Siemens 6ES7193-6BP20-0BB1 ET 200SP BaseUnit

Siemens 6ES7193-6BP20-0BB1 BU20-P12+A0+4B Push-In Base Unit
Siemens 6ES7193-6BP20-0BB1 BU20-P12+A0+4B Push-In Base Unit
Siemens 6ES7193-6BP20-0BB1 BU20-P12+A0+4B Push-In Base Unit

Siemens 6ES7193-6BP20-0BB1 ET 200SP BaseUnit

Type B1 ET 200SP BaseUnit with push-in terminals and left-side bridging.

Product Overview

The Siemens 6ES7193-6BP20-0BB1 is a SIMATIC ET 200SP BaseUnit designated BU20-P12+A0+4B. Siemens identifies it as BaseUnit type B1 with push-in terminals, without auxiliary terminals, and bridged to the left. The unit is 20 mm wide and 117 mm high and serves as the mechanical and electrical base for a compatible ET 200SP module position. The exact BaseUnit coding affects station assembly, potential-group continuity and module fit. Before ordering, compare the full article number, BU type, terminal arrangement, left-side bridging, adjacent BaseUnits and the intended electronic module in the station layout.

Commercial Status

Item Stockoems Information
Product Condition Original new
Availability In stock
Warranty With 1 year warranty

Condition, availability and warranty are Stockoems commercial terms and are not manufacturer commitments.

Verified Technical Data

Parameter Verified Value
Manufacturer Siemens
Complete Part Number 6ES7193-6BP20-0BB1
Product Type SIMATIC ET 200SP BaseUnit
Product Designation BU20-P12+A0+4B
BaseUnit Type B1
Terminal Technology Push-in terminals
Auxiliary Terminals Without auxiliary terminals
Potential Group Connection Bridged to the left
Width × Height 20 mm × 117 mm
Packaging Unit 1
Net Weight 0.057 kg
Official Lifecycle PM300: Active Product

Operating Architecture

Module Position

The BaseUnit provides the station position for a compatible ET 200SP electronic module.

Terminal Path

Push-in terminals support field wiring while the documented left-side bridging continues the intended potential group.

Station Assembly

BU type, adjacent BaseUnits and the electronic module must be coordinated in the ET 200SP configuration.

Product Photo Evidence

For order review, provide clear photographs of the full BaseUnit, terminal markings, side coding and the complete Siemens label. Confirm that 6ES7193-6BP20-0BB1 and BU20-P12+A0+4B are fully visible.

System Fit and Applications

  • ET 200SP distributed I/O station assembly
  • Control-panel field wiring with push-in terminals
  • Maintenance replacement of a matching type B1 BaseUnit
  • Potential-group continuation through left-side bridging
  • Machine I/O expansion using the documented 20 mm base position

Compatibility and Procurement Checks

  1. Match the complete order number 6ES7193-6BP20-0BB1.
  2. Verify BaseUnit type B1 and designation BU20-P12+A0+4B.
  3. Confirm that left-side bridging matches the station potential-group plan.
  4. Check the absence of auxiliary terminals against the wiring design.
  5. Compare the intended electronic module, adjacent BaseUnits and terminal layout before assembly.

Frequently Asked Questions

What is the Siemens designation for 6ES7193-6BP20-0BB1?

Siemens designates this BaseUnit as BU20-P12+A0+4B.

Which BaseUnit type is it?

The exact article number is identified as BaseUnit type B1.

What terminal technology is used?

The unit uses push-in terminals.

Is the BaseUnit bridged to the left?

Yes. Siemens states that this version is bridged to the left and has no auxiliary terminals.

What is the official lifecycle status?

Siemens Industry Mall lists 6ES7193-6BP20-0BB1 as PM300: Active Product.

Request a Product Check

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

Stockoems Industrial Automation Service

Structured order review for Siemens 6ES7193-6BP20-0BB1, from model verification through documented after-sales communication.

Inspection, Warehouse and Technical Collaboration

Stockoems technicians inspecting industrial automation equipment
Product condition and visible component inspection
Warehouse staff verifying industrial automation package labels
Package label verification and warehouse handling
Automation engineers reviewing technical compatibility at workstation
Technical compatibility review and order coordination

Order Verification Workflow

Stage Service Check Purpose
1 Model and suffix verification Compare the complete Siemens article number and every suffix character.
2 Condition confirmation Confirm the quoted condition and visible product state.
3 Technical compatibility review Review BaseUnit type, terminal arrangement, left-side bridging, adjacent units and electronic-module fit.
4 Product and label photo confirmation Use clear visual evidence before shipment approval.
5 Protective packaging Protect terminals, controls and enclosure surfaces for transit.
6 Worldwide shipping / Shipment tracking Coordinate the selected route and provide shipment tracking after dispatch.
7 Customs documentation Prepare shipment documents according to the confirmed order and destination.
8 Written warranty terms Record the applicable Stockoems warranty terms with the transaction.
9 Return authorization process Review evidence and provide an authorization path when a return is eligible.
10 After-sales response Maintain traceable communication for order and product questions.

Quality, Packing and Documentation

Inspection

The order review checks the visible model, suffix, label markings, terminals or interfaces, and general product condition.

Packing

Protective materials are selected to reduce movement and shield vulnerable controls and terminals.

Logistics

Shipment coordination covers routing, tracking and the confirmed destination requirements without promising an unverified delivery date.

After-Sales

Written records support warranty questions, return review and responsive post-delivery communication.

Supplier Qualification FAQ

How should end users, buyers and engineers identify a qualified industrial automation supplier?

Ask the supplier to preserve the complete manufacturer code, provide clear product and label photos, state condition and warranty terms in writing, and explain how compatibility is reviewed. A qualified supplier should separate manufacturer facts from its own commercial terms, keep order communication traceable, describe packing and logistics procedures, and provide a defined return authorization process.

What are common warning signs?

Risk signals include missing suffixes, specifications copied from a similar model, unclear condition, refusal to provide label evidence, unsupported lifecycle claims, vague warranty language, pressure to pay before identity checks, and promises of exact stock quantities or delivery dates without verification.

Coordinate Your Order

Share the complete code, quantity, destination and clear label photographs for a structured commercial and compatibility review.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

Stockoems Advantage Model Selection

Allen Bradley 1734-IE2C+OB4+IB8 GICM-20105T P01120921 8/24-0, 5 203000001 IR425 / ir425-D4-2
ABB DI88 3BSE028586R1 3BSE020850R1 3HE15377AARA01 SFP28 FGV-100XY 010130 BUS-2/ BUS-1 aP Wago 750-323
4574821 MI-DCMOE 2CDG110055R0011 FTD110DBMicro-SST 007300300
MTL4513 R765043-08 / frg337903 / R782334 M0257 RK-300 DNS - D606MW
13985-301 FLOE000010 PGM-2602 M032-4111-200 D1082DMDAF2, 16089412.SGDM 1SVR730824R9300
DA2 RGBHV 60-488-01 SMI472-12 YC-1SDA038301R1 VX4A661 450-9016
1381V PL-1381-11-V ABB YSI01-W 2TMA010020W00001 TK-485/EU 077-05FA-LSSN-C6 140734-01 3500/40M
NP3X-D MID2E-800 DX80DR2MH ABB 1SAP250600R0001 1SAP212200R0101 60-1471-12
SPS-3.3EACI8C VAVIH-SD ABB 746947 GE IC660BBD025 M0100A 116/323
PS-22-0 T8424D1016 FLM-420-O1I 1-D 26348 3RW4036-1BB14
F0.95 450-00019-004 PC4416 CDC-623 H-7PCRDIO73B GMA121.1E 60-541-61
CO2 QBM30201U ILR3 TC908A1000 CEN-NVS100
THQC22020WL 2938730 IC200CPUE05-MX 773-10 176F9170
XP-3160 5502DAL DF5-BKT DF5 DMC202T FD2A02TR-RN20

Models were randomly selected from the customer-provided TXT lists. Only exact Stockoems product matches are linked; unlinked entries remain plain text.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Looking for News & Events?
Contact Us #
+8618159889985

Our hours

Monday–Sunday: 8:30 AM–5:00 PM
(Eastern Time)

Home

Products

whatsApp

contact