Bently Nevada 330901-04-24-10-02-05 is an unarmored compact 3300 XL NSv probe for small-shaft vibration and position measurements.
Bently Nevada 330901-04-24-10-02-05 is an unarmored 3300 XL NSv proximity probe for installations with tight mechanical clearance or small shaft targets. Its official ordering code specifies a 1/4-28 UNF thread, 0.4 in unthreaded length, 2.4 in overall case length, 1.0 m total probe length, a miniature coaxial ClickLoc connector without protector, standard cable and multiple approvals. The PPS probe tip, AISI 304 stainless-steel case and 75-ohm FEP-insulated cable support radial vibration, position, tachometer, zero-speed and Keyphasor applications when used with the matching NSv system. Confirm all dimensions, cable length, connector and approval requirements before ordering.
| Item | Status |
|---|---|
| Product Condition | Original new |
| Availability | In stock |
| Warranty | With 1 year warranty |
| Shipping | Worldwide shipping coordination |
Condition, availability and warranty are Stockoems commercial information and are not manufacturer commitments.
| Parameter | Officially Confirmed Value |
|---|---|
| Manufacturer | Bently Nevada, a Baker Hughes Company |
| Complete Part Number | 330901-04-24-10-02-05 |
| Product Type | 3300 XL NSv unarmored proximity probe |
| Probe Thread | 1/4-28 UNF |
| Unthreaded Length | 0.4 in |
| Overall Case Length | 2.4 in |
| Total Probe Length | 1.0 m (39 in) |
| Connector and Cable | Miniature coaxial ClickLoc connector; standard cable |
| Agency Approval Option | Multiple approvals |
| Probe Tip Material | PPS |
| Probe Case Material | AISI 304 stainless steel |
| Cable | 75-ohm FEP insulated |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Maximum Rated Pull Strength | 220 N (50 lbf) |
| Probe Temperature | -52°C to +177°C operating and storage |
Supports proximity measurement where compact probe geometry and small targets are required.
Measures relative shaft vibration with the matching 3300 XL NSv transducer system.
Supports axial position measurement when installation geometry and target requirements are met.
Can support tachometer, zero-speed and phase-reference measurement applications.
It is an unarmored 3300 XL NSv proximity probe with a 1/4-28 UNF thread.
The code specifies 0.4 in unthreaded length and 2.4 in overall case length.
It has a 1.0 m standard cable and miniature coaxial ClickLoc connector without protector.
The final 05 option specifies multiple approvals.
Verify dimensions, cable length, connector, approvals and compatibility with the complete 3300 XL NSv system.
Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.
Verification, inspection, packaging and delivery coordination for 330901-04-24-10-02-05 procurement.
Model and suffix verification, condition confirmation and product-label comparison.
Technical compatibility review using only confirmed configuration and machine-interface data.
Product and label photo confirmation with visible-condition and completeness review.
Protective packaging, worldwide shipping coordination, tracking and customs documentation.
| Control Point | Service Scope |
|---|---|
| Model and suffix verification | Checks the complete requested and manufacturer-formatted part number. |
| Condition confirmation | Documents the agreed Stockoems commercial condition. |
| Technical compatibility review | Reviews confirmed configuration and installation requirements without assuming equivalence. |
| Product and label photos | Supports identity and visible-condition checks. |
| Protective packaging | Uses handling suitable for industrial monitoring hardware. |
| Worldwide shipping | Coordinates available carrier and route options. |
| Shipment tracking | Provides dispatch and tracking information after shipment. |
| Customs documentation | Prepares available commercial shipping documents. |
| Written warranty terms | States the agreed Stockoems warranty coverage in writing. |
| Return authorization process | Requires documented review before an approved return. |
| After-sales response | Coordinates order, documentation and post-delivery questions. |
Request the complete part number, clear label photos, written condition, traceable quotation terms, compatibility questions, packaging details, warranty wording and a documented return-authorization process.
Compare the exact suffix, electrical or mechanical configuration, approvals and machine interface. Similar appearance is not proof of compatibility.
Incomplete part numbers, reused photos, unverifiable labels, unsupported technical claims, vague warranty language and refusal to document return conditions are warning signs.
| 6EP3333-3SA00-0AY0 | 6ES7953-8LG30-0AA0 | 6ES7241-1CH31-0XB0 | 3VT8110-1AA03-0AA0 | 6ED1052-2FB00-0BA3 |
| 6SL5568-0XX00-0AA0 | 140DDO35300 | 140DDI35300 | 3RK2400-1DQ00-0AA3 | 6SL3210-5BE23-0UV0 |
| 6SY7000-0AA77 | 3VA99870UA10 | 6ES7924-0CC00-0AB0 | 7KM9300-0AE01-0AA0 | 6SL3054-0EE00-1BA0 |
| 6ES7194-4BC00-0AA0 | 6ES7953-8LF30-0AA0 | 3RK1901-0CB01 | 6ES7132-4BB01-0AB0 | 6ES7193-6BP20-0BB1 |
| QBM81-10 | QFM1660 | QX10 | 6ES7131-6BF01-0AA0 | 6ES7132-4BF50-0AB0 |
| 6ES7461-0AA00-7AA0 | ABB DO562 / 1SAP230900R0000 | EVDCU00E21 | XLS3000-CPUD | SCI 1000 |
| 3BSE038226R1 | K591N SFP-H10GB-CU3M 37-0961-03 | PXC001-ED | 3HE05894AAAA01 | EFCB12W-OE1 |
| M2PBMPP | W7752D2007 | ST-20 | SDV531-L33/PRP | ABB Bio0007 2RCA026772A0001D / 2RCA026773D |
| AGC/GS/3 100053070.10 | FMI-100BU | NP44 3HD | 242100.000 | 920NTNNEK00000 |
| AM-200 | G3780-822 2099A-G3SKMEM | WTS3B4BME/N | EST140331 | SU/S 30.640.1 EIB |
| IGC2231 | BA327C | BZMB1-A100 | MIT300 | ABB 746271 |
| DUS704W | IC694MDL916-CA | 700283690 | ABB 500MDD01 1KGT034200R001 | 2CDG 110 046 R0011 |
| ABB DA501 1SAP250700R0001 | PHCPS.9-5008W | OCM-DPR-85-PD-ST-ACV | PLT200 | LCAD03VLNOD |
| DA2 RGBHV 60-488-01 | ULFIM16AI-D37M-45-XOR-R2 | MU-NKD005 / PN: 51195153-005 | 330100-50-05 | ABB FCC/S 1.1.1.1 2CDG110210R0011 |
Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.
