Siemens 6GK1900-0AB10 C-PLUG Removable Data Storage Medium

Siemens 6GK1900-0AB10 C-PLUG Configuration Storage Unit
Siemens 6GK1900-0AB10 C-PLUG Configuration Storage Unit
Siemens 6GK1900-0AB10 C-PLUG Configuration Storage Unit
SIMATIC NET C-PLUG

Siemens 6GK1900-0AB10 C-PLUG Removable Data Storage Medium

A removable configuration storage medium for supported industrial networking devices.

Siemens 6GK1900-0AB10 is a C-PLUG removable data storage medium for compatible SIMATIC NET products equipped with a C-PLUG slot. It records configuration, engineering or application data to support device replacement following a fault. Compatibility is defined by the host device and its supported storage interface, not simply by the appearance of the plug. For procurement, provide the exact host model, installed revision and intended replacement arrangement. Stockoems can review the requested item, offered condition and destination before the order proceeds. Confirm the configuration-transfer procedure and required data handling with the responsible engineer before removing or installing the storage medium.

Condition
Original new
Availability
In stock
Warranty
With 1 year warranty

Condition, availability and warranty are Stockoems commercial terms and are not manufacturer commitments.

Key Product Information

Manufacturer Siemens
Complete Part Number 6GK1900-0AB10
Manufacturer Order Code 6GK1900-0AB10
Product Type C-PLUG Removable Data Storage Medium
System SIMATIC NET C-PLUG
Country of Origin GERMANY
Shipping Worldwide shipping coordinated after order review

Device Replacement Data Path

Host-device configuration
C-PLUG data recording
6GK1900-0AB10
Removable storage medium
Compatible replacement device

C-PLUG retains configuration, engineering or application data for supported SIMATIC NET devices with the appropriate slot. It supports a device-replacement workflow; it is not a general-purpose network switch or a controller. Siemens lists the official product lifecycle as Active.

Typical Applications

Network-device replacement
Supporting configuration transfer when a compatible device is replaced after a fault.
Configuration storage
Retaining supported host-device configuration or engineering data.
Application-data retention
Storing application data where this is supported by the host equipment.
Maintenance planning
Preparing a compatible replacement workflow and checking the host-device requirements.

Compatibility and Revision Notice

Verify the full identifier 6GK1900-0AB10, the exact host device, C-PLUG slot support, device revision and the documented data-transfer procedure before purchase. Do not assume that any removable storage device is compatible. Protect the existing configuration data and follow the host-device instructions during replacement.

Product FAQ

What is 6GK1900-0AB10?

It is the Siemens C-PLUG removable data storage medium for supported SIMATIC NET networking products.

What information can C-PLUG store?

It can record configuration, engineering and application data as supported by the host device.

Does it fit every industrial network device?

No. The equipment must have a compatible C-PLUG slot and support the intended use. Verify the exact host model before ordering.

What is its official lifecycle status?

Siemens lists the product lifecycle as Active. This status is separate from Stockoems condition, availability and warranty terms.

What should be checked before replacing a device?

Check the host model, revision, C-PLUG compatibility, stored data and manufacturer replacement procedure before removing or transferring the medium.

Request Availability and Compatibility Review

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

Procurement assurance

Industrial Automation Supply Support

Our service process connects part-number control, visual evidence, technical review, packing preparation and shipment documentation. Each step is designed to help end users, purchasing teams and engineers evaluate what is being offered before an order proceeds.

Eleven Procurement Quality Gates

01 · Model and suffix verification
The complete order code is checked character by character.
02 · Condition confirmation
The offered condition is stated clearly in the quotation and order record.
03 · Technical compatibility review
Known host-device model, C-PLUG slot support, revision and configuration-transfer requirements are reviewed with the buyer.
04 · Product and label photo confirmation
Available product and label images are compared with the requested identifier.
05 · Protective packaging
Equipment and accessories are protected against handling and international transit risks.
06 · Worldwide shipping
Shipping options are coordinated for the destination after the order requirements are known.
07 · Shipment tracking
Available tracking details are shared after dispatch.
08 · Customs documentation
Commercial shipment documents are prepared for the confirmed order and destination.
09 · Written warranty terms
Warranty scope and conditions are documented before order completion.
10 · Return authorization process
Any return request follows written authorization and review steps.
11 · After-sales response
Order records, supplied evidence and reported issues guide follow-up communication.

Inspection, Packing and Technical Coordination

Industrial automation specialist verifying a supplied module label
Label details and the supplied identifier are reviewed against the order record.
Quality inspector preparing protected industrial modules for packing
Condition evidence and protective packaging are coordinated for the confirmed unit.
Automation technician reviewing rack installation compatibility
Engineers can compare configuration, revision, interface and installation requirements before ordering.

How to Identify a Qualified Industrial Automation Supplier

What should a direct user verify first?

A qualified supplier should repeat the complete model and suffix, state the offered condition in writing, provide clear product and label evidence when available, and avoid replacing the requested part with a similar code without approval.

What should a purchasing professional request before placing an order?

Request a written quotation with the exact identifier, quantity, condition, warranty terms, shipping scope, return authorization procedure and seller contact details. The commercial documents should agree with the product evidence.

How can an engineer test supplier competence?

Ask configuration-specific questions about system configuration, mating hardware, interface type, revision and connection method. A responsible supplier distinguishes confirmed facts from assumptions and asks for missing system information.

Which warning signs deserve extra caution?

Risk signals include altered or unreadable labels, vague condition descriptions, refusal to provide order-specific evidence, pressure to accept a different suffix, unsupported compatibility claims, unclear return terms, inconsistent payment details and promises of unverified quantities or delivery dates.

Why does documentation matter after shipment?

Matched order records, packing evidence, tracking details, customs documents and written warranty terms give buyers a consistent basis for receiving inspection and after-sales communication.

Quality control
Model, label, condition and supplied evidence are checked in a documented sequence.
Logistics coordination
Packaging, carrier options, tracking and destination documents are aligned with the confirmed order.
After-sales communication
A named sales contact links the quotation, shipment record, written terms and reported issue.

Talk With Our Industrial Automation Team

Share the complete part number, required quantity, destination country and available label photos for a structured supply review.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

70
Exact Model Index

Stockoems Advantage Model Selection

AAI143-H53 2012R 2CDG 110 168 R0011 3A99162G0 SB-4
GMA121.1E MPM2400 PCI-E 8GB PX2810403-78-C R1N53 0R1N53 RAX510K IQ8QUAD
TVAC10100 QUINT4 025-40900-007 TRE 40-55L ULXS4 TA80DU-63
DT72 D454.F.CE NRFC212F010 72604R-TP / XF-1250 ADC8220/22
RM8I KNX 4940215 QFA2060D B&K 4001A 81545-01 BM828RII
150345 Ku-12.25-12.75 M2150-2DBC 7000-5376-1 152100 700-CF220ZS RTX40 416654 16-22A
5WG1512-1AB01 ZN1CL-kLIC-DI SSP81 VC7934ZZ11/U L24734-F655-A5
MR51e REX-C10 REX-C10FNC-M CTL-R2.2 S-70001 1-406584 VS00P10KNX
DS6878-TRBU0100ZWR QBE63-DP01 ABB CI592 / 1SAP221200R0001 CS31 METSEPM1200 026590 RS485
LBB1856/00 LBB1957/00 ADV551-32DO 51028365-1 175G9058 Sb-4bs-eu/Bg R1L-B
M-ME-C202.32 RXV-35-4K MH5000BLKC 2cdg510004R0011 FVS318AU
1771-P6S/B C75825A A4-F8C El-805u-d-868-500m FG1010-320-BL DX-TX-WP-BL
ABB 1SVR730020R0200 Q100 PP056TB1-113 NS-ATA7003 CM-LBPS900
GE RMS7 RMS79025110 EZ512-DC-RC/ EZ512-DC-RC-2 TT-MJC-7M/25FT-PC BZMC1-A80-BT GE 430223001 / T-200

Request a Model Check

Send the complete manufacturer, model, suffix and required quantity so our team can verify the requested listing and supply details.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Looking for News & Events?
Contact Us #
+8618159889985

Our hours

Monday–Sunday: 8:30 AM–5:00 PM
(Eastern Time)

Home

Products

whatsApp

contact