51199942-300 Product datasheet
Model number: |
51199942-300 |
|
Module Type: |
C300 System Backup Battery |
Manufacture: |
HONEYWELL |
|
Condition: |
Brand New |
Range of Product: |
Experion PKS |
|
Lead time: |
In Stock |
Weight: |
0.26 kg |
|
HS CODE: |
8537101190 |
Dimension: |
12.1×7.1×5.1cm |
|
MOQ: |
1 |
Product Origin: |
USA |
|
System: |
DCS |
Discontinued on: |
active |
|
Communication Service: |
Ethernet router |
51199942-300 Functional Description
If you have other request contact our team to get customized service
Honeywell |
51199942-300 |
Honeywell |
51196654-100 |
Honeywell |
MC-TAMT03 51309223-175 |
Honeywell |
51199932-200 51199932-200-RP |
Honeywell |
51196653-100 |
Honeywell |
MC-TAMR04 51305907-175 |
Honeywell |
51199930-100 SPS5713 |
Honeywell |
51196041-100 |
Honeywell |
MC-TAMR03 51309218-175 |
Honeywell |
51199568-100 |
Honeywell |
51195199-010 |
Honeywell |
MC-TAIH22 51204170-250 |
Honeywell |
51198651-100 SPS5785 |
Honeywell |
51195153-902 |
Honeywell |
MC-TAIH14 51305887-150 |
Honeywell |
51196990-500 |
Honeywell |
51195153-005 |
Honeywell |
MC-TAIH12 51304337-150 |
Honeywell |
51196742-200 |
Honeywell |
51195153-001 |
Honeywell |
MC-TAIH04 51305900-175 |
Honeywell |
51196694-928 |
Honeywell | 51195096-200 | Honeywell | MC-PLAM02 51304362-150 |
Honeywell | 51196694-904 |
Honeywell |
51109693-100B |
Honeywell |
MC-TAIH02 51304453-150 |
Honeywell |
51196655-100 |
Honeywell |
MC-TAMT04 51305890-175 |
Honeywell |
MC-PSIM11 51304362-350 |
Series C Power Systems
Maintaining power is critical to all systems. Failure to proactively maintain power supplies, batteries, and related equipment, or ignoring power system alarms, could lead to electrical failures. Depending on your configuration and process, power failures could potentially shut down a process or trigger loss of view, loss of control, or loss of process incidents.
Memory Battery Backup
The RAM Battery Backup subsystem provides unregulated 3.6 volts to the Series-C system from three nickel metal hydride cells. The minimum battery capacity must be 1100 ma hours (which can easily be supplied by three “C” cells). The main function of the power system, as related to RAM Battery backup, is to charge the cells as needed and monitor their health. If the batteries do not have sufficient charge to provide the specified output current, or there is a failure of the monitoring circuit, or the charger has failed, an alarm is to be generated. The alarm output is via a normally closed relay contact. The contact opens on alarm. The trial run RAM battery charger will include a low voltage cutoff for the battery pack set at 3.4 volt.