Siemens 6GK7542-6UX00-0XE0 CP 1542SP-1 Communications Processor

Siemens 6GK7542-6UX00-0XE0 Industrial Ethernet Communication Module
Siemens 6GK7542-6UX00-0XE0 Industrial Ethernet Communication Module
Siemens 6GK7542-6UX00-0XE0 Industrial Ethernet Communication Module

Siemens 6GK7542-6UX00-0XE0 CP 1542SP-1 Communications Processor

Siemens 6GK7542-6UX00-0XE0 is the CP 1542SP-1 communications processor for connecting a SIMATIC S7 ET 200SP system to Industrial Ethernet. Siemens specifies open IE communication using TCP/IP, ISO-on-TCP and UDP, together with PG/OP communication, S7 routing, IP broadcast and multicast, SNMPv1, DHCP, email, IPv4/IPv6 support and NTP time synchronization. The module also enables access to the CPU web server. A suitable bus adapter is required. Selection should be checked against the installed ET 200SP CPU, network design and engineering project. Condition, availability and warranty shown here are Stockoems commercial terms only.

Original newIn stockActiveWith 1 year warranty

Product Data

Manufacturer Siemens
Complete Part Number 6GK7542-6UX00-0XE0
Product Type Communications processor
Series CP 1542SP-1
Product Family CP 1542SP-1
Official Life Cycle Active
System Connection SIMATIC S7 ET 200SP
Network Industrial Ethernet
Open Communication TCP/IP, ISO-on-TCP and UDP
Routing and Services PG/OP, S7 routing, SNMPv1, DHCP and email
IP Support IPv4 and IPv6
Time Synchronization NTP
Installation Requirement Bus adapter required
Net Weight 0.201 kg
Packaging Dimensions 62 × 110 × 24 mm
Commercial Terms Original new · In stock · With 1 year warranty
Shipping Worldwide
Country of Origin GERMANY

Power Conversion Path

ET 200SP System
Confirm the installed CPU and engineering environment.
CP 1542SP-1
Provide Industrial Ethernet communication and routing services.
Bus Adapter
Select the required physical network connection.
Industrial Ethernet
Connect approved devices and engineering stations.

Typical Applications

ET 200SP Ethernet connection
Links a compatible ET 200SP system to Industrial Ethernet.
Open TCP and UDP communication
Supports configured data exchange with approved network partners.
S7 routing
Provides routing for supported SIMATIC engineering and communication paths.
Network management
Supports SNMPv1, DHCP and NTP services within the designed network.
IPv4 and IPv6 projects
Supports network designs using either IP protocol version.

Compatibility and Revision Notice

Verify the complete suffix 6GK7542-6UX00-0XE0, the installed ET 200SP CPU, required bus adapter, firmware and engineering project, IP addressing, security settings and permitted communication services before ordering. Compare the product label and connector arrangement with the installed module.

Frequently Asked Questions

What is Siemens 6GK7542-6UX00-0XE0?

It is the CP 1542SP-1 communications processor for connecting a SIMATIC S7 ET 200SP system to Industrial Ethernet.

Which open communication protocols are supported?

Siemens lists TCP/IP, ISO-on-TCP and UDP for open IE communication.

Does it support S7 routing?

Yes. Siemens includes S7 routing among the module functions.

Is a bus adapter required?

Yes. Siemens states that a bus adapter is required.

Is 6GK7542-6UX00-0XE0 discontinued?

No. Siemens currently lists the complete product number as Active.

Request 6GK7542-6UX00-0XE0 Availability

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

Industrial Automation Procurement Service

Our workflow supports buyers and engineers from part-number review through shipment and after-sales communication. Each order is handled against the requested model, visible product identity and documented commercial terms without promising unverified quantities or delivery dates.

Inspection CoordinationIdentity, condition and label details are reviewed before dispatch arrangements.
Protective HandlingPackaging is selected to reduce shock, moisture and electrostatic risks in transit.
Shipping CollaborationLogistics, tracking and customs documents are coordinated for the destination.

Eleven-Point Service Gate

Model and suffix verificationThe complete part number is compared with the inquiry and visible product label.
Condition confirmationCommercial condition is stated in writing before order acceptance.
Technical compatibility reviewKnown electrical, mechanical and system requirements are checked with the buyer.
Product and label photo confirmationAvailable product and label photos can be reviewed for identity and revision details.
Protective packagingSuitable cushioning, moisture protection and handling controls are prepared.
Worldwide shippingShipping options are coordinated for the destination country.
Shipment trackingTracking details are supplied when the carrier makes them available.
Customs documentationCommercial shipping documents are prepared for the selected route.
Written warranty termsWarranty scope and period are recorded in the Stockoems quotation or order documents.
Return authorization processReturns require prior review and written authorization under the agreed terms.
After-sales responseOur team follows up on documented product, shipping and compatibility questions.

Supplier Qualification FAQ

How should an industrial automation supplier be qualified?

Ask for the complete legal company identity, traceable quotation, exact part number, clear commercial terms, product and label photos when available, written warranty terms and a documented return process. Engineers should also confirm that the supplier asks about system compatibility instead of assuming interchangeability.

What warning signs should procurement teams watch for?

Risk signals include altered suffixes, vague condition descriptions, unsupported technical claims, refusal to provide label evidence, unrealistic delivery promises, pressure to bypass written terms, and payment details that do not match the quoted company identity.

Why are label photos important for 6GK7542-6UX00-0XE0?

They help buyers compare the complete suffix, visible ratings and physical identity with the installed or specified unit before shipment.

Coordinate Your Procurement Check

Share the complete model, required quantity, destination and available equipment or label photos for a structured review.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

Stockoems Advantage Model Selection

IG6614 3AUA0000121424 VLC 16160 PH330i UC400,X13651492-02
PCO1AD0CS0 3718B004 SJ-201 178-930-2D DCU103 QY10
D-67722, MX-SM-D51-PW QUINT-UPS / 24DC / 24DC / 10 / 2320225 125-065-769 NP3X-D 500101/05
TVAC10100 67CFR-600 SST-1500-RCX-3-1-2 eWONx005CD eWON2005CD/MPI/PSTN 58-1000026-01
LS1330 M100-RTD ABB 6197/52-101-500 2832328 RFM96W
SB401-13 A160048-00 RDD810/NF S55770-T406 DVIVision-ARU-CON-RM A1120070 ABB NDCU-11
PLC-XF60 S711DR-EST1 IOP304 N3532TA-ADBE-M 2076-D6-350B-H
1321-3R25-B SQF-S25M8-128G-S8C 1794-ASB/B 96222271 ABB 2CDG110091R0011 DS-1003KI
ATI3D-00 DC374E 420 269 R1 LP-FX2021N-1 MBUS01P.431 LFC7510
ABB 3BSE023675R1 3BSE021445R1 RC87618222 AW-RC400L NFPW442 NFPW442-10 QSWS2-5BRLIRN-WH
1F83-0422 Infi90 IMDS002 773-10 10dB DC-9204 TTMJC30M100FTPC
SB-DN-D0403 NetAXS-123 NXD1-1 8013/22-02-43 MHFP014BSSW ABB 210000
017-529566 39M5411 UPC20 FG672 PM2230 LS2D-30-0001PR
RO-1350 22136444 GE IC200CPU002-JG 3RT2027-1AL20 PRO440 01-2-1-03-1-01
Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Looking for News & Events?
Contact Us #
+8618159889985

Our hours

Monday–Sunday: 8:30 AM–5:00 PM
(Eastern Time)

Home

Products

whatsApp

contact