• High RFI/EMI Immunity: Offers superior resistance to radio frequency interference, allowing installation in fiberglass housings without metallic conduits.

• Corrosion-Resistant Connectors: Features gold-plated ClickLoc connectors that resist corrosion and maintain signal integrity in harsh environments.

• Secure Locking Mechanism: Utilizes a patented locking mechanism that prevents connector loosening due to vibration.

• FluidLoc Option: Prevents oil and liquid leakage through the cable interior, ensuring machine integrity.

• Wide Temperature Range: Supports standard temperatures up to 177°C (350°F) and extended range (ETR) options for up to 218°C (425°F).

• Robust Cable Retention: Employs TiLoc and CableLoc designs providing 330 N (75 lbf) pull strength for durability.

Features

• Rugged Coaxial Shielding: Features a flexible stainless steel armor mesh with an outer fluorinated ethylene propylene (FEP) jacket to protect the triaxial cable from physical cutting or crushing.
• Integrated Connector Guard: Ships standard with a factory-installed fluorosilicone connector protector to isolate the gold connection joints against industrial fluid contamination.
• Deep Case Insertion: Combines a 130mm overall metric case length with a 60mm unthreaded shank to simplify gapping adjustments through thick fluid-film bearing walls.
• API 670 Standardization: Fully complies with international oil and gas instrumentation regulations for mechanical interchangeability, linear scaling, and thermal tracking accuracy.
• Hazardous Area Clearance: Holds comprehensive global explosive workspace safety certifications including international CSA, ATEX, and IECEx approvals.

Ordering Information

Installation & Troubleshooting FAQ

Q1: What are the specific thread limits and torque metrics for mounting this 130mm long probe barrel?

A: The maximum thread engagement length for an M10x1 casing is strictly capped at 15 mm to mitigate physical thread binding or sticking. Secure the probe barrel using an 8mm wrench flat profile, and fasten the locknut to the recommended nominal field installation torque of 11.2 N•m (100 in•lbf). If the machine bracket geometry restricts thread engagement down to only the first three threads of the hole, drop the tightening limits to a maximum threshold of 22.6 N•m (200 in•lbf) to preserve structural integrity.

Q2: What is the physical setup sequence for the integrated '01' connector protector option?

A: The '01' option features a pre-installed fluorosilicone environmental adapter surrounding the female terminal interface. When routing the leading lines through narrow or tight conduits, simply slide the flexible sleeve backward away from the gold-plated brass ClickLoc connector head. Once the leading line connects to the extension cable with a distinct tactile "click," pull the sleeve forward over the mated junction to form an airtight environmental seal that isolates the core pins from moisture ingress.

Q3: Why does my monitoring instrument track a sudden reduction in signal scale factor near a shaft shoulder?

A: This behavior indicates a classic "Side Effect" fault caused by inadequate radial clearance around the 8mm sensor tip. If the metallic counterbore path diameter is too narrow or if the tip sits too close to an abrupt physical step on the shaft target face, the electromagnetic field couples with the adjacent metal walls. To maintain the standard 7.87 V/mm (200 mV/mil) incremental scale factor, ensure the surrounding counterbore diameter is machined to a minimum width of 24mm.

Q4: Can I use silicone tape instead of a dedicated connector protector inside an internal gear housing?

A: No, do not use manual self-fusing silicone tape inside areas exposed to continuous machinery lubricants or turbine oils. While standard silicone tape provides good electrical isolation for clean external junction boxes, petroleum-based hydrocarbons will degrade the adhesive layer over time and cause fluid ingress. For high-exposure internal spaces, always specify factory-installed connector protectors or select specialized FluidLoc cables to block internal oil migration routes.

Ordering Information

• Accessories