330104-04-12-05-01-05 is a Bently Nevada eddy current proximity probe featuring flexible stainless steel armor and an integrated M10x1 metric thread. Fully compatible with 3300 XL Proximitor sensors, this unit works seamlessly with automated monitoring frameworks to deliver flexible mid-depth machinery installation and stable industrial network communication.
Specifications
Unthreaded Length Option：40 mm
Overall Case Length Option：120 mm
Total Length Option：0.5 meter (1.6 feet)
Connector and Cable-Type Option：Miniature coaxial ClickLoc connector with connector protector, standard cable
Agency Approval Option:CSA, ATEX, IECEx Approvals
Dimensions：1.8x1.5x68cm
Weight：0.1kg
Enviromental Strength
-
DIN-Rail Compatibility: Designed for high-density DIN-rail installations, saving panel space in control cabinets.
-
Electrical Isolation: Integrated mounting base provides electrical isolation, eliminating the need for separate isolator plates.
-
Finger-Tight Connectors: Corrosion-resistant ClickLoc connectors require only finger-tight torque and lock securely against vibration.
-
Oil Leakage Prevention: Optional FluidLoc cable construction prevents oil or liquid migration through the cable interior.
-
High Pull Strength: Patented CableLoc design delivers 330 N (75 lbf) pull strength for reliable cable retention.
-
CE Mark Compliance: Improved RFI/EMI immunity meets European CE mark requirements without shielded conduit.
Features
- Rugged Coaxial Shielding: Features a flexible stainless steel armor mesh with an outer fluorinated ethylene propylene (FEP) jacket to protect the triaxial cable from physical cutting or crushing.
- Integrated Connector Guard: Ships standard with a factory-installed fluorosilicone connector protector to isolate the gold connection joints against industrial fluid contamination.
- Mid-Depth Case Insertion: Combines a 120mm overall metric case length with a 40mm unthreaded shank to simplify gapping adjustments through fluid-film bearing walls.
- API 670 Standardization: Fully complies with international oil and gas instrumentation regulations for mechanical interchangeability, linear scaling, and thermal tracking accuracy.
- Hazardous Area Clearance: Holds comprehensive global explosive workspace safety certifications including international CSA, ATEX, and IECEx approvals.
Theory of Operation
The 330104-04-12-05-01-05 works on the physical principles of high-frequency eddy current induction. The 3300 XL Proximitor sensor drives an alternating radio frequency (RF) signal through the triaxial cable into a precision-wound coil housed inside the polyphenylene sulfide (PPS) probe tip. This coil projects an oscillating electromagnetic field into the surrounding workspace. When an observed conductive surface, such as an AISI 4140 steel shaft target, enters this field, localized eddy currents are generated across the metal's face. The physical distance change between the tip and target dynamically alters the impedance of the RF loop. The Proximitor sensor continuously tracks these impedance shifts and translates them into a linear DC voltage output directly proportional to the physical gap, enabling accurate monitoring of dynamic machinery vibration and static displacement.
Ordering Information
|
Model Option Block |
Parameter Selection |
Decoded Hardware Specifications |
|
Base Model |
330104 |
3300 XL 8 mm Metric Probe, M10 x 1 thread, with armor |
|
A: Unthreaded Length |
04 |
40 mm unthreaded section length profile |
|
B: Overall Case Length |
12 |
120 mm overall metric case length profile |
|
C: Total Length |
05 |
0.5 meter (1.6 feet) integral leading cable length |
|
D: Connector/Cable Type |
01 |
Miniature coaxial ClickLoc connector with connector protector, standard FEP cable |
|
E: Agency Approval |
05 |
CSA, ATEX, IECEx hazardous area safety approvals |
Accessories
| 141078 | 3300 XL 8 mm and 3300 5 mm Proximity Transducer System Manual. |
| 175751 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x12”x6”. Can hold up to 8 Proximitor Sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 176467 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x8”x6”. Can hold up to 4 3300XL Proximitor Sensors in both DIN-mount and panel-mount configurations. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 330181 | 3300 XL Multi-Purpose Stainless Steel Housing. 13”x9.5”x7”. Can hold up to 8 Proximitor sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. Primarily used by customers requiring hazardous area approvals fro their installations. Available with ATEX Zone 0 and Zone 1 and North American Division 1 and Division 2 certifications. |
| 02120015 | Bulk field wire. 1.0 mm2 (18 AWG), 3 conductor, twisted, shielded cable with drain wire. Specify length in feet. |
| 138492-01 | Replacement panel-mount mounting pad. |
| 138493-01 | Replacement DIN-mount mounting pad. |
| 148722-01 | 3300 XL test plug. The 3300 XL Test Plug contains 3 small test pins attached to 3 color-coded 1-meter wires, each terminated in a banana plug. The 3-pin adapter plugs into the test pin holes on 3300 XL-style Proximitor sensors. You can use this test plug to check the performance of the Proximitor sensor from the test pin holes in the terminal strip without removing the field wiring. |
| 04310310 | 3300 XL Proximitor Sensor panelmount screw. One 6-32 UNC thread forming mounting screw. Four screws are required for each Proximitor sensor. (Screws supplied standard with Proximitor housings [3300 XL panel-mount option]). |
| 03200006 | Silicone self-fusing tape. A 9.1- meter (10-yard) roll of silicone tape to protect connectors. This tape is easy to install and provides excellent electrical isolation and protection from the environment. We do not recommend using this tape inside the casing of the machine. |
| 40113-02 | Connector Protector Kit. Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. |
| 136536-01 | Connector protector adapter. This allows you to use connector protector installation tools manufactured prior to 1998 with 75Ω ClickLoc connectors. |
| 40180-02 | Connector protectors. Package contains 10 pairs of connector protectors for 3300 XL 8 mm probes and extension cables. |
| 03839410 | 75Ω triaxial male connector protector. Male connector protectors install onto the extension cable and attach to the female connector protector on the probe, providing environmental protection of connectors. |
| 03839420 | 75Ω triaxial female connector protector. Female connector protectors install onto the probe lead and attach to the male connector protector on the extension cable, providing environmental protection of connectors. You can also place the connector protector onto the extension cable to slide over the connection to the Proximitor sensor to protect that connection from the environment. |
| 04301007 | 3/8-24 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 04301008 | M10 x 1 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 330153-01 | 3300 XL connector kit. Used on 3300 XL 8 mm probes and extension cables. Contains 1 pair each of male and female ClickLoc connectors, 2 colorcoded sleeves, 2 pieces of slit FEP tubing, and 1 strip of silicone tape. |
| 330153-09 | 3300 XL ETR Connector Kit. Used on ETR 3300 XL 8mm probes and 3300 ETR XL extension cables. Contains one pair of male and female ClickLoc connectors, two color-coded sleeves, two pieces of high temperature slit FEP tubing, and one strip of silicon tape. |
| 163356 | Connector Crimp Tool Kit. Includes 1 set of multiconnector inserts and connector installation instructions. Compatible only with 330153 connector kits or with probes shipped in 2003 or later with ClickLoc connectors uninstalled. Supplied with carrying case. |
For the quick assistance message us on WhatsApp at 
