Bently Nevada 143493-00-080-080-70-00 3300 NSv Probe

143493-00-080-080-70-00 Custom/legacy 3300 NSv narrow-side-view proximity probe product and nameplate

Inquiry now

BENTLY NEVADA PART · OFFICIAL DOCUMENTATION REVIEWED

143493-00-080-080-70-00

Custom/legacy 3300 NSv narrow-side-view proximity probe

Buyer Summary

Bently Nevada 143493-00-080-080-70-00 is a custom or legacy 3300 NSv proximity probe order used where side-view clearance or target size limits standard 5 mm and 8 mm probes. The complete legacy code should be checked against the installed nameplate.

Accuracy note: Values below are limited to the exact order-code information and system data supported by public Bently Nevada documentation. Nameplate, machine BOM and project drawings remain controlling for replacement selection.

143493-00-080-080-70-00 Ordering-Code Details

Field	Verified interpretation
Full order code	143493-00-080-080-70-00
System family	3300 XL NSv proximity transducer system
Thread stated on installed order	3/8-24 UNF — verify against original label
Case / installation dimensions	Legacy 080 / 080 fields — preserve exactly; verify drawing
Probe cable length	70 — 7.0 m
Approvals	00 — no approval suffix on the legacy order

Official Technical Information

Parameter	Published value / selection note
System linear range	1.5 mm (60 mil)
Recommended gap	1.0 mm (40 mil)
Scale factor	7.87 V/mm (200 mV/mil)
Frequency response	0 to 10 kHz, +0/-3 dB typical
Minimum flat target	8.9 mm diameter; 13 mm recommended
Probe tip material	Polyphenylene sulfide (PPS)
Probe case material	AISI 304 stainless steel

Application and Compatibility

NSv probes are used on centrifugal air, refrigeration and process-gas compressors and other machines with restricted counterbore, side-view or rear-view clearance. They also support radial vibration, axial position, tachometer, zero-speed and Keyphasor measurements when correctly configured.

Match the label
Confirm every character in 143493-00-080-080-70-00 and photograph the installed nameplate.

Match the system
Provide the machine model, monitor channel, existing sensor chain and project BOM.

Ordering 143493-00-080-080-70-00

For an accurate quotation, send the information below. Availability, condition, lead time and commercial terms are confirmed in the quotation and are not assumed from the product page.

RFQ item	What to provide
Exact identification	143493-00-080-080-70-00
Quantity and condition	Required units and requested condition
Installed evidence	Clear nameplate, connector, mounting and complete product photos
System details	Machine / monitor model, sensor-chain part numbers, BOM or drawing reference
Delivery	Destination country and required date

143493-00-080-080-70-00 FAQ

What is 143493-00-080-080-70-00?
Bently Nevada 143493-00-080-080-70-00 is a custom or legacy 3300 NSv proximity probe order used where side-view clearance or target size limits standard 5 mm and 8 mm probes. The complete legacy code should be checked against the installed nameplate.

Can a similar part number be used instead?
Do not assume interchangeability. Match the full order string, mechanical configuration, system length or connector details, approvals and the machine BOM.

Why are some values described as system-level specifications?
Bently Nevada publishes many performance values for a complete matched transducer system. A probe, cable or Proximitor component alone does not guarantee those values when combined incorrectly.

What should be sent with an RFQ?
Send the exact code, quantity, destination, installed label photos, machine model and all connected sensor-chain part numbers.

Official Bently Nevada Reference

Bently Nevada 3300 XL NSv Datasheet 147385

Request a Quote for 143493-00-080-080-70-00

Send the exact part number and installed label for a compatibility-focused quotation.

Email Inquiry WhatsApp Inquiry

Related resources: Browse Bently Nevada products | View related model

BENTLY NEVADA PROCUREMENT SUPPORT

Service for 143493-00-080-080-70-00

Our RFQ process focuses on exact identification and documented compatibility for Custom/legacy 3300 NSv narrow-side-view proximity probe.

1 · Part-number check
We record the complete 143493-00-080-080-70-00 order string and compare label evidence.

2 · Configuration review
System length, mounting, connector, approval and modification fields are reviewed where applicable.

3 · Official-data check
Public Bently Nevada datasheets are used for supported system and ordering information.

4 · Quotation and shipping
Condition, quantity, lead time, packing, destination and commercial terms are confirmed in writing.

Information Required

Exact part number and quantity
Clear photos of the existing nameplate, connector and mounting
Machine, monitor and sensor-system model numbers
BOM, drawing or maintenance-record reference
Destination and requested delivery date

Compatibility notice: Similar descriptions do not prove interchangeability. Installation and machine-protection work must follow applicable Bently Nevada manuals and site procedures.

Email: sales6@apterpower.com WhatsApp: +86 181 5988 9985

MODEL SELECTION GUIDANCE

Related Models for 143493-00-080-080-70-00

The models below are related by product family or ordering structure. They are not presented as automatic replacements.

Model / family	Selection difference
330908	Current standard 3/8-24 NSv probe without armor
330909	Current standard 3/8-24 NSv probe with armor
143493 legacy/custom order	Do not replace solely by thread and cable length; confirm dimensions and system BOM

Before Choosing an Alternative

Compare every character of the order code.
Match system length, probe/cable/sensor family and electrical configuration.
Confirm thread, case, penetration, connector, armor and mounting details.
Verify approval suffixes and custom MOD fields.
Use the machine BOM or Bently Nevada project documentation as the final reference.

Need a model check? Send both labels and the machine/system information to sales6@apterpower.com.

Tags :