Basic Operator Panel BOP-2 for local operation and parameter access on compatible SINAMICS G120 drives.
Siemens 6SL3255-0AA00-4CA1 is the SINAMICS G120 Basic Operator Panel BOP-2. It provides a local operator interface for compatible G120 drive systems and is intended for commissioning, parameter access, status viewing and routine service interaction. Siemens currently identifies the exact article as Active Product. Official catalog data lists packaging dimensions of 130 × 80 × 45 mm and a net weight of 0.14 kg. Procurement should verify the complete suffix, installed control-unit family, supported firmware or project requirements and panel interface before ordering. A visually similar operator panel should not be assumed compatible without confirming the target SINAMICS configuration.
| Item | Status |
|---|---|
| Product Condition | Original new |
| Availability | In stock |
| Official Product Lifecycle | Active Product |
| Warranty | With 1 year warranty |
| Shipping | Worldwide shipping coordination |
Condition, availability and warranty are Stockoems commercial information and are not manufacturer commitments.
| Parameter | Officially Confirmed Value |
|---|---|
| Manufacturer | Siemens |
| Complete Part Number | 6SL3255-0AA00-4CA1 |
| Product Type | Basic Operator Panel BOP-2 |
| Product Family | SINAMICS G120 |
| Primary Function | Local drive operation and parameter access |
| Installation Context | Compatible SINAMICS G120 drive system |
| Packaging Dimensions | 130 × 80 × 45 mm |
| Net Weight | 0.14 kg |
| Official Product Lifecycle | Active Product |
| Product Class | Straightforward, can be reused over the short term |
Supports local parameter access during commissioning of compatible SINAMICS G120 drives.
Provides a local interface for routine drive operation and status review.
Assists service personnel with parameter and operating-state checks at the drive.
Provides an exact-suffix reference when replacing an installed BOP-2 operator panel.
Siemens currently identifies 6SL3255-0AA00-4CA1 as Active Product. Lifecycle wording applies only to this exact article.
It is the SINAMICS G120 Basic Operator Panel BOP-2.
It supports local drive operation, status review and parameter access on compatible G120 systems.
No. Siemens currently states the lifecycle as Active Product.
No. The target drive, control unit, firmware and operator-panel interface must be checked.
Confirm the exact suffix, drive family, control-unit generation, interface, project requirements and required quantity.
Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.
Structured verification, inspection, packaging and delivery coordination for Siemens 6SL3255-0AA00-4CA1 procurement.
Model and suffix verification, condition confirmation and product-label comparison before order processing.
Compatibility review for SINAMICS G120 drive family, control-unit generation, firmware requirements and operator-panel interface.
Product and label photo confirmation with visible-condition and hardware-completeness review when available.
Protective packaging, worldwide shipping coordination, shipment tracking and customs-document preparation.
| Control Point | Service Scope |
|---|---|
| Model and suffix verification | Checks the requested and manufacturer-formatted part numbers. |
| Condition confirmation | Documents the agreed commercial condition. |
| Technical compatibility review | Reviews system family, interfaces, revision and installation requirements. |
| Product and label photos | Supports identity and visible-condition checks. |
| Protective packaging | Uses handling suitable for industrial electronics and accessories. |
| Worldwide shipping | Coordinates available carrier and route options. |
| Shipment tracking | Provides dispatch and tracking information after shipment. |
| Customs documentation | Prepares available commercial shipment documents. |
| Written warranty terms | States the agreed Stockoems warranty coverage in writing. |
| Return authorization process | Requires documented review before an approved return. |
| After-sales response | Coordinates order, documentation and post-delivery questions. |
Request the complete part number, clear label photos, written condition, traceable quotation terms, compatibility questions, packaging details, warranty wording and a documented return-authorization process.
Compare the exact suffix, electrical ratings, interfaces, firmware or revision requirements, mounting, system family and official lifecycle. Similar appearance is not proof of compatibility.
Incomplete model numbers, reused photos, unverifiable labels, unsupported technical claims, pressure to order without compatibility review, vague warranty language and refusal to document return conditions are warning signs.
| SDV531-L33/PRP | L5508RVF | ABB Bio0007 2RCA026772A0001D / 2RCA026773D | APX 740 | AGC/GS/3 100053070.10 |
| 51305348-100 | FMI-100BU | PG9916 | NP44 3HD | RP128KCLPILA |
| 242100.000 | XBC-DN20SU | 920NTNNEK00000 | EC17Z | AM-200 |
| ABB MT70 GHQ6050059R0006 | G3780-822 2099A-G3SKMEM | MFM384-RC | WTS3B4BME/N | AB/S1.1 |
| EST140331 | ABB RXSF1 XR402616-A | SU/S 30.640.1 EIB | Kfd2-sr2-ex2.w 103368S | IGC2231 |
| 744-98065-00P HE06 | BA327C | SEM1700 | BZMB1-A100 | 6400-1106-03 Brd02944 |
| MIT300 | CP17970 | ABB 746271 | 3007A | DUS704W |
| ABB SDCS-APD-2 61268570A | IC694MDL916-CA | inBIO160 | 700283690 | 6197-0-0028 |
| ABB 500MDD01 1KGT034200R001 | TN1P4PA62A D8AW2 | 2CDG 110 046 R0011 | TC-9102-0222 | 54Y2537 |
| CP6533 | TVD100-PBA | ABB DA501 1SAP250700R0001 | Televes 7341 | PHCPS.9-5008W |
| X200-4G AC 1038568 | OCM-DPR-85-PD-ST-ACV | EY-IO571F001 | PLT200 | Alpha2 800-001-2000 |
| LCAD03VLNOD | 481-140 | DA2 RGBHV 60-488-01 | LPSR-2400 | ULFIM16AI-D37M-45-XOR-R2 |
| 574674 | MU-NKD005 / PN：51195153-005 | 9474 | 330100-50-05 | MR16OUT-S3 |
| ABB FCC/S 1.1.1.1 2CDG110210R0011 | CVS-9911MN | 76688 | 6101W | XF824A |
