Armored extended-temperature probe with 3/8-24 UNF thread, 2.5-inch case and 5 m total length.
Bently Nevada 330192-00-25-50-00 is a 3300 XL 8 mm Extended Temperature Range proximity probe for non-contact shaft vibration and position measurement. The configured probe uses a 3/8-24 UNF thread and integral armor. Its ordering code specifies 0.0 inch unthreaded length, 2.5 inch overall case length, 5.0 m total probe length and no agency approval option.
The 5 m probe is intended for a 5 m 3300 XL Proximitor Sensor system. The complete probe, extension-cable and Proximitor Sensor length must be checked as one matched system before procurement or replacement.
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Complete Part Number | 330192-00-25-50-00 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Official Lifecycle Wording | Not stated for this complete configured part number in the current official datasheet |
| Probe Type | 3300 XL 8 mm ETR proximity probe with armor |
|---|---|
| Thread | 3/8-24 UNF |
| Unthreaded Length | 0.0 in (code 00) |
| Overall Case Length | 2.5 in (code 25) |
| Total Probe Length | 5.0 m / 16.4 ft (code 50) |
| Agency Approval Option | Not required (code 00) |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| ETR Cable | 75 ohm triaxial PFA-insulated probe cable |
| Armor | Flexible AISI 302 or 304 stainless steel with FEP outer jacket |
| Nominal Probe DC Resistance | 8.73 ± 0.50 ohm for a 5 m probe |
| System Linear Range | 2 mm (80 mils), approximately 0.25 to 2.3 mm from target |
| ETR System Scale Factor | 7.87 V/mm (200 mV/mil) ± 6.5% for 5 m and 9 m ETR systems |
Applied in compatible eddy-current transducer systems for radial vibration, axial position and shaft displacement measurements on rotating machinery.
The PFA-insulated ETR lead supports installations requiring the manufacturer’s extended-temperature probe construction and armored mechanical protection.
The current Baker Hughes datasheet verifies the 330192 ETR ordering family and the complete 330192-00-25-50-00 configuration. It does not publish a lifecycle label for this full configured part number. Availability and manufacturing status should therefore be checked at the time of quotation without assuming Active, Obsolete or Discontinued status.
It is an armored 3300 XL 8 mm ETR proximity probe with a 3/8-24 UNF thread and 5 m total length.
They specify 0.0 in unthreaded length, a 2.5 in case, 5.0 m total length and no agency approval option.
No. Baker Hughes states that 5 m probes are designed for the 5 m Proximitor Sensor. System length and component compatibility must be verified.
The current official datasheet does not assign a lifecycle wording to this complete configured part number.
Contact Stockoems for availability verification, system compatibility review, warranty terms and worldwide delivery coordination.
sales6@apterpower.com | WhatsApp: +86 181 5988 9985
Practical sourcing support for Bently Nevada 330192-00-25-50-00 and industrial automation spares.
We check the full manufacturer code, suffixes, probe construction and requested quantity before quoting.
We review system length, Proximitor Sensor fit, extension cable, thread and installation details supplied by the customer.
Stock condition, lead time, packaging, warranty scope and commercial terms are confirmed before order placement.
We coordinate export packing and worldwide shipment with traceable logistics documentation.
Dedicated staff review customer part-number lists and organize sourcing follow-up.
Application information and compatibility questions are consolidated before confirmation.
Commercial documents, export packaging and delivery tracking are coordinated through one contact channel.
Send your model list for stock verification, cross-checking, warranty terms and worldwide delivery coordination.
sales6@apterpower.com | WhatsApp: +86 181 5988 9985
