Siemens 6SL3210-5BB12-5AV0 SINAMICS V20 Inverter

Siemens 6SL3210-5BB12-5AV0 filtered 0.25 kW single-phase drive

Inquiry now

Siemens 6SL3210-5BB12-5AV0 SINAMICS V20 Inverter

Filtered 0.25 kW compact drive for 200–240 V single-phase supplies, with USS and Modbus RTU communication.

Product Overview

Siemens 6SL3210-5BB12-5AV0 is a SINAMICS V20 compact inverter for controlling three-phase motors from a 200 to 240 V single-phase line supply. The exact filtered variant provides 0.25 kW rated output power, 1.70 A rated output current and an integrated Class A filter.

Its built-in operator interface, USS/Modbus RTU communication, configurable digital and analog I/O, convection cooling and FSA enclosure format support space-conscious control panels for pumps, fans, conveyors and general machinery. Procurement checks should always match the full order number, motor data, supply conditions and enclosure requirements.

Commercial Status

Manufacturer	Siemens
Complete Part Number	6SL3210-5BB12-5AV0
Product Family	SINAMICS V20
Accurate Product Type	Compact inverter / frequency converter
Official Lifecycle Wording	Not stated in the exact official Siemens datasheet reviewed; no lifecycle status is inferred.

Verified Technical Data

Parameter	Official Value for 6SL3210-5BB12-5AV0
Input phases	1 AC
Line voltage	200–240 V, -10% / +10%
Line frequency	47–63 Hz
Output phases	3 AC
Rated output voltage	230 V IEC / 240 V NEC
Rated power (LO / HO)	0.25 kW / 0.25 kW
Rated output current	1.70 A
Pulse frequency	8.00 kHz
Output frequency	0–550 Hz
Integrated filter	Class A
Communication	USS, Modbus RTU
Digital inputs	4 standard digital inputs
Digital outputs	1 relay changeover contact and 1 transistor output
Analog I/O	2 analog inputs; 1 analog output
Overload capability	LO: 110% for 60 s; HO: 150% for 60 s; 300 s cycle
Cooling	Convection cooling
Degree of protection	IP20 / UL open type
Frame size	FSA
Dimensions (W × H × D)	90.0 × 150.0 × 145.5 mm
Net weight	1.10 kg
Operating temperature	-10 to 60 °C; derating required at 40 °C or above
Maximum motor cable	10 m shielded; 50 m unshielded

Source basis: Siemens official datasheet for article number 6SL3210-5BB12-5AV0 and Siemens SINAMICS V20 operating instructions.

System Fit and Applications

Compact Motor Control

Suitable for small pumps, fans, conveyors and auxiliary machinery requiring adjustable speed from a 230 V-class supply.

Panel Integration

The FSA footprint, IP20 construction and convection cooling suit protected industrial control cabinets with verified ventilation.

Serial Communication

USS and Modbus RTU support coordinated control and diagnostics when the host interface and parameterization are confirmed.

Compatibility and Procurement Checks

Confirm the complete order number 6SL3210-5BB12-5AV0; do not substitute an unfiltered UV0 variant without engineering approval.
Verify 200–240 V single-phase input, motor voltage, 0.25 kW rating, 1.70 A output current and overload duty.
Check enclosure protection, mounting clearances, ambient derating and cable-length limits before installation.
Confirm USS/Modbus RTU network settings, I/O allocation and required commissioning parameters.
Request nameplate photographs and packaging labels when matching an installed drive or spare.

Lifecycle Note

The exact official Siemens datasheet reviewed identifies article number 6SL3210-5BB12-5AV0 but does not state a PLM lifecycle label. This page therefore does not classify the product as Active, Classic, Phase Out, Discontinued or any other lifecycle state. Current supply and any successor information should be verified against Siemens records at the time of procurement.

Frequently Asked Questions

What is Siemens 6SL3210-5BB12-5AV0?

It is a filtered SINAMICS V20 compact inverter rated at 0.25 kW for 200–240 V single-phase input and three-phase motor output.

Is this the filtered version?

Yes. The exact AV0 variant is listed with an integrated Class A filter. The UV0 order-number variant is different.

Which communication protocols are supported?

The official datasheet lists USS and Modbus RTU communication. Network parameters must match the host controller and commissioning design.

Can it replace another SINAMICS V20 automatically?

No. Confirm the full suffix, supply voltage, power rating, filter version, frame size, I/O needs and parameter set before replacement.

What should be checked before ordering?

Verify the complete part number, motor data, input supply, overload duty, enclosure conditions, cable lengths, communication settings and current Siemens lifecycle information.