330104-00-06-05-01-00 is a Bently Nevada eddy current proximity probe featuring flexible stainless steel armor and an integrated M10x1 metric thread. Fully compatible with 3300 XL Proximitor sensors, this unit works seamlessly with industrial monitoring systems to deliver rugged vibration tracking and stable industrial network communication.
Specifications
Unthreaded Length Option：00 mm
Overall Case Length Option：60 mm
Total Length Option：0.5 meter (1.6 feet)
Connector and Cable-Type Option：Miniature coaxial ClickLoc connector with connector protector, standard cable
Agency Approval Option:Not required
Dimensions：1.8x1.6x71cm
Weight：0.08kg
Enviromental Strength
-
One-Meter Configuration: Integrated probe-to-sensor design without extension cable reduces potential connection points.
-
Factory Calibration: Pre-calibrated to AISI 4140 steel for consistent performance out of the box.
-
Target Material Flexibility: Optional calibration available for other target materials upon request.
-
RFI Immunity: High resistance to radio frequency interference enables installation in non-metallic housings.
-
SpringLoc Wiring: Tool-less terminal strips provide secure field wiring without screw-type mechanisms.
-
Compact Packaging: Physical design supports high-density DIN-rail mounting for space-constrained panels.
Specific Application
- Radial vibration and axial position monitoring on high-speed industrial machinery inside exposed, high-abrasion environments.
- Shaft displacement measurement where the integrated leading cable is routed through tight machinery housings with sharp edges.
- Proximity tracking loops requiring a short 0.5-meter cable run paired with an integrated connector protector to withstand oil or water washdowns.
System Compatibility & Alternatives
- System Compatibility:
Fully compatible with the Bently Nevada 3300 XL Proximitor Sensor (e.g., 330180) and 3300 XL Extension Cables. It supports complete physical and electrical interchangeability with older, non-XL 3300 series 5mm and 8mm transducer systems, maintaining backward compatibility compliant with API 670 standards. - Alternative Model & Differences:
The corresponding alternative configuration within the same metric option block is catalog number 330103-00-06-05-01-00. - The Difference: The 330104-00-06-05-01-00 features a flexible AISI 302 or 304 stainless steel armor sleeve with an outer FEP jacket surrounding its triaxial cable, providing maximum defense against cutting or crushing. The 330103 alternative is constructed completely "without armor," featuring a smooth, unshielded FEP outer cable insulation layer designed exclusively for clean running pathways inside rigid internal conduits.
Ordering Information
|
Model Option Block |
Parameter Selection |
Decoded Hardware Specifications |
|
Base Model |
330104 |
3300 XL 8 mm Metric Probe, M10 x 1 thread, with armor |
|
A: Unthreaded Length |
00 |
0 mm unthreaded length (fully threaded case) |
|
B: Overall Case Length |
06 |
60 mm overall case length |
|
C: Total Length |
05 |
0.5 meter (1.6 feet) integral cable length |
|
D: Connector/Cable Type |
01 |
Miniature coaxial ClickLoc connector with connector protector, standard cable |
|
E: Agency Approval |
00 |
No regulatory agency approvals required |
Accessories
| 141078 | 3300 XL 8 mm and 3300 5 mm Proximity Transducer System Manual. |
| 175751 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x12”x6”. Can hold up to 8 Proximitor Sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 176467 | 3300 XL Multi-Purpose Stainless Steel Housing. 12”x8”x6”. Can hold up to 4 3300XL Proximitor Sensors in both DIN-mount and panel-mount configurations. (Available with ATEX Zone 0 and Zone 1 certifications.) |
| 330181 | 3300 XL Multi-Purpose Stainless Steel Housing. 13”x9.5”x7”. Can hold up to 8 Proximitor sensors in a DIN-mount configuration or 6 Proximitor Sensors in a panelmount configuration. Primarily used by customers requiring hazardous area approvals fro their installations. Available with ATEX Zone 0 and Zone 1 and North American Division 1 and Division 2 certifications. |
| 02120015 | Bulk field wire. 1.0 mm2 (18 AWG), 3 conductor, twisted, shielded cable with drain wire. Specify length in feet. |
| 138492-01 | Replacement panel-mount mounting pad. |
| 138493-01 | Replacement DIN-mount mounting pad. |
| 148722-01 | 3300 XL test plug. The 3300 XL Test Plug contains 3 small test pins attached to 3 color-coded 1-meter wires, each terminated in a banana plug. The 3-pin adapter plugs into the test pin holes on 3300 XL-style Proximitor sensors. You can use this test plug to check the performance of the Proximitor sensor from the test pin holes in the terminal strip without removing the field wiring. |
| 04310310 | 3300 XL Proximitor Sensor panelmount screw. One 6-32 UNC thread forming mounting screw. Four screws are required for each Proximitor sensor. (Screws supplied standard with Proximitor housings [3300 XL panel-mount option]). |
| 03200006 | Silicone self-fusing tape. A 9.1- meter (10-yard) roll of silicone tape to protect connectors. This tape is easy to install and provides excellent electrical isolation and protection from the environment. We do not recommend using this tape inside the casing of the machine. |
| 40113-02 | Connector Protector Kit. Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. |
| 136536-01 | Connector protector adapter. This allows you to use connector protector installation tools manufactured prior to 1998 with 75Ω ClickLoc connectors. |
| 40180-02 | Connector protectors. Package contains 10 pairs of connector protectors for 3300 XL 8 mm probes and extension cables. |
| 03839410 | 75Ω triaxial male connector protector. Male connector protectors install onto the extension cable and attach to the female connector protector on the probe, providing environmental protection of connectors. |
| 03839420 | 75Ω triaxial female connector protector. Female connector protectors install onto the probe lead and attach to the male connector protector on the extension cable, providing environmental protection of connectors. You can also place the connector protector onto the extension cable to slide over the connection to the Proximitor sensor to protect that connection from the environment. |
| 04301007 | 3/8-24 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 04301008 | M10 x 1 probe lock nut with safety wire holes. Single probe lock nut with 2 holes drilled through the nut in order to secure the lock nut in place with safety wire. |
| 330153-01 | 3300 XL connector kit. Used on 3300 XL 8 mm probes and extension cables. Contains 1 pair each of male and female ClickLoc connectors, 2 colorcoded sleeves, 2 pieces of slit FEP tubing, and 1 strip of silicone tape. |
| 330153-09 | 3300 XL ETR Connector Kit. Used on ETR 3300 XL 8mm probes and 3300 ETR XL extension cables. Contains one pair of male and female ClickLoc connectors, two color-coded sleeves, two pieces of high temperature slit FEP tubing, and one strip of silicon tape. |
| 163356 | Connector Crimp Tool Kit. Includes 1 set of multiconnector inserts and connector installation instructions. Compatible only with 330153 connector kits or with probes shipped in 2003 or later with ClickLoc connectors uninstalled. Supplied with carrying case. |
For the quick assistance message us on WhatsApp at 
