Siemens 6ES7138-6AA01-0BA0 SIMATIC ET 200SP TM Count 1x24V Counter Module

Siemens 6ES7138-6AA01-0BA0 TM Count 1x24V Module

Inquiry now

Siemens · SIMATIC ET 200SP

6ES7138-6AA01-0BA0 TM Count 1x24V counter module

Documented technical facts, compatibility checkpoints, and procurement guidance for this exact Siemens article number.

Product Summary

Siemens 6ES7138-6AA01-0BA0 is a SIMATIC ET 200SP TM Count 1x24V technology module for high-speed counting with a 24 V incremental encoder or pulse encoder. Siemens specifies one counter channel, three digital inputs, two digital outputs, and use with BaseUnit type A0. The module supports documented position, pulse, frequency, and event-counting tasks within an approved ET 200SP configuration. It is suited to machine maintenance, station rebuilding, and replacement planning. Before ordering, verify the complete suffix, encoder type and signal level, BaseUnit, channel wiring, digital I/O assignment, engineering project, and original equipment label.

Exact model profile

Key Product Information

Identity & Commercial Terms
Manufacturer	Siemens
Complete Part Number	6ES7138-6AA01-0BA0
Product Type	TM Count 1x24V counter module
Series	SIMATIC ET 200SP
Product Condition	NEW
Country of Origin	GERMANY
Warranty	With 1 year warranty
Official Technical Data
Product Family	TM Count 1x24V counter module
Counter Channels	1 channel
Encoder Interface	24 V incremental encoder or pulse encoder
Digital Inputs	3
Digital Outputs	2
Suitable BaseUnit	BU type A0
Approximate Net Weight	49 g

Counting and Signal Architecture

Define the complete counting path before replacement: encoder type, 24 V signal level, pulse direction, gate and control inputs, output actions, counter limits, scaling, diagnostics, and process behavior. The installed project and wiring documentation must remain the governing configuration.

Four-Stage Work Route

Capture
Photograph the module label and record encoder wiring, digital I/O use, BaseUnit, and configured counting mode.

Verify
Compare signal levels, pulse characteristics, gate and control functions, output reactions, and station parameters.

Install
Isolate field power, observe ESD procedures, confirm BU type A0, and reproduce the validated terminal assignment.

Test
Check counting direction, scaling, frequency or period values, digital inputs, output actions, diagnostics, and machine interlocks.

Typical Applications

Pulse countingCounts documented 24 V pulses in machine and process sequences.

Incremental encoder acquisitionConnects a compatible 24 V incremental encoder within an ET 200SP station.

Frequency and period measurementSupports configured time-based evaluation where provided by the approved project.

Maintenance replacementRestores an existing counting channel after suffix, wiring, and parameter verification.

Compatibility and Revision Gate

Match the complete article number and suffix: 6ES7138-6AA01-0BA0.
Confirm the encoder is a compatible 24 V incremental or pulse encoder.
Verify BU type A0, station slot, terminal assignment, and field-power grouping.
Compare the three digital-input and two digital-output functions with the approved project.
Retain the configured counting mode, limits, scaling, gate logic, and diagnostic behavior.
Provide the original module label, terminal photos, and encoder details for a supply review.

Frequently Asked Questions

What is 6ES7138-6AA01-0BA0?
It is a Siemens ET 200SP TM Count 1x24V technology module with one counting channel.

Which encoder signals are identified?
Siemens specifies use with a 24 V incremental encoder or pulse encoder.

How many digital channels are integrated?
The official product description identifies three digital inputs and two digital outputs.

Which BaseUnit is required?
Siemens specifies suitability for ET 200SP BaseUnit type A0.

How can replacement compatibility be confirmed?
Compare the complete suffix, encoder, BaseUnit, wiring, digital I/O assignment, station project, and configured counting functions.

What condition and warranty apply?
This listing is offered as NEW with 1 year warranty under the written quotation and order terms.

Browse PLC Products · Contact Us

Stockoems is operated by Apter Power Limited and is an independent reseller of industrial automation products. Manufacturer names and trademarks are used for identification purposes only.

Request a Supply and Compatibility Check

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

APTER POWER LIMITED

Industrial Spare-Parts Service Workflow

Documented model verification, technical review, protective handling, international shipping coordination, and after-sales support for 6ES7138-6AA01-0BA0 procurement.

Stockoems is operated by Apter Power Limited and is an independent reseller of industrial automation products. Manufacturer names and trademarks are used for identification purposes only.

Our service approach is built around traceable article-number checks, written commercial terms, current product and label photo confirmation, appropriate packaging, and responsive order communication. Availability and delivery timing are confirmed only in the written quotation.

Apter Power engineer verifying industrial automation product labels — Engineer-led product and label verification before quotation and dispatch.

Apter Power team inspecting an industrial control system — Control-system inspection and technical documentation review for replacement planning.

Verification and Order Support

Model and suffix verificationWe compare the requested complete part number with the supplied label, quotation, and order record.

Condition confirmationNEW condition is stated in writing and can be supported by current overview and label photos.

Technical compatibility reviewWe collect CPU status, firmware, TIA Portal version, memory card, project, and network details for review.

Photo confirmationProduct and label photos can be checked before shipment when included in the confirmed order process.

Multi-brand sourcing supportRequests for related PLC, DCS, HMI, drive, power, and industrial control components can be consolidated for review.

After-sales responseOrder records and technical evidence are reviewed when customers request support after delivery.

Packaging and Worldwide Shipping Route

1ProtectPackaging is selected to reduce handling movement, impact, moisture, and electrostatic exposure.

2DocumentCommercial and customs documentation is prepared according to the confirmed order and destination.

3DispatchAvailable worldwide shipping routes and service levels are confirmed before dispatch.

4TrackShipment tracking details are shared when provided by the selected carrier.

Warranty, Returns and After-Sales

Warranty: With 1 year warranty under the written quotation and order terms.
Written warranty terms identify the covered product, duration, and applicable process.
Return requests require authorization before shipment back to the designated location.
Provide the order number, complete model, photos, labels, and fault description when requesting support.
After-sales response is coordinated through the confirmed sales contact and documented order record.

Request Service Support

Send the complete part number, quantity, destination country, required condition, original product label photos, and relevant engineering information.

Email: sales6@apterpower.com WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

Stockoems Advantage Model Selection

Each entry is an independent product listing and is not presented as a direct replacement. Confirm the manufacturer, complete part number, revision and compatibility before ordering.

6ES7521-1BL00-0AB0	6ES7522-1BL01-0AB0	6ES7532-5NB00-0AB0	6ES7131-1BL01-0XB0	6ES7131-6BF00-0DA0
6ES7134-6HD00-0BA1	6ES7138-4FA02-0AB0	6ES7141-6BF00-0AB00	6ES7153-2BA02-0XB0	6ES7157-0AA82-0XA0
6ES7195-7HB00-0XA0	6ES7195-7HD80-0XA0	6ES7195-7KF00-0XA0	6ES7197-1LB00-0XA0	6ES7212-1AD30-0XB0
6ES7214-1AD22-0XB0	6ES7214-1AG40-0XB0	6ES7221-1BF32-0XB0	6ES7221-1BH32-0XB0	6ES7222-1BF32-0XB0
6ES7231-4HD30-0XB0	6ES7231-4HF32-0XB0	6ES7232-4HB32-0XB0	6ES7241-1CH30-0XB0	6ES7307-1EA01-0AA0
6ES7321-1BH02-0AA0	6ES7322-1BL00-0AA0	6ES7322-8BH01-0AB0	6ES7323-1BL00-0AA0	6ES7326-1BK01-0AB0
6ES7326-1BK02-0AB0	6ES7331-7NF00-0AB0	6ES7350-1AH03-0AE0	6ES7360-3AA01-0AA0	6ES7392-1AM00-0AA0
6ES7403-1JA01-0AA0	6ES7421-7BH01-0AB0	6ES7422-1HH00-0AA0	6ES7422-7BL00-0AB0	6ES7431-0HH00-0AB0
6ES7431-1KF10-0AB0	6ES7648-6AA03-5YA0	6ES7648-6CA05-0YX0	6ES7650-1AH61-5XX0	6ES7650-1AL11-6XX0
6ES7650-1BD51-0XX0	6ES7658-1GX08-2YT7	6ES7972-0BA12-0XA0	6ES7972-0BA52-0XA0	6ES7972-0BB12-0XA0
6ES7972-0CB35-0XA0	6ES7972-0DA00-0AA0	6ES5375-1LA41	6ES5460-4UA13	6ES5465-7LA13
6EP1331-1SL11	6EP1331-2BA10	6EP1332-1SH42	6EP1332-1SH71	6EP1332-2BA20
6EP1332-4BA00	6EP1332-5BA00	6EP1334-1LB00	6EP1961-2BA00	6EP1961-3BA21
6EP3344-7SB00-3AX0	6EP3436-8SB00-0AY0	6EP4348-7RB00-0AX0	6EP8090-0CA00	6GK1102-4AA00

Published Stockoems products are linked to their exact product pages. Unlinked models remain plain text because no matching published page was found during the front-end search.

Send the required model, quantity, destination country, and available nameplate photos for a supply check.

Email: sales6@apterpower.com WhatsApp: +86 18159889985

Email Sales WhatsApp Sales

Tags :