The 330101-00-30-90-02-05 is a standard-mount 3300 XL 8mm proximity probe featuring a 3/8-24 UNF thread, a 3.0-inch overall case length, and a fully threaded body without unthreaded sections. Designed with a 9.0-meter integrated unarmored cable and a miniature coaxial ClickLoc connector, this hazardous area certified unit works seamlessly with 9-meter 3300 XL Proximitor sensors to deliver highly accurate vibration tracking and stable shaft displacement monitoring without requiring an intermediate extension cable.

Features and benefits

• Provides stable signal output for precise condition monitoring

• Suitable for both dynamic vibration and static displacement detection

• Designed for high reliability in critical rotating equipment

• Wide temperature stability ensures consistent performance

• Modular design allows quick replacement and reduced downtime

• Supports integration across 3300 series systems for versatility

Specific Application

• Radial vibration and axial thrust position measurements on heavy-duty industrial rotating machinery (e.g., fluid-film bearing machines, centrifugal compressors, and steam turbines).
• Long-distance direct sensor installations where intermediate junction boxes are omitted, connecting the probe cable straight from the machine housing to a remotely located Proximitor sensor up to 9.0 meters away.
• Critical tachometer reference, speed tracking, or Keyphasor measurements on industrial motor shafts requiring full compliance with API 670 operational and configuration standards.

System Compatibility, Alternative Models, and Differences

• System Compatibility:

Fully compatible with the Bently Nevada 9-meter 3300 XL Proximitor Sensor (such as 330180-90-AA or 330180-91-AA). Since this probe has a 9.0-meter integral cable, it must connect directly to a 9-meter Proximitor sensor without utilizing an intermediate extension cable. It is backward compatible and physically interchangeable with non-XL 3300 series 5mm and 8mm transducer components, fully satisfying API 670 requirements.

• Alternative Model (Standard 5-Meter Loop Sibling):

330101-00-30-10-02-05 (3300 XL 8mm Probe, 1.0-Meter Integral Cable)

• Key Differences between 330101-00-30-90-02-05 and 330101-00-30-10-02-05:

Transducer Cable Architecture: The 330101-00-30-90-02-05 contains a 9.0-meter integral cable that connects directly to the sensor module, whereas the alternative features a shorter 1.0-meter cable that requires a separate 4.0-meter or 8.0-meter extension cable to complete the loop.

Proximitor Matching Rules: The 9.0-meter integral probe must be paired exclusively with a 9-meter Proximitor sensor. The 1.0-meter cable variant is designed primarily for standard 5-meter or 9-meter loops using independent extension leads.

System Calibration Tolerance: Transducer loops utilizing 9-meter systems exhibit an Incremental Scale Factor (ISF) tolerance of 7.87 V/mm (200 mV/mil) ± 6.5%, while a pure standard 5-meter loop achieves a tighter ± 5% tolerance window.

Ordering Information

FAQ

Q1: What does the Bently Nevada 330190-085-01-05 measure?
A1: It measures both vibration and position of rotating machinery with high accuracy.

Q2: Is the 330190-085-01-05 compatible with other 3300 series components?
A2: Yes, it is fully interchangeable with other 3300 XL and non-XL 5 mm and 8 mm components.

Q3: Does the 330190-085-01-05 meet industry standards?
A3: Yes, it complies with API 670 standards for accuracy, linear range, and temperature stability.

Q4: Can the 330190-085-01-05 operate in harsh environments?
A4: Yes, it is designed for reliable performance in demanding industrial conditions.

Q5: Is calibration required before using the 330190-085-01-05?
A5: No, the system eliminates the need for individual component calibration.

Accessories