The 330104-01-11-50-02-05 is a Bently Nevada 3300 XL 8mm proximity probe featuring a rugged stainless steel armored sleeve and comprehensive hazardous area safety certifications. Fully compatible with 3300 XL Proximitor Sensors, this unit works seamlessly with industrial monitoring systems to deliver high-precision non-contact vibration logging and stable long-term machine position tracking.
Specifications
• Product Type: 3300 XL 8 mm eddy current proximity probe for vibration/displacement monitoring.
• Total Length: 1.5 meters (4.9 feet) with standard cable configuration.
• Connector: Miniature coaxial ClickLoc connector for secure and reliable connections.
• Interchangeability: Fully interchangeable with probes, cables, and Proximitor sensors; no bench calibration required.
• Tip Design: Molded PPS plastic probe tip with thicker coil encapsulation for enhanced durability.
• Certifications: Available with CSA, ATEX, and IECEx agency approvals for hazardous areas.
System Compatibility and Alternative Models
System Compatibility
- Connects directly to a matching 5.0-meter 3300 XL Proximitor Sensor without needing separate extension cables.
- Fully compatible with legacy non-XL 3300 series 5mm and 8mm transducer components.
- Adheres completely to American Petroleum Institute API 670 standards for system interchangeability.
Alternative Models & Differences
- 330103-01-11-50-02-05: Identical mechanical dimensions and thread options but configured with an unarmored standard coaxial leading cable.
- 330104-00-11-50-02-05: Features a fully threaded 110mm case length, omitting the 10mm unthreaded front section.
- 330104-01-11-50-01-05: Includes a pre-installed factory silicone connector protector over the miniature ClickLoc coaxial terminal junction.
Ordering Information Table
|
Designator |
Option Code |
Description |
|
Base Model |
330104 |
3300 XL 8 mm Proximity Probe, M10 x 1 thread, with armor |
|
A: Unthreaded Length |
01 |
10 mm unthreaded section option |
|
B: Overall Case Length |
11 |
110 mm overall metric case length option |
|
C: Total Length |
50 |
5.0 meters (16.4 feet) total loop cable length |
|
D: Connector Type |
02 |
Miniature coaxial ClickLoc connector, standard cable |
|
E: Agency Approval |
05 |
Multiple Approvals (North American, ATEX, and IECEx hazardous area safety certifications) |
FAQ
Q1: What is the Bently Nevada 330104-01-11-50-02-05?
A1: It is a 3300 XL 8 mm eddy current proximity probe for vibration and displacement monitoring.
Q2: What is the total length of this probe?
A2: The probe has a total length of 1.5 meters (4.9 feet) with standard cable.
Q3: Does this probe require bench calibration?
A3: No, it features full interchangeability with probes, cables, and Proximitor sensors without matching or bench calibration.
Q4: What connector type does this probe use?
A4: It uses a miniature coaxial ClickLoc connector for secure and reliable connections.
Q5: What agency approvals are available for this probe?
A5: It is available with CSA, ATEX, and IECEx approvals for hazardous area installations.
Accessories
| 141078 | 3300 XL 8 mm and 3300 5 mm Proximity Transducer System Manual. |
| 175751 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x12”x6”. Can hold up to 8 Proximitor Sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 176467 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x8”x6”. Can hold up to 4 3300XL Proximitor Sensors in both DIN-mount and panel-mount configurations. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 330181 | 3300 XL Multi-Purpose Stainless Steel Housing. 13”x9.5”x7”. Can hold up to 8 Proximitor sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. Primarily used by customers requiring hazardous area approvals fro their installations. Available with ATEX Zone 0 and Zone 1 and North American Division 1 and Division 2 certifications. |
| 02120015 | Bulk field wire. 1.0 mm2 (18 AWG), 3 conductor, twisted, shielded cable with drain wire. Specify length in feet. |
| 138492-01 | Replacement panel-mount mounting pad. |
| 138493-01 | Replacement DIN-mount mounting pad. |
| 148722-01 | 3300 XL test plug. The 3300 XL Test Plug contains 3 small test pins attached to 3 color-coded 1-meter wires, each terminated in a banana plug. The 3-pin adapter plugs into the test pin holes on 3300 XL-style Proximitor sensors. You can use this test plug to check the performance of the Proximitor sensor from the test pin holes in the terminal strip without removing the field wiring. |
| 04310310 | 3300 XL Proximitor Sensor panelmount screw. One 6-32 UNC thread forming mounting screw. Four screws are required for each Proximitor sensor. (Screws supplied standard with Proximitor housings [3300 XL panel-mount option]). |
| 03200006 | Silicone self-fusing tape. A 9.1- meter (10-yard) roll of silicone tape to protect connectors. This tape is easy to install and provides excellent electrical isolation and protection from the environment. We do not recommend using this tape inside the casing of the machine. |
| 40113-02 | Connector Protector Kit. Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. |
| 136536-01 | Connector protector adapter. This allows you to use connector protector installation tools manufactured prior to 1998 with 75Ω ClickLoc connectors. |
| 40180-02 | Connector protectors. Package contains 10 pairs of connector protectors for 3300 XL 8 mm probes and extension cables. |
| 03839410 | 75Ω triaxial male connector protector. Male connector protectors install onto the extension cable and attach to the female connector protector on the probe, providing environmental protection of connectors. |
| 03839420 | 75Ω triaxial female connector protector. Female connector protectors install onto the probe lead and attach to the male connector protector on the extension cable, providing environmental protection of connectors. You can also place the connector protector onto the extension cable to slide over the connection to the Proximitor sensor to protect that connection from the environment. |
| 04301007 | 3/8-24 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 04301008 | M10 x 1 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 330153-01 | 3300 XL connector kit. Used on 3300 XL 8 mm probes and extension cables. Contains 1 pair each of male and female ClickLoc connectors, 2 colorcoded sleeves, 2 pieces of slit FEP tubing, and 1 strip of silicone tape. |
| 330153-09 | 3300 XL ETR Connector Kit. Used on ETR 3300 XL 8mm probes and 3300 ETR XL extension cables. Contains one pair of male and female ClickLoc connectors, two color-coded sleeves, two pieces of high temperature slit FEP tubing, and one strip of silicon tape. |
| 163356 | Connector Crimp Tool Kit. Includes 1 set of multiconnector inserts and connector installation instructions. Compatible only with 330153 connector kits or with probes shipped in 2003 or later with ClickLoc connectors uninstalled. Supplied with carrying case. |
For the quick assistance message us on WhatsApp at 
