The 130539-14 is a Bently Nevada high-performance accelerometer interconnect cable featuring an integrated 3-socket plug with a fluorosilicone elastomer boot and a 14-foot length. Fully compatible with 330400 and 330425 acceleration transducers, this heavy-duty shielded twisted-pair unit works seamlessly to deliver low-noise vibration signal transmission and stable industrial network communication in demanding machinery environments.
Applications
3‑conductor shielded cable for accelerometer systems.
Suitable for critical machinery vibration monitoring.
Works with 330400 and 330425 accelerometers.
Designed for bearing housing and casing installation.
Length range: 0.6 m to 30 m for flexible setup.
Ensures stable signal transmission for accurate measurement.
Features and benefits
- Premium 18 AWG Conductors: Utilizes heavy-duty 18 AWG (1.0 mm²) copper wiring to provide an ultra-low electrical impedance path, drastically reducing analog signal attenuation across long-distance industrial instrumentation networks.
- Integrated Fluid Protection Boot: Equipped with a molded fluorosilicone elastomer boot directly over the 3-socket MIL plug to form a highly resilient barrier that isolates the critical electrical junction from harsh lube oils and corrosive chemical mists.
- Low-Noise Twisted Shielding: Incorporates an advanced braided shield layer wrapped around twisted conductor pairs to isolate and block electrostatic noise, plant ground currents, and cross-talk interference from disrupting the dynamic raw signal output.
- Flexible Conduit Optimization: Engineered with a smooth, heavy-duty outer elastomer insulation layer tailored to provide exceptional flexibility and ease of routing during tight pull-through maneuvers inside rigid industrial conduit piping systems.
Ordering Information Table
|
Model Number Component |
Option Code |
Description |
|
Base Model |
130539 |
3-conductor shielded 18 AWG cable with 3-socket plug and fluorosilicone boot |
|
A: Cable Length Option |
14 |
14 feet (approximately 4.26 meters) continuous length ordered in 1.0 ft increments |
FAQ
Q1. What is the model number of this cable?
A1. The model number is 130539-14.
Q2. What type of cable is 130539-14?
A2. It is a 3-conductor shielded cable.
Q3. What wire size does it use?
A3. It uses 18AWG (1.0 mm²) wire.
Q4. What is the length range of this cable?
A4. Length ranges from 0.6 m to 30 m (2.0 ft to 99 ft).
Q5. What devices does this cable work with?
A5. It is used with Bently Nevada 330400 and 330425 accelerometers.
Accessories
| 127088 | 330400 and 330425 Accelerometer User Guide |
| 00531080 | Mating connector for 330400 and 330425 Accelerometers. |
| 37439-01 |
For use with serial numbers NOT preceded with the letter “G”. Mounting Base, ¼-28 to ¼-28. Reduces base strain sensitivity. |
| 37439-02 |
For use with serial numbers NOT preceded with the letter “G”. Mounting Base, M8X1 to M8X1. Reduces base strain sensitivity |
| 43217 | Accelerometer Mounting Kit used with extension part number 108576-01 and O-ring part number 04290422 to allow room for the 330400 or 330425 accelerometer. (See separate datasheet, document 141630.) |
For the quick assistance message us on WhatsApp at 
