Siemens 6ES7151-1CA00-0AB0 IM 151-1 Basic Interface Module

Inquiry now

SIMATIC DP • ET 200S • IM 151-1 BASIC

Siemens 6ES7151-1CA00-0AB0 IM 151-1 Basic Interface Module

PROFIBUS DP interface module for compact ET 200S distributed I/O stations.

Original new
Stockoems commercial condition

In stock
Availability subject to written quotation

Product cancellation since 2020-10-01
Official lifecycle wording

With 1 year warranty
Stockoems written warranty

Short Product Summary

Siemens 6ES7151-1CA00-0AB0 is a SIMATIC DP IM 151-1 Basic interface module for ET 200S. The official manual specifies PROFIBUS DP through an RS485 interface, transmission rates from 9.6 kbaud to 12 Mbit/s, 88 bytes of I/O address space and operation with a maximum of 12 power, electronic or motor starter modules; fail-safe modules are not supported. Bus connection uses a 9-pin D-sub, and a termination module is included. Siemens lists the exact article as Product cancellation since October 1, 2020. Buyers should verify the suffix, station configuration, supported modules, bus parameters, connector and termination before replacement.

Key Product Information

Item	Confirmed information
Manufacturer	Siemens
Complete Part Number	6ES7151-1CA00-0AB0
Product Type	IM 151-1 Basic interface module
Series	SIMATIC ET 200S
Official Life Cycle	Product cancellation since 2020-10-01
Bus Protocol	PROFIBUS DP
Interface	RS485
Transmission Rate	9.6 kbaud to 12 Mbit/s
I/O Address Space	88 bytes
Supported Modules	Maximum 12; no fail-safe modules
Bus Connector	9-pin D-sub
Included Component	Termination module
Width	45 mm
Product Condition	Original new
Availability	In stock
Warranty	With 1 year warranty
Shipping	Worldwide options reviewed after order verification

Condition, availability and warranty are Stockoems commercial information. The life-cycle wording above follows the current Siemens listing for this exact article.

Integrated Interface Topology

PROFIBUS DP

RS485 communication up to 12 Mbit/s

IM 151-1 BASIC

ET 200S station interface

LOCAL I/O

Up to 12 supported modules

TERMINATION

Included termination module

Typical Applications

ET 200S distributed I/O stations

PROFIBUS DP machine networks

Compact remote I/O expansion

Legacy station replacement projects

Maintenance of validated ET 200S systems

Compatibility and Revision Notice

Match the complete part number and suffix. Before ordering, review the installed ET 200S station, PROFIBUS address and baud rate, module count, power modules, 9-pin D-sub connector, termination, project configuration and the restriction that fail-safe modules are not supported.

Product FAQ

What is 6ES7151-1CA00-0AB0?

It is a Siemens SIMATIC DP IM 151-1 Basic interface module for ET 200S distributed I/O.

Which bus does the module use?

It uses PROFIBUS DP through an RS485 interface with supported transmission rates up to 12 Mbit/s.

How many ET 200S modules can be connected?

The official documentation specifies a maximum of 12 power, electronic or motor starter modules; fail-safe modules are not supported.

What is the official life-cycle status?

Siemens lists the exact article as Product cancellation since October 1, 2020. This wording is retained without substituting another status.

What should be checked before replacement?

Confirm the suffix, station configuration, PROFIBUS parameters, connector, termination, module count and supported module types.

Request Availability and Compatibility Review

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com | WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

VERIFICATION • HANDLING • GLOBAL DELIVERY

Industrial Automation Supply Assurance

A documented service route for model identity, condition evidence, technical review, protective handling and after-sales communication.

GATE 01

Identity and Condition

Model and suffix verification, condition confirmation, and product and label photo confirmation are completed before dispatch planning.

GATE 02

Technical Review

Technical compatibility review covers the complete code, revision, installed environment and information supplied by the buyer.

GATE 03

Protection and Logistics

Protective packaging, worldwide shipping, shipment tracking and customs documentation are coordinated for the confirmed destination.

GATE 04

Written Support

Written warranty terms, the return authorization process and after-sales response channels support a clear procurement record.

Evidence Before Shipment

Industrial automation team reviewing product labels and order details

Label, suffix and supplied product evidence are checked against the order record.

Protective packaging preparation for industrial control equipment

Packaging is selected to protect the unit and accessories during international transport.

Logistics specialist coordinating tracked worldwide shipment

Tracking, destination details and customs documents are coordinated before shipment.

Service Route

1. Verify
Complete model, suffix, revision and label evidence

2. Review
Condition and technical compatibility requirements

3. Protect
Product handling, packing and accessory control

4. Coordinate
Worldwide shipment, tracking and documentation

5. Support
Written warranty, return authorization and response

Supplier Qualification FAQ

Practical checks for direct users, procurement teams and engineers evaluating industrial automation suppliers.

What evidence should a qualified supplier provide?

Request clear product and label photos, the complete part number and suffix, condition confirmation, a written quotation, stated warranty terms, packaging details and an identifiable after-sales contact. Evidence should match the unit offered, not a generic catalog image.

How should procurement teams compare quotations?

Compare the exact code, condition, revision, included accessories, warranty scope, return process, shipping terms and documentation. A low price is not equivalent to the same technical and commercial scope.

What should engineers verify before approving a supplier?

Engineers should confirm that the supplier understands the full suffix, firmware or hardware revision, software project, safety requirements, communication interfaces, terminal or base needs and installed-system constraints.

Which warning signs indicate elevated risk?

Risk signals include refusal to provide current unit photos, an incomplete model, inconsistent labels, unexplained stock claims, pressure for immediate payment, vague warranty language, missing return authorization terms and unwillingness to document shipping responsibility.

How can direct users reduce replacement risk?

Share the existing label, complete part number, project context and connector or terminal requirements. Keep the supplier quotation, photo evidence, compatibility discussion, shipping record and warranty terms together for approval and later support.

Discuss Your Service Requirements

No unconfirmed delivery time or specific inventory quantity is promised. Please provide the complete model, quantity, destination and available label photos for review.

Email: sales6@apterpower.com | WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

Stockoems Advantage Model Selection

U1174A	2860785	KFD2-EB.R2A.B	X20PS3300	PDI-30RK1000
SIGA2-PS	ACE100	TE-6300W-110	TMYBEHRP0100B	MTL4546C
DJH-20AC-R	QMX3.P44-1BSC	M3200-010210-07604	HS2032NKCE	PGD0000W00
JUD306163	Fu5210	330103-00-04-10-02-05	NP3X-D	IP-960
H4W4PER3V	330105-02-12-10-02-05	ECM-77BC	BZMB1-A100	60-692-21
300E	CPO-FBA-4A	E50H5A	LRD3355	6ES7972-0CB35-0XA0
254-758-000-104s	559-3800	0100AEP0N	9192/32-10-10	DT70-F002E
TDG-BR250	DP255.501	160EET	TSXP57202	HDL-MC64-DALI.431
140CPS11100	STEP-PS/1AC/24DC/2.5	CAN-16DO	LV434010	6AG1321-1BL00-2AA0
AKB331-M020	S3-S-VAD-HPR-R	50080121-001	FC-IO-0001	ME96SSE-MB
SPB-00154	HD-TX-301-CE	GE57705X012	LNL-1100	4010
PS-22-0	55238-00	SCB-5003P	TVG430	2-QUADRANT
1011300000	X5PRFAN4	330172-00-25-05-01-05	M88251-001	EL6001
AA50	A63p	1791DS-IB12	PDITE-SMRTVUE-01	TNM3410

Models were randomly selected from the customer-provided TXT lists. Only exact Stockoems product matches are linked; unlinked entries remain plain text.