300 XL NSv datasheet identifies this ordering family and its current configuration options but does not state a manufacturer lifecycle designation for 330904-00-05-05-01-05. Confirm current supply status and approved replacement strategy during procurement.
Contact Stockoems for availability verification, configuration review, warranty terms and worldwide delivery coordination.
Email: sales6@apterpower.com | WhatsApp: +86 181 5988 9985
Structured verification, condition review, logistics coordination and post-delivery support for critical automation and machinery-monitoring spares.
We review the complete suffix, product family, thread, case length, cable length, connector and approval configuration against available documentation.
Your installed extension cable, Proximitor Sensor, total system length, target material and mounting arrangement are checked before order confirmation.
When available, label, connector, armor, probe-tip and packaging photographs support a practical pre-shipment condition review.
Protective packing, courier options, export documentation and worldwide delivery coordination are arranged for sensitive industrial components.
Warranty terms, inspection scope and handling requirements are clarified before dispatch so procurement records remain traceable.
Post-delivery assistance can cover received-part verification, documentation matching and escalation of configuration discrepancies.
Responsive inquiry handling and order coordination
Documentation and configuration review
Global logistics and after-sales communication
Contact Stockoems for availability verification, configuration review, warranty terms and worldwide delivery coordination.
Email: sales6@apterpower.com | WhatsApp: +86 181 5988 9985
Contact Stockoems for availability verification, configuration review, warranty terms and worldwide delivery coordination.
Email: sales6@apterpower.com | WhatsApp: +86 181 5988 9985
