Siemens 6ES7138-4FB03-0AB0 SIMATIC ET 200S 4 F-DO PROFIsafe Module

Siemens 6ES7138-4FB03-0AB0 four-channel 24 V DC 2 A fail-safe output electronics module
Siemens 6ES7138-4FB03-0AB0 four-channel 24 V DC 2 A fail-safe output electronics module
Siemens 6ES7138-4FB03-0AB0 four-channel 24 V DC 2 A fail-safe output electronics module

Siemens 6ES7138-4FB03-0AB0 SIMATIC ET 200S 4 F-DO PROFIsafe Module

Four fail-safe PROFIsafe outputs for 24 V DC, 2 A ET 200S safety applications.

Product Overview

Siemens 6ES7138-4FB03-0AB0 is a SIMATIC DP electronics module for the ET 200S distributed I/O system with four fail-safe digital outputs over PROFIsafe. Siemens specifies 24 V DC, 2 A outputs, a 30 mm overall width and use up to Category 4, SIL 3 and PL e within the documented system design. The module can also be used in a PROFINET configuration with IM 151-3 HF. Safety configuration, terminal module, interface module, project data and proof-test procedures must be independently verified before replacement.

Commercial Status

Manufacturer Siemens
Complete Part Number 6ES7138-4FB03-0AB0
Product Family SIMATIC ET 200S F-DO
Product Lifecycle Product Cancellation
Official Lifecycle Note Siemens SiePortal lists End Product Lifecycle, states that the main product is discontinued and identifies 6ES7138-4FB04-0AB0 as the successor product.

Verified Technical Data

Parameter Officially Verified Value
Distributed I/O System SIMATIC ET 200S
Module Type Fail-safe digital output electronics module
Safety Communication PROFIsafe
Number of Fail-Safe Outputs 4 F-DO
Rated Output Voltage 24 V DC
Rated Output Current 2 A
Overall Width 30 mm
Safety Capability Up to Category 4 / SIL 3 / PL e
PROFINET Use Supported with IM 151-3 HF configuration
Official Successor 6ES7138-4FB04-0AB0
Packaging Dimensions 8.8 x 6.5 x 3.8 cm
Net Weight 0.097 kg
Country of Origin Germany

System Fit and Applications

Fail-Safe Output Control

Switches documented safety-related DC loads within an approved ET 200S PROFIsafe design.

ET 200S Safety Stations

Fits verified ET 200S terminal and interface-module configurations.

PROFINET Safety Integration

Can be used with IM 151-3 HF when the complete PROFINET safety configuration is validated.

Compatibility and Procurement Checks

  • Confirm the complete article number 6ES7138-4FB03-0AB0 on the installed electronics module.
  • Verify the ET 200S terminal module, interface module, slot, 24 V DC supply and field-load current.
  • Confirm PROFIsafe addresses, safety project data, firmware and validation records before replacement.
  • Review the required Category, SIL and PL level within the machine safety assessment.
  • Evaluate 6ES7138-4FB04-0AB0 only through a documented safety and compatibility review.

Lifecycle Note

Siemens currently shows this exact fail-safe output module at End Product Lifecycle and identifies 6ES7138-4FB04-0AB0 as its successor. Because the module is part of a safety function, procurement and replacement require exact hardware matching, validated project data and an approved safety-engineering procedure.

Frequently Asked Questions

What is Siemens 6ES7138-4FB03-0AB0?

It is a SIMATIC ET 200S electronics module with four fail-safe PROFIsafe digital outputs.

What are the output ratings?

Siemens specifies four outputs rated for 24 V DC and 2 A.

Which safety levels are listed?

The official description states use up to Category 4, SIL 3 and PL e within the documented system design.

Can it be used in a PROFINET configuration?

Yes. Siemens states that it can be used with IM 151-3 HF in a compatible PROFINET configuration.

What should be checked before ordering?

Confirm the full suffix, terminal and interface modules, safety project, PROFIsafe settings, firmware, load data and validation requirements.

Verify 6ES7138-4FB03-0AB0 Before Procurement

Contact Stockoems for availability verification, compatibility review, warranty terms and worldwide delivery coordination.

Email: sales6@apterpower.com   |   WhatsApp: +86 181 5988 9985

Email SalesWhatsApp Inquiry

Industrial Spare Parts Support for 6ES7138-4FB03-0AB0

Model verification, safety-context review, secure packing, worldwide delivery and post-sale coordination for an ET 200S F-module.

Service Coverage

Exact Part-Number Verification

We check the complete Siemens MLFB, visible suffix, label details and requested quantity before quotation.

Compatibility Review

Terminal module, interface module, PROFIsafe project, 24 V DC loads and safety validation requirements can be reviewed with your engineering team.

Lifecycle Handling

Siemens identifies a successor F-module; replacement requires a documented safety and compatibility assessment.

Condition and Label Review

Available units can be checked for readable identification, connector condition, housing integrity and visible handling damage.

Secure Packing and Logistics

Appropriate antistatic protection, cushioning, carton selection, shipment tracking and export documentation are coordinated for worldwide delivery.

Post-Delivery Coordination

Our team remains available for order records, receiving questions and warranty communication after delivery.

Service Process

1. Send the Requirement

Provide the complete part number, quantity, destination and target delivery date.

2. Share System Context

Include system, slot, connector, field-load and product-label photographs when compatibility review is needed.

3. Confirm Supply Scope

Review availability, condition, included accessories, warranty terms, lead time and shipping method.

4. Pack and Dispatch

The verified item is packed, documented and dispatched after order confirmation.

Inspection and Logistics Support

Industrial spare parts inspection support

Identification Review

Article-number and visible-condition checks support a clearer procurement record.

Secure industrial module packing

Protective Packing

Modules are prepared with appropriate protection against handling and transit damage.

Worldwide industrial spare parts delivery

Worldwide Delivery

Courier, freight, tracking and export-document options are coordinated for the destination.

Important: Warranty scope, condition, supplied accessories and return terms should be confirmed in the quotation before purchase. Installation and commissioning must follow the site's approved electrical and automation procedures.

Verify 6ES7138-4FB03-0AB0 Before Procurement

Contact Stockoems for availability verification, compatibility review, warranty terms and worldwide delivery coordination.

Email: sales6@apterpower.com   |   WhatsApp: +86 181 5988 9985

Email SalesWhatsApp Inquiry
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Looking for News & Events?
Contact Us #
+8618159889985

Our hours

Monday–Sunday: 8:30 AM–5:00 PM
(Eastern Time)

Home

Products

whatsApp

contact