Bently Nevada 168209-0317-127-90-05-01 3300 XL 8 mm Probe

168209-0317-127-90-05-01 Custom-coded 3300 XL 8 mm armored proximity probe product and nameplate

Inquiry now

BENTLY NEVADA PART · OFFICIAL DOCUMENTATION REVIEWED

168209-0317-127-90-05-01

Custom-coded 3300 XL 8 mm armored proximity probe

Buyer Summary

Bently Nevada 168209-0317-127-90-05-01 is a custom-coded 3300 XL 8 mm proximity probe. Public Bently Nevada literature confirms 168209 as a controlled sensor-accessory part family, but the custom case dimensions must be matched to the original nameplate and drawing.

Accuracy note: Values below are limited to the exact order-code information and system data supported by public Bently Nevada documentation. Nameplate, machine BOM and project drawings remain controlling for replacement selection.

168209-0317-127-90-05-01 Ordering-Code Details

Field	Verified interpretation
Full order code	168209-0317-127-90-05-01
Base system	3300 XL 8 mm proximity transducer system
Thread stated on installed order	3/8-24 UNF — verify from the original label/drawing
Total cable length stated on order	9.0 m — verify before matching a Proximitor sensor
Construction stated on order	Armored cable
Custom dimensions	0317 / 127 — preserve exactly and confirm against project drawing

Official Technical Information

Parameter	Published value / selection note
System linear range	2 mm (80 mil) with matched 3300 XL 8 mm components
Scale factor	7.87 V/mm (200 mV/mil) nominal
Frequency response	0 to 10 kHz, +0/-3 dB
Minimum flat target	15.2 mm diameter
Recommended minimum shaft diameter	76.2 mm
System matching	Probe and any extension cable must equal the Proximitor sensor system length

Application and Compatibility

Custom probes should be purchased from the complete order code rather than from a generic 3300 XL 8 mm description. Send the full label, case measurements, armor/connector photos and the monitor-system BOM when requesting a quotation.

Match the label
Confirm every character in 168209-0317-127-90-05-01 and photograph the installed nameplate.

Match the system
Provide the machine model, monitor channel, existing sensor chain and project BOM.

Ordering 168209-0317-127-90-05-01

For an accurate quotation, send the information below. Availability, condition, lead time and commercial terms are confirmed in the quotation and are not assumed from the product page.

RFQ item	What to provide
Exact identification	168209-0317-127-90-05-01
Quantity and condition	Required units and requested condition
Installed evidence	Clear nameplate, connector, mounting and complete product photos
System details	Machine / monitor model, sensor-chain part numbers, BOM or drawing reference
Delivery	Destination country and required date

168209-0317-127-90-05-01 FAQ

What is 168209-0317-127-90-05-01?
Bently Nevada 168209-0317-127-90-05-01 is a custom-coded 3300 XL 8 mm proximity probe. Public Bently Nevada literature confirms 168209 as a controlled sensor-accessory part family, but the custom case dimensions must be matched to the original nameplate and drawing.

Can a similar part number be used instead?
Do not assume interchangeability. Match the full order string, mechanical configuration, system length or connector details, approvals and the machine BOM.

Why are some values described as system-level specifications?
Bently Nevada publishes many performance values for a complete matched transducer system. A probe, cable or Proximitor component alone does not guarantee those values when combined incorrectly.

What should be sent with an RFQ?
Send the exact code, quantity, destination, installed label photos, machine model and all connected sensor-chain part numbers.

Official Bently Nevada Reference

Bently Nevada 3300 XL 8 mm Datasheet 141194

Request a Quote for 168209-0317-127-90-05-01

Send the exact part number and installed label for a compatibility-focused quotation.

Email Inquiry WhatsApp Inquiry

Related resources: Browse Bently Nevada products | View related model

BENTLY NEVADA PROCUREMENT SUPPORT

Service for 168209-0317-127-90-05-01

Our RFQ process focuses on exact identification and documented compatibility for Custom-coded 3300 XL 8 mm armored proximity probe.

1 · Part-number check
We record the complete 168209-0317-127-90-05-01 order string and compare label evidence.

2 · Configuration review
System length, mounting, connector, approval and modification fields are reviewed where applicable.

3 · Official-data check
Public Bently Nevada datasheets are used for supported system and ordering information.

4 · Quotation and shipping
Condition, quantity, lead time, packing, destination and commercial terms are confirmed in writing.

Information Required

Exact part number and quantity
Clear photos of the existing nameplate, connector and mounting
Machine, monitor and sensor-system model numbers
BOM, drawing or maintenance-record reference
Destination and requested delivery date

Compatibility notice: Similar descriptions do not prove interchangeability. Installation and machine-protection work must follow applicable Bently Nevada manuals and site procedures.

Email: sales6@apterpower.com WhatsApp: +86 181 5988 9985

MODEL SELECTION GUIDANCE

Related Models for 168209-0317-127-90-05-01

The models below are related by product family or ordering structure. They are not presented as automatic replacements.

Model / family	Selection difference
330102 family	Standard 3/8-24 armored 3300 XL 8 mm probes
330104 family	Standard M10 x 1 armored metric probes
168209 custom order	Do not substitute a standard probe without dimensional and system-length confirmation

Before Choosing an Alternative

Compare every character of the order code.
Match system length, probe/cable/sensor family and electrical configuration.
Confirm thread, case, penetration, connector, armor and mounting details.
Verify approval suffixes and custom MOD fields.
Use the machine BOM or Bently Nevada project documentation as the final reference.

Need a model check? Send both labels and the machine/system information to sales6@apterpower.com.

Tags :