Siemens 6ES7551-1AB00-0AB0 SIMATIC S7-1500 TM PosInput 2 Counter and Position Detection Module

Siemens 6ES7551-1AB00-0AB0 TM PosInput 2 technology module
Siemens 6ES7551-1AB00-0AB0 TM PosInput 2 technology module
Siemens 6ES7551-1AB00-0AB0 TM PosInput 2 technology module
SIMATIC S7-1500 TECHNOLOGY MODULE

6ES7551-1AB00-0AB0

TM PosInput 2 counter and position detection module for incremental and SSI encoder signals.

Core configuration
2
independent measurement channels
Encoder interfaces
RS-422 / SSI
Load supply
24 V DC
Firmware
V1.3
Mounting width
35 mm
01

What This Module Does

Siemens 6ES7551-1AB00-0AB0 is a SIMATIC S7-1500 TM PosInput 2 technology module for counter and position detection tasks. Its two channels accept RS-422 incremental encoders or SSI absolute encoders, while each channel provides two digital inputs and two digital outputs for signal-related control functions. The module supports isochronous operation and mounts on an S7-1500 mounting rail. It suits maintenance, expansion and controlled replacement work where an existing automation project requires this complete article number. Before ordering, compare the suffix, firmware level, encoder type, supply arrangement, wiring, mechanical space and STEP 7 project requirements.

02

Signal Path

Encoder
RS-422 incremental or SSI absolute signal
Channel input
Independent acquisition on channel 1 or 2
TM PosInput 2
Counting and position processing
S7-1500 project
Cyclic or isochronous automation use
03

Channel Configuration Map

Channel
Encoder choice
Local I/O structure
Channel 1
RS-422 incremental or SSI absolute
2 digital inputs + 2 digital outputs
Channel 2
RS-422 incremental or SSI absolute
2 digital inputs + 2 digital outputs
04

Verified Data Matrix

Identity and lifecycle
Manufacturer Siemens
Complete Part Number 6ES7551-1AB00-0AB0
Product Type Counter and position detection technology module
Series / Designation SIMATIC S7-1500 / TM PosInput 2
Article Status Siemens spare-part article
Electrical and functional data
Channels 2
Firmware V1.3; firmware update possible
Isochronous Mode Yes
Rated Load Supply 24 V DC; permitted range 19.2 to 28.8 V DC
Current Consumption Maximum 75 mA without load
Encoder Supplies One 5 V and one 24 V encoder supply per channel
Backplane Bus Power 1.3 W available
Typical Power Loss 5.5 W
Mechanical and commercial data
Dimensions 35 × 147 × 129 mm (W × H × D)
Approximate Weight 325 g
Mounting S7-1500 mounting rail
Product Condition NEW
Country of Origin GERMANY
Warranty With 1 year warranty
Shipping Worldwide shipping options are confirmed in the written quotation.
05

Commissioning Timeline

Match

Compare the complete suffix and installed label.

Map

Document both encoders and channel I/O.

Configure

Review firmware and STEP 7 project settings.

Install

Check rail, power, shielding and connectors.

Validate

Test each channel before production release.

Practical Applications

  • Two-channel pulse counting.
  • SSI absolute position acquisition.
  • S7-1500 machine positioning tasks.
  • Isochronous measurement functions.
  • Controlled maintenance replacement.

Compatibility Gate

Confirm the full suffix, encoder system, channel assignments, 24 V DC supply, connectors, shielding, firmware, STEP 7 version, mounting dimensions and original label photographs.

Siemens lists 6ES7551-1AB01-0AB0 as a later article. It requires an engineering review and is not presented as an automatic direct replacement.

Model-Specific FAQ

What is the primary function of 6ES7551-1AB00-0AB0?

It provides two-channel counting and position detection with RS-422 incremental or SSI absolute encoders.

How many local digital signals are available?

Each channel has two digital inputs and two digital outputs.

Which firmware is specified?

The official technical data lists firmware V1.3 and supports firmware updating.

Why must the suffix be checked?

The suffix identifies the exact article. Match every character with the installed label and project records.

Is the later Siemens article automatically interchangeable?

No. Project configuration, firmware, encoder interfaces, wiring and application requirements must be reviewed first.

How are shipping arrangements confirmed?

The available international route and shipment terms are stated in the written quotation.

NEW condition, GERMANY origin and the stated warranty are commercial information confirmed by the seller and are not presented as manufacturer commitments.

Stockoems is operated by Apter Power Limited and is an independent reseller of industrial automation products. Manufacturer names and trademarks are used for identification purposes only.

RFQ

Request a Quotation

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

SERVICE WORKFLOW

From Model Check to After-Sales Response

Four documented phases organize technical review, packing, shipping and post-delivery support.

4
service phases
1

Verify the Requirement

Model and suffix verification
Compare the requested number with label information.
Condition confirmation
Record the offered condition in writing.
Technical compatibility review
Review supplied project, encoder and wiring details.
Product and label photo confirmation
Check available images against the purchase requirement.
2

Prepare the Shipment

Protective packaging
Protect the module, housing and terminals.
Customs documentation
Prepare transaction documents for the agreed route.
Written warranty terms
State scope and claim conditions in writing.
3

Dispatch and Track

Worldwide shipping
Evaluate available routes for the destination.
Shipment tracking
Provide tracking details when supported by the carrier.
4

Support After Delivery

Return authorization process
Handle returns through prior authorization and written terms.
After-sales response
Review documented product, shipment and warranty questions.

Start the Service Review

Send the complete model, quantity, destination and product label photographs. Availability and timing are confirmed only in the written quotation.

70 MODELS • 5 COLUMNS • 14 ROWS

Stockoems Advantage Model Selection

Randomized from the customer-provided TXT files and checked individually through the Stockoems front search.

TXT source
Every entry is taken from the supplied lists.
Exact search
Each complete model was checked on Stockoems.
Link rule
Only an exact published match receives a link.
PublishedExact matching Stockoems pagePlain textNo exact published match located

Each entry is an independent product listing and is not presented as a direct replacement. Confirm the manufacturer, complete part number, revision and compatibility before ordering.

MN-COM1S XD26 MILLENIUM3 88974163 QAE2120.010 AR-JS2 AR14803 DG-11 DGC11-3PK-6500T 1-702-026
KNA3 XS 85100036 EASY-E4-AC-12RC-1 80025-678-01-R NUM-ACT08 AVP101
1P00000G01 13QAO 25B-D4P0N104 TP-0416 TS16 CQM1H-CPU21& PD026& ID212& IPS01&AD041&B7A21
Z031.408 Z031.408/01 AT-RON-448 4K/HDR ABB 251 204-AN 325-A2A1A
ADV151-P50Published
821-DC-TCX CF5000,6061CF5000 7000-5201-1 DRCDD-0L0 261004
CR-CTC T201502 ALGA3250 / 3P2FC / 10 IP500 700503164 TA80DU-63
NP04ZL Safety-MS2 ABB 3BSE021443R1 TU843 22-HIM-A3 GE UR6CH
AVPLY-R9200 P9XPNVG 185002 HI6100405 A4-F8C LD28-F1-3974/76a/112
571125022 I3J2L-0000 PS-24V-1.5A TR10 AG-5311 ARU2-CPU-RM A1110135 2C12790G49
PN 301508 IM5019 IME3020-FPKG 125-065-769 2CDG110162R0011 WGEN02KPI
RMT/2 RMT2#A5LL000 KFD2-STC4-EX1 C62371 C62372 15B10851G1 BRX-8146 90Y4608
ABB 1SVR450055R0000 X13760335-01 EX-9520 MP2HI3HCGL CX1001-0011
Trio-PS-2G/1Ac/24DC/10 751366 220-751366-401 REV.6 V24217-B3000-A100 MTL 4841 9001/01-280-100-10
CS14PR-SX-24VDC JBS-100-EP MNN-62-100 SEC-TEA-230-5045 HSN4032B
1. Select

Provide the exact required model and quantity.

2. Verify

Compare labels, revision and application requirements.

3. Quote

Confirm condition, destination and shipping terms in writing.

Request Model Availability

Send the complete model, required quantity and destination. Our team will verify listing details, condition and shipping options before quotation.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Looking for News & Events?
Contact Us #
+8618159889985

Our hours

Monday–Sunday: 8:30 AM–5:00 PM
(Eastern Time)

Home

Products

whatsApp

contact