Extension Cable Capacitance：69.9 pF/m (21.3 pF/ft) typical

Standard cable：75Ω triaxial, fluoroethylene propylene (FEP) insulated probe cable in the following total probe lengths: 0.5, 1, 1.5, 2, 3, 5, or 9 meters.

Extended Temperature Range cable：75Ω triaxial, perfluoroalkoxy(PFA) insulated probe cable in the following total probe lengths: 0.5, 1, 1.5, 2, 5, or 9 meters

Tensile Strength (MaximumRated)：330 N (75 lbf) probe case to probe lead. 270 N (60 lbf) at probe lead to extension cable connectors.

Connector Material：Gold-plated brass or goldplated beryllium copper.

Standard Cable：-52°C to +177°C (-62°F to +350°F)

Extended Temperature Range Cable：-52°C to +260°C (-62°F to +500°F)

Specific Application

• Connecting 3300 5mm or standard 8mm proximity probes to 3300 XL Proximitor sensors on fluid-film bearing machinery demanding a total 9.0-meter system loop layout.
• Extension cable installation through tight internal casings where raw cable routing requires pre-installed connector protectors to seal out harsh ambient humidity or heavy moisture.
• Rotating machinery installations (such as critical industrial pumps, steam turbines, or high-speed gearboxes) requiring the line to pass directly through active oil-mist zones without leaking process fluids through the cable body.

Competitive Advantage

• Pre-installed Connector Protectors: This unit comes from the factory equipped with robust fluorosilicone connector protectors. This eliminates field assembly time and guarantees superior environmental sealing against moisture ingress right out of the box.
• Leak-Proof FluidLoc Cable Base: Unlike standard aftermarket instrumentation wires that permit hot industrial lubricants to wick through inner air gaps, the genuine FluidLoc core builds a structural block inside the cable to completely arrest fluid leakage through the wire interior.
• Tool-Free ClickLoc Reliability: The line features corrosion-resistant, gold-plated brass ClickLoc coaxial terminals that firmly click into place upon finger-tight matching. This engineered locking action ensures constant contact pressure and prevents loosening due to heavy industrial machinery vibrations.