Bently Nevada 146054-14-10-02-00 3300 Ceramic Capped Proximity Probe

Forward-mount 3/8-24 UNF probe with a 1.4-inch case, 1.0-metre standard cable and no agency approval option.

Product Summary

The Bently Nevada 146054-14-10-02-00 is a 3300 ceramic capped proximity probe designed for machinery monitoring in aggressive chemical or high-pressure environments. Its alumina ceramic tip and AISI 304 stainless-steel case protect the sensing assembly, while the probe works with a 3300 Proximitor Sensor and matching extension cable. This exact configuration uses a 3/8-24 UNF threaded case, 1.4-inch overall case length, 1.0-metre total length, miniature coaxial ClickLoc connector and standard cable. Before ordering, verify the complete suffix, system length, extension cable, Proximitor Sensor, target material, gap requirements and original product label.

Configuration Decoded

Key Product Information

Performance and Construction

Installation and System Matching

1. Match the 1.0-metre probe with the correct extension cable and 3300 Proximitor Sensor for the required total system length.
2. Confirm the 3/8-24 UNF mounting thread and ensure thread engagement does not exceed the published limit.
3. Gap the probe electrically and avoid contact between the ceramic tip and target surface.
4. Review monitor configuration because the ceramic-capped probe curve is shifted from a standard 3300 XL probe.
5. Verify target material; factory Proximitor calibration is normally based on AISI 4140 steel.

Applications

• Relative shaft vibration measurement in aggressive chemical environments.
• Axial or radial position monitoring where a ceramic-capped 3300 system is specified.
• Machinery monitoring in high-pressure process environments within the stated installation requirements.
• Maintenance replacement of an exact 146054-14-10-02-00 probe configuration.

Compatibility and Revision Notice

Confirm the complete 146054-14-10-02-00 suffix, 1.0-metre probe length, required total system length, extension cable, 3300 Proximitor Sensor, monitor configuration, voltage and interface, installation dimensions, target material, product condition and original label photos. Do not substitute a standard 3300 XL probe or another ceramic probe configuration without engineering review.

Please contact us to confirm the exact revision, firmware version, condition and availability before ordering.

FAQ

Is 146054-14-10-02-00 currently available?

Availability changes and must be confirmed for the exact suffix when you request a quotation.

What does the 14-10-02-00 configuration mean?

It specifies a 1.4-inch case, 1.0-metre total length, miniature coaxial ClickLoc connector with standard cable, and no agency approval option.

Can it replace a standard 3300 XL probe directly?

Do not assume direct interchangeability. The ceramic-capped probe has a shifted response curve and the monitor configuration may require review.

How should compatibility be confirmed?

Provide the complete probe, extension cable and Proximitor Sensor numbers, target material, monitor details and original label photos.

Can product and label photos be supplied?

Request current photos of the specific offered item before ordering.

Can it be shipped internationally?

Worldwide shipping options are checked after the quantity and destination country are confirmed.

Request Product Verification

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.