Bently Nevada 330901-0-90-10-02-05 3300 XL NSv Proximity Probe

Bently Nevada 330901-0-90-10-02-05 NSv Probe Assembly
Bently Nevada 330901-0-90-10-02-05 NSv Probe Assembly
Bently Nevada 330901-0-90-10-02-05 NSv Probe Assembly
3300 XL NSv Proximity Transducer System

Bently Nevada 330901-0-90-10-02-05 3300 XL NSv Proximity Probe

A 3300 XL NSv probe identifier based on the 330901 1/4-28 UNF unarmored probe family.

Bently Nevada 330901-0-90-10-02-05 is associated with the 3300 XL NSv proximity probe family. The confirmed 330901 base identifies a 1/4-28 UNF threaded probe without armor. The NSv system supports narrow-side-view proximity measurements on rotating machinery and operates as a matched probe, extension cable and Proximitor Sensor system. The supplied complete suffix is not listed in the current official ordering structure, so this page does not assign cable length, case dimensions, connector choice, approval option or lifecycle status. Compare the complete product label, installed system length, mounting thread and associated NSv components before ordering.

Condition
Original new
Availability
In stock
Warranty
With 1 year warranty

Condition, availability and warranty are Stockoems commercial terms and are not manufacturer commitments.

Key Product Information

Manufacturer Bently Nevada
Complete Part Number 330901-0-90-10-02-05
Confirmed Base Order Code 330901
Product Type 3300 XL NSv Proximity Probe
Series 3300 XL NSv Proximity Transducer System
Case Thread 1/4-28 UNF
Cable Armor Without armor
Country of Origin USA
Product Condition Original new
Availability In stock
Warranty With 1 year warranty
Shipping Worldwide shipping coordinated after order review

NSv Measurement Architecture

Rotating machine target
330901-0-90-10-02-05
NSv proximity probe
Compatible NSv extension cable
3300 XL NSv Proximitor Sensor and monitor

The confirmed 330901 probe family forms the sensing end of a matched NSv transducer chain. Probe length plus extension cable length must agree with the selected Proximitor Sensor system length, and installation geometry must be reviewed for the machinery target.

Typical Applications

Radial shaft vibration
Relative shaft motion measurement where a compact NSv probe installation is required.
Axial position
Monitoring shaft position changes with an appropriate mounting arrangement.
Machine condition monitoring
Continuous proximity data supplied to compatible monitoring channels.
Tight installation spaces
Narrow-side-view probe geometry for constrained machinery locations.

Compatibility and Revision Notice

The complete identifier 330901-0-90-10-02-05 is retained exactly as supplied. Current official ordering information uses a two-digit first length option; therefore, configuration-specific lengths, connector details, approval option and lifecycle are not assigned here. Verify the product label, 1/4-28 UNF mounting, system length, extension cable, Proximitor Sensor and installed revision before purchase.

Product FAQ

What does the 330901 base identify?

It identifies a 3300 NSv proximity probe with 1/4-28 UNF thread and without armor.

Can the complete suffix be decoded from the current ordering table?

No. The first length segment is supplied as one digit, while the current official structure uses two digits.

What components form the NSv measurement chain?

A compatible probe, extension cable and 3300 XL NSv Proximitor Sensor form the matched transducer system.

Can a similar-looking probe be substituted?

Not without checking the complete order code, thread, system length, connector arrangement and associated components.

What evidence should be reviewed before ordering?

Review clear product and label photos, the installed system details, required mounting thread, cable arrangement and exact requested identifier.

Request Availability and Compatibility Review

Send us the complete part number, required quantity, destination country and product label photos. Our team will check availability, condition, compatibility requirements and shipping options.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

Procurement assurance

Industrial Automation Supply Support

Our service process connects part-number control, visual evidence, technical review, packing preparation and shipment documentation. Each step is designed to help end users, purchasing teams and engineers evaluate what is being offered before an order proceeds.

Eleven Procurement Quality Gates

01 · Model and suffix verification
The complete order code is checked character by character.
02 · Condition confirmation
The offered condition is stated clearly in the quotation and order record.
03 · Technical compatibility review
Known rack, display, revision and connection requirements are reviewed with the buyer.
04 · Product and label photo confirmation
Available product and label images are compared with the requested identifier.
05 · Protective packaging
Equipment and accessories are protected against handling and international transit risks.
06 · Worldwide shipping
Shipping options are coordinated for the destination after the order requirements are known.
07 · Shipment tracking
Available tracking details are shared after dispatch.
08 · Customs documentation
Commercial shipment documents are prepared for the confirmed order and destination.
09 · Written warranty terms
Warranty scope and conditions are documented before order completion.
10 · Return authorization process
Any return request follows written authorization and review steps.
11 · After-sales response
Order records, supplied evidence and reported issues guide follow-up communication.

Inspection, Packing and Technical Coordination

Industrial automation specialist verifying a supplied module label
Label details and the supplied identifier are reviewed against the order record.
Quality inspector preparing protected industrial modules for packing
Condition evidence and protective packaging are coordinated for the confirmed unit.
Automation technician reviewing rack installation compatibility
Engineers can compare rack, revision, interface and installation requirements before ordering.

How to Identify a Qualified Industrial Automation Supplier

What should a direct user verify first?

A qualified supplier should repeat the complete model and suffix, state the offered condition in writing, provide clear product and label evidence when available, and avoid replacing the requested part with a similar code without approval.

What should a purchasing professional request before placing an order?

Request a written quotation with the exact identifier, quantity, condition, warranty terms, shipping scope, return authorization procedure and seller contact details. The commercial documents should agree with the product evidence.

How can an engineer test supplier competence?

Ask configuration-specific questions about rack position, mating hardware, interface type, revision and connection method. A responsible supplier distinguishes confirmed facts from assumptions and asks for missing system information.

Which warning signs deserve extra caution?

Risk signals include altered or unreadable labels, vague condition descriptions, refusal to provide order-specific evidence, pressure to accept a different suffix, unsupported compatibility claims, unclear return terms, inconsistent payment details and promises of unverified quantities or delivery dates.

Why does documentation matter after shipment?

Matched order records, packing evidence, tracking details, customs documents and written warranty terms give buyers a consistent basis for receiving inspection and after-sales communication.

Quality control
Model, label, condition and supplied evidence are checked in a documented sequence.
Logistics coordination
Packaging, carrier options, tracking and destination documents are aligned with the confirmed order.
After-sales communication
A named sales contact links the quotation, shipment record, written terms and reported issue.

Talk With Our Industrial Automation Team

Share the complete part number, required quantity, destination country and available label photos for a structured supply review.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

 
E70
Exact Model Index

Stockoems Advantage Model Selection

AAI143-H53 2012R 2CDG 110 168 R0011 3A99162G0 SB-4
GMA121.1E MPM2400 PCI-E 8GB PX2810403-78-C R1N53 0R1N53 RAX510K IQ8QUAD
TVAC10100 QUINT4 025-40900-007 TRE 40-55L ULXS4 TA80DU-63
DT72 D454.F.CE NRFC212F010 72604R-TP / XF-1250 ADC8220/22
RM8I KNX 4940215 QFA2060D B&K 4001A 81545-01 BM828RII
150345 Ku-12.25-12.75 M2150-2DBC 7000-5376-1 152100 700-CF220ZS RTX40 416654 16-22A
5WG1512-1AB01 ZN1CL-kLIC-DI SSP81 VC7934ZZ11/U L24734-F655-A5
MR51e REX-C10 REX-C10FNC-M CTL-R2.2 S-70001 1-406584 VS00P10KNX
DS6878-TRBU0100ZWR QBE63-DP01 ABB CI592 / 1SAP221200R0001 CS31 METSEPM1200 026590 RS485
LBB1856/00 LBB1957/00 ADV551-32DO 51028365-1 175G9058 Sb-4bs-eu/Bg R1L-B
M-ME-C202.32 RXV-35-4K MH5000BLKC 2cdg510004R0011 FVS318AU
1771-P6S/B C75825A A4-F8C El-805u-d-868-500m FG1010-320-BL DX-TX-WP-BL
ABB 1SVR730020R0200 Q100 PP056TB1-113 NS-ATA7003 CM-LBPS900
GE RMS7 RMS79025110 EZ512-DC-RC/ EZ512-DC-RC-2 TT-MJC-7M/25FT-PC BZMC1-A80-BT GE 430223001 / T-200

Models were randomly selected from the customer-provided TXT lists. Only exact Stockoems product matches are linked; unlinked entries remain plain text.

Request a Model Check

Send the complete manufacturer, model, suffix and required quantity so our team can verify the requested listing and supply details.

Email: sales6@apterpower.com   |   WhatsApp: +86 18159889985

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Looking for News & Events?
Contact Us #
+8618159889985

Our hours

Monday–Sunday: 8:30 AM–5:00 PM
(Eastern Time)

Home

Products

whatsApp

contact